Top 1% contributor
What version of MATLAB are you using? Could you post the output of running 'ver'?
Answered 7 months ago
You can create the MDD using the MAKEMID command if there exists an IVI driver for your instrument.
Have you checked the IVI...
Answered 12 months ago
I think what you're trying to do is something like this:
Answered 1 year ago
2 years ago
Example scripts for generating arbitrary waveforms using MATLAB and downloading them to instruments.
Have you looked at the <http://www.mathworks.com/products/instrument/examples.html?file=/products/demos/shipping/instrument/acqu...
Answered 2 years ago
Wei, You might want to look at this example: http://www.mathworks.com/matlabcentral/fileexchange/24728-capturing-and-analyzing...
4 years ago
You're running into a limitation of the instrument's memory with your current approach. I'm not sure if the instrument you are ...
Properly parametrized MATLAB code to generate the waveform: Amp1 = 0.2; % Amplitude for each component of waveform Amp2 = 0.7; ...
Firdaus, The following code shows you how to create a waveform with two components that will fit into the function generator's ...
Firdaus, You might want to take a look at what they do here: http://cp.literature.agilent.com/litweb/pdf/5990-3465EN.pdf That...
Sarah, The Agilent 33120A has been replaced by the 33220A. Some of the functionality you are looking for may not be available i...
5 years ago
Hi, I think the additional "." at the end of the sentance messed up the link. It is: http://www.mathworks.com/matlabcentral/fi...
This adaptor was created and posted by Agilent on MATLAB Central at http://www.mathworks.com/matlabcentral/fileexchange/23579. ...
MATLAB® example to download arbitrary waveform data on Agilent MXG, ESG, or PSG signal sources.
5 years ago
Christopher, Have you contacted MathWorks technical support on this? Also, have you tried to use VISA GPIB from MATLAB (instead...
3 years ago
Kai, I am not sure if you are using the latest version of the adaptor linked here: http://www.mathworks.com/matlabcentral/file...
You should be able to modify this example to work with VISA-USB. http://www.mathworks.com/matlabcentral/fileexchange/12988
Faisal, Can you give more details of how you intend to use the data from the oscilloscope in Simulink? Note that the oscillosc...
Christope, As you have figured out - the behavior is very specific to some older instruments. When using VISA, there may be a ...
Have you seen this example? http://www.mathworks.com/products/instrument/demos.html?file=/products/demos/shipping/instrument/a...
2 years ago
Hi Wei, One thing you can do is send the :DIG command and then loop until the return of *OPC? indicates that the measurement is...
This adaptor is written and maintained by Agilent. Additionally, from the error message it seems like what you are seeing is a h...
Roy, You might want to try the MDD driver available here: http://www.mathworks.com/matlabcentral/fileexchange/22225
6 years ago
Hi Sajh, You may want to post your solution to the newsgroup so others who might have this requirement in the future may be abl...
Have you contacted technical support ? http://www.mathworks.com/support/contact_us/index.html
1 year ago
Hello Natanel, You may want to consult the programmer manual of the instrument for the right SCPI commands to use. If you look ...
Can you provide more details: 1) What is the version number of the IVI driver for the 33220A are you using? 2) What version of ...
Frank - there are known issues with the Agilent IVI driver for the 33220a. Have you contacted MathWorks support to see if they h...
Join the conversation