Top 5% contributor
reduce 'samplesPerTrigger' and try plotting
Answered 2 years ago
data i= the voltage value obtained from ur pixel output
i want see the process timing and how much the program is taking to execute at all stages , so i tried using profiler view and...
Asked 2 years ago
I need to read all the pixels of a sensor to process later. I successfully did that too. But my doubt is, my code ta...
try using string to num conversion
in case of magic(n) and rand(n) an n by n matrix is created wit magic and pseudorandom elements respectively ,
how i can...
i want to enable rows of a pixel by giving logic high to them ,
I want write a FOR loop so that
first 000000 then
i have a DAQ which has a capability to store 4095 samples in FIFO , i want to store some data and which comes from a sensor via...
i have ni DAQ card , time consumed by triggering(start(Ai)) and extracting(getdata(ai)) is too much , how can i reduce it ??
daq used :NI USB 6255
I am using the above mentioned data acquisition card to get data from the sensor in the whole proces...
i have written the code to acquire data from a data acquisition card ,
i want know the time taken at each stages to acquire da...
i have a for loop
for i =0:1023
putvalue (dio, data)
start (ai); % starting analog input
i am using data acquisition card(NI 6255) to get the data from the thermal sensor,
at present or by default i'm a...
i hava data(voltage ) from which i want plot 1000 samples each generating at 1 mili second ,
if i use hist (data), i need t...
i have DC voltage(2.5V) which i want to plot using NI USB 6255, whether i should use the analog input or digital HW ch...
I have used NI-6255 for extracting the variable voltages from the thermal sensor array of pixels by addressing each pixel
DAQ CARD USED :NI-6255
Needed a code to plot the acquired data ,
Problem faced : when the signal from function generator is...
i have sensor which gives voltage output based on change in radiant temperature, the plot i am doing now is voltag...
i am using NI DAQ USB 6255 for data acquisition , i need to acquire the voltages from 1024 pixels so i am using "for loop " to a...
what is integration time refering to adc switches etc
this gives the output as follows , for every binary value of "m" i get to rea...
i am using spectrum analyzer through GPIB i wanna write code get the plot's ascii data into my computer u...
i am using NI DAQ USB 6255 for data acquisition , i need to acquire the voltages from 1024 pixels so i am using "for loop " to ...
i am using adata acquisition card to extract the voltage valoues from a sensor , the problem wat i am facing is, the tme...
DAQ CARD:NI USB 6255
data should be acquired from a sensor through DAQ ,
Task: give a pixel address to acquire a data fro...
i have a set of voltage values , i want to display them as a matrix of 32 by 32 size in command window .
i have a data i.e voltage values which are varying at a faster rate ,
how to show them as a grayscale image with 32 by 32 s...
this is how i address each pixel and
this is address the of 1st pixel , i ...
i'm not be able to acquire data and plot using below mentioned code for ni6255 DATA ACQUISITION card .
plz any one help.
Join the conversation