Image Acquisition Toolbox™ 3.1

Supported Hardware - Matrox Imaging

The table below lists the Matrox frame-grabber boards supported by the Image Acquisition Toolbox. For detailed information about a board listed here, please visit the Matrox Imaging Web site.

The Image Acquisition Toolbox requires MIL or MIL-Lite to function with these frame-grabber boards. Refer to the online help instructions to determine which version of MIL-Lite you own.

If you want to request support for a board not listed in this table, please complete the form at the bottom of this page.

Matrox Imaging

Supported Hardware
Bus/Form Factor	Product Name	Minimum Version Required
AGP	Orion	MIL or MIL-Lite 7.0 or above
Compact PCI	Meteor-II	MIL or MIL-Lite 7.0 or above
	Meteor-II/Multi-Channel	MIL or MIL-Lite 7.0 or above
PC/104+	Meteor-II/Digital	MIL or MIL-Lite 7.0 or above
	Meteor-II/Multi-Channel	MIL or MIL-Lite 7.0 or above
	Meteor-II/Standard	MIL or MIL-Lite 7.0 or above
PCI	Corona-II	MIL or MIL-Lite 7.0 or above
	CronosPlus	MIL or MIL-Lite 7.0 or above
	Genesis-LC	MIL or MIL-Lite 7.0 or above
	Meteor-II/1394	MIL or MIL-Lite 7.0 or above
	Meteor-II/Camera Link	MIL or MIL-Lite 7.0 or above
	Meteor-II/Digital	MIL or MIL-Lite 7.0 or above
	Meteor-II/Multi-Channel	MIL or MIL-Lite 7.0 or above
	Meteor-II/Standard	MIL or MIL-Lite 7.0 or above
	Orion	MIL or MIL-Lite 7.0 or above
PCI-X	Helios XCL	MIL or MIL-Lite 8.0 or above
	Solios XCL	MIL or MIL-Lite 8.0 or above
	Helios XA	MIL or MIL-Lite 8.0 or above
	Solios XA	MIL or MIL-Lite 8.0 or above

 

Request Additional Hardware Interface Support

*Indicates Required Information *Hardware Manufacturer Comments *E Mail (Format must be valid, e.g., name@yourdomain.com) We will not sell or rent your personal contact information. See our privacy policy for details.