Community Profile

Contact

Professional Interests: signal processing, biomechanical simulation, biomechanics, quantitative ultrasound

Top 5% contributor

Hi Paria, you can try this: Fs = 1e9; % Hz - Signal Frequency N = 5; % Number of cycles Fc = 20*Fs; % Hz - Samp...

4731 views

Responded 5 years ago

Unfortunately, I already had K-Lite installed on my computer! I still haven't found a proper solution. Cheers, Claudio

4229 views

Responded 2 years ago

Hello Jorge, No, I could not solve it. I work around the problem by piloting VirtualDub from Matlab through scripts; I export t...

Hello, I am having some problems opening an mp4 file in Matlab (7.13.0.564 (R2011b) 64 bit, Windows 7). mminfo gives this error...

Posted 3 years ago

Update: It turns out that this "Font cmss10 is not supported" error is a Matlab bug. They are working to fix this!

3930 views

Responded 4 years ago

Hi, In version 2010b (in Windows XP) I used to use this definition for my texts and labels: xlabel('\textsf{Speed [m/s]}', 'int...

Posted 4 years ago

Hi, I am experiencing big issues with Matlab graphics. Whenever I stop (CTRL^C) a script which is plotting a figure, the figure...

2517 views

Posted 5 years ago

You should also assign a0 and a1 BEFORE usinge them: a0=p(3); a1=p(2); a2=p(1); f=a0+a1*x+a2*x.^2;

1551 views

Responded 3 years ago

Hi Jawad, I think this might do the trick: targets = [zeros(1,2000) ones(1,2000)]; targets_1 = targets == 0; targets_2 = targe...

1291 views

Hi Veda, you might want to look up xlsread and xlswrite on Matlab's help. Good luck! Claudio

1225 views

You're welcome, but please be aware that "global time ticking" is not a keyword!:D That was just to point out that there is not ...

1121 views

Hi, I would consider the loop as the global "time" ticking, so each particle has to obey the same timing. You can model all the ...

Hi Tiera-Brandy, It's not easy to answer you without knowing what is in "assig1" and "assig2", and what your equations model. H...

1117 views

Hello Walk, You can use the anova1(X) function. From the Matlab help: "In a one-way analysis of variance, you compare the mean...

1060 views

Hi, I didn't completely understand the structure of your cells, but you could try with : while sum(system{3,5}(:) == 0) < 3*n e...

950 views

Hi lav, you might start by typing "guide" in the matlab command line. It is the Matlab Layout Editor. Good luck, Claudio

882 views

Well, I could not find a solution but I did find a workaround, if anyone has the same problem. Instead of feeding the card a fi...

680 views

Responded 6 months ago

Hi Bilgehan, It says "Elapsed time is 1.067399 seconds.". If I feed it a 5 seconds signal, the elapsed time is 3 seconds, 5 sec...

Hi, I am having a problem with analog output signal using a NI-DAQ 6001. I set the output rate at 1000 scans/second, queue a 30...

Posted 6 months ago

Hi Alice, Try using x=max(M(:)); I think M might be a matrix so max is giving you the maximum value of each column. Type "hel...

185 views

Responded 1 month ago