Many instruments, data acquisition devices, cameras, and other hardware connect to a computer through a USB cable. MATLAB enables you to control and acquire data from these devices using:
Using MATLAB and Instrument Control Toolbox, you can work with any USB instrument that offers remote USB connectivity through VISA software, such as the following:
You communicate with these instruments by sending SCPI commands over the VISA-USB interface. Instrument Control Toolbox also provides connectivity through instrument drivers such as:
You can use these drivers directly from MATLAB to communicate with the instrument over the USB connection, provided that VISA software is installed.
Through Data Acquisition Toolbox, MATLAB supports many data acquisition devices that connect to the computer via a USB cable, enabling you to work with analog input, analog output, and digital I/O capabilities of these devices directly from MATLAB. See the complete list of supported hardware.
Through Image Acquisition Toolbox, MATLAB supports many imaging devices and webcams that connect to the computer via a USB cable, enabling you to work with these devices directly from MATLAB. See the complete list of supported hardware.Learn more about Test and Measurement