I do Technical Marketing for RF and Mixed-Signal products at MathWorks. I am located in Eindhoven, The Netherlands.
Top 5% contributor
Converting S-parameters can be done, but it is not compulsory. I can imagine that you might want to do it when you ...
Answered 6 months ago
The problem is in the network LBC2R_Obj: it is built as a series, while I think that you wanted to have a cascade ...
Answered 2 years ago
8 years ago
This demo shows how a fixed-point cordic algorithm to calculate a phase from polar coordinates (arct
7 years ago
2 years ago
I built a very simple main function invoking the function RF_ReadTouchstone, and I managed to compile and execut...
Answered 4 days ago
I think I would recommend the following approach:
S = sparameters('Data.s2p'); % read the touchstone file
Answered 16 days ago
probably the easiest way to build a complex rectangular waveform is to use two signal generators (one for the ...
Answered 2 months ago
From the RF Toolbox documentation:
The delay factor is a scaling factor that controls the amount of delay to fit to th...
The RF Toolbox documetation references this article "Mixed-Mode S-Parameter Characterization of Differential Structures" ...
in SimRF you have two modelling technologies: Equivalent Baseband and Circuit Envelope. Both technologies are suit...
Answered 8 months ago
Apologies for the late reply.
The SimRF phase shift block applies a rotation to the carrier frequency. For example, i...
Answered 1 year ago
I assume you are referring to the phase shift block of the Circuit Envelope library in SimRF. You can find an example of ...
For this type of questions I would recommend to directly contact MathWorks technical support. I will give a sh...
The direct conversion receiver demo uses two complex modulated input signals: the first is centered around 2.45GHz an...
If you are using components from the Equivalent Baseband library, you can plot the S-parameters of the overall cas...
1 year ago
Join the conversation