Image Acquisition Toolbox 4.2
Supported Hardware – Manufacturer - QImaging
The table below lists the QImaging IEEE 1394 (Fire Wire) products supported by Image Acquisition Toolbox on 32-bit Windows only. For detailed information about a product listed here, please visit the QImaging Web site.
The Image Acquisition Toolbox requires QCam driver 1.90.1 to use QImaging hardware. For additional information refer to the troubleshooting section on QImaging hardware.
To request support for a product not listed in this table, complete the Additional Hardware Interface Support form at the bottom of this page.
| Supported Hardware | |
|---|---|
| Interface | Product Name |
 IEEE 1394 |
Intensified Retiga Extended Blue |
| Intensified Retiga Standard | |
| MicroPublisher 3.3 | |
| MicroPublisher 3.3 Cooled | |
| MicroPublisher 5.0 | |
| MicroPublisher 5.0 Cooled | |
| PMI 4201 Class 1 | |
| PMI 4201 Class 2 | |
| PMI 4201 Class 3 | |
| QICAM 12-bit Color Fast 1394 | |
| QICAM 12-bit Color Fast 1394 Cooled | |
| QICAM 12-bit Mono Fast 1394 | |
| QICAM 12-bit Mono Fast 1394 Cooled | |
| QImaging Testing Board | |
| Retiga 4000R Color | |
| Retiga 4000R Color Cooled | |
| Retiga 4000R Mono | |
| Retiga 4000R Mono Cooled | |
| Retiga 2000R Fast 1394 Color | |
| Retiga 2000R Fast 1394 Color Cooled | |
| Retiga 2000R Fast 1394 Mono | |
| Retiga 2000R Fast 1394 Mono Cooled | |
| Retiga 1300i Mono | |
| Retiga Exi Color | |
| Retiga Exi Color Cooled | |
| Retiga Exi Fast 1394 Color | |
| Retiga Exi Fast 1394 Color Cooled | |
| Retiga Exi Fast 1394 Mono | |
| Retiga Exi Fast 1394 Mono Cooled | |
| Retiga Exi Mono | |
| Retiga Exi Mono Cooled | |
| Retiga SRV | |
| Retiga 2000RV | |
| Retiga 4000RV | |
| Rolera XR | |
| Rolera MGi |
