Instrument Control Toolbox™ 2.6

Supported Hardware - VISA

MATLAB and Simulink support the VISA standard (including interfaces for GPIB, VXI, GPIB-VXI, USB, TCP/IP, and Serial) through the Instrument Control Toolbox.

The table below lists the VISA drivers supported by Instrument Control Toolbox. A full list of driver limitations is available.

Provide Feedback
Please use the form below to tell us about the communication protocols that you are using, the type of application or test system you want to develop, or if there is information you would find helpful on this Web page.

Supported Hardware
Manufacturer	Minimum Driver Requirements
Agilent Technologies	Agilent I/O Libraries version M.01.01.04
National Instruments	NI-VISA version 3.0
Rohde & Schwarz	NI-VISA version 3.0
Tektronix	Tektronix VISA version 2.0

 

Request Additional Hardware Interface Support

*Indicates Required Information *Hardware Manufacturer Comments *E Mail (Format must be valid, e.g., name@yourdomain.com) We will not sell or rent your personal contact information. See our privacy policy for details.

 

Information on using Instrument Control Toolbox with instruments from Agilent, Anritsu, LeCroy, Rohde & Schwarz, Tektronix, and other manufacturers is available.