Store 
Instrument Control Toolbox™ 2.6
Supported Hardware - GPIB
MATLAB and Simulink support the GPIB protocol through the Instrument Control Toolbox.
MATLAB is an ideal software environment for communicating with instruments using GPIB, VISA, TCP/IP, or UDP. Instrument Control Toolbox enables MATLAB to control, configure, and transfer data with instrumentation. Once data is in MATLAB, you can analyze and visualize that data using interactive tools and command-line functions for data analysis tasks such as signal processing, statistical analysis, digital filtering, curve fitting, and nonlinear optimization. Data acquisition and analysis work can also be incorporated into GUI-based applications.
GPIB
MATLAB and Simulink support instrument communication via the GPIB (HPIB, IEEE-488) protocol when you use the Instrument Control Toolbox. You may want to download the MATLAB GPIB code example to get started using MATLAB for GPIB communication. A full list of driver limitations is available.
The table below lists the GPIB drivers supported by Instrument Control Toolbox. Information on using Instrument Control Toolbox with VISA is also available.
Provide Feedback
Please use the form below to tell us about the communication protocols that you are using, the type of application or test system you want to develop, or if there is information you would find helpful on this Web page.
| Supported Hardware | |
|---|---|
| Manufacturer | Minimum Driver Requirements |
 Agilent Technologies | SICL version H.012.02.00 |
| Capital Equipment Corporation (CEC) | CEC-488 version 5.08 |
| CONTEC | API-GPLV version 1.33 |
| ICS Electronics | ICS 488.2 version 2.0 |
| IOTech | IOTech version 1.0 |
| Keithley | Keithley-488 version 5.08 |
| Measurement Computing Corp. | GPIB-32 version 2.12 |
| National Instruments | NI-488 version 1.6 |
Information on using Instrument Control Toolbox with instruments from Agilent, Anritsu, LeCroy, Rohde & Schwarz, Tektronix, and other manufacturers is available.
