Mapping Toolbox 3.0

Creating Maps from Data in a Projected x-y System

This gallery illustrates the range of maps that you can create using mapshow.

Contents

Map 1: Concord Roads - A Geographic Data Structure

Display a geographic data structure array with lines representing roads. In the shapefile 'concord_roads.shp', the road coordinates have been pre-projected to the Massachusetts Mainland State Plane system (in meters), so the shapefile is imported into a mapstruct (the variable 'roads').

roads = shaperead('concord_roads.shp');
figure
mapshow(roads);
xlabel('easting in meters')
ylabel('northing in meters')

Map 2: Concord Roads with Custom LineStyle

Display the roads shape and change the LineStyle.

figure
mapshow('concord_roads.shp','LineStyle',':');
xlabel('easting in meters')
ylabel('northing in meters')

Map 3: Concord Roads with SymbolSpec

Display the roads shape, and render using a SymbolSpec.

To learn about the concord_roads.shp dataset, read its associated concord_roads.txt metadata file which describes the attributes.

type concord_roads.txt

  A shapefile data set for roads in part of Concord, Massachusetts,
  USA comprising the following files:

     concord_roads.dbf
     concord_roads.shp
     concord_roads.shx

  Source
  ------
  Office of Geographic and Environmental Information (MassGIS),
  Commonwealth of Massachusetts  Executive Office of Environmental Affairs
  (http://www.state.ma.us/mgis/)

  Coordinate system/projection
  ----------------------------
  All data distributed by MassGIS are registered to the NAD83 datum,
  Massachusetts State Plane Mainland Zone coordinate system. Units are in
  meters.

  Data set construction
  ---------------------
  This data set was constructed by concatenating Massachusetts Highway
  Department road shapefiles for the Maynard and Concord USGS Quadrangles,
  from compressed files mrd97.exe and mrd104.exe.

  Features were selected with bounding boxes intersecting the following
  box:
            [206500 (min easting)  910500 (min northing)
             211500 (max easting)  913500 (max northing)]

  The following attributes were retained:

      'STREETNAME', 'RT_NUMBER', 'CLASS', 'ADMIN_TYPE', 'LENGTH'

  Attributes 'CLASS' and 'ADMIN_TYPE' contain numerical codes defined by
  MassGIS as follows:

  Road classes (from file mrdac.dbf)
  ----------------------------------
  CLASS 1 Limited access highway
  CLASS 2 Multi-lane highway, not limited access
  CLASS 3 Other numbered route
  CLASS 4 Major road - collector
  CLASS 5 Minor street or road
  CLASS 6 Minor street or road
  CLASS 7 Highway ramp

  Road admin types (from file mrdac.dbf)
  --------------------------------------
  ADMIN_TYPE 0 Local road
  ADMIN_TYPE 1 Interstate
  ADMIN_TYPE 2 U.S. Federal
  ADMIN_TYPE 3 State

  Construction date
  -----------------
  November 17, 2003.

Query the attributes in this roads file.

roads = shaperead('concord_roads.shp')

roads =

609x1 struct array with fields:
    Geometry
    BoundingBox
    X
    Y
    STREETNAME
    RT_NUMBER
    CLASS
    ADMIN_TYPE
    LENGTH

Find out how many roads fall in each CLASS.

histc([roads.CLASS],1:7)

ans =

     0    14    93    26   395    81     0

Find out how many roads fall in each ADMIN_TYPE.

histc([roads.ADMIN_TYPE],0:3)

ans =

   502     0     0   107

Notice that there are no roads in this file that are CLASS 1 or 7, and the roads are either ADMIN_TYPE 0 or 3.

Create a SymbolSpec to:

roadspec = makesymbolspec('Line',...
                          {'ADMIN_TYPE',0, 'Color','black'}, ...
                          {'ADMIN_TYPE',3, 'Color','red'},...
                          {'CLASS',6, 'Visible','off'},...
                          {'CLASS',[1 4], 'LineWidth',2});
figure
mapshow('concord_roads.shp','SymbolSpec',roadspec);
xlabel('easting in meters')
ylabel('northing in meters')

Map 4: Concord Roads, Override SymbolSpec

Override a graphics property of the SymbolSpec.

roadspec = makesymbolspec('Line',...
                          {'ADMIN_TYPE',0, 'Color','black'}, ...
                          {'ADMIN_TYPE',3, 'Color','red'},...
                          {'CLASS',6, 'Visible','off'},...
                          {'CLASS',[1 4], 'LineWidth',2});
figure
mapshow('concord_roads.shp','SymbolSpec',roadspec,'Color','black');
xlabel('easting in meters')
ylabel('northing in meters')

Map 5: Boston Roads with SymbolSpec, Override Defaults

Override default property of the SymbolSpec.

roadspec = makesymbolspec('Line',...
                          {'Default', 'Color','green'}, ...
                          {'ADMIN_TYPE',0, 'Color','black'}, ...
                          {'ADMIN_TYPE',3, 'Color','red'},...
                          {'CLASS',6, 'Visible','off'},...
                          {'CLASS',[1 4], 'LineWidth',2});
figure
mapshow('boston_roads.shp','SymbolSpec',roadspec);
xlabel('easting in meters')
ylabel('northing in meters')

Map 6: GeoTIFF Image of Boston

Display the Boston GeoTIFF image; includes material (c) GeoEye™, all rights reserved.

figure
mapshow boston.tif
axis image off

Read Boston placenames in order to overlay on top of the GeoTIFF image.

S = shaperead('boston_placenames.shp');

The projection in the GeoTIFF file is in units of survey feet. The point coordinates in the shapefile are in meters. Therefore, we need to convert the placename coordinates from meters to survey feet in order to overlay the points on the image.

surveyFeetPerMeter = unitsratio('sf', 'meter');
for k = 1:numel(S)
    S(k).X = surveyFeetPerMeter * S(k).X;
    S(k).Y = surveyFeetPerMeter * S(k).Y;
end

Display the placenames.

text([S.X], [S.Y], {S.NAME}, ...
    'Color',[0 0 0],'BackgroundColor',[0.9 0.9 0]);

Zoom in on a selected region.

set(gcf,'Pos', [5, 50, 1900, 1000]);
set(gca,'XLim',[ 772007,  775582], ...
        'YLim',[2954572, 2956535]);

Map 7: Pond with Islands over Orthophoto Backdrop

Display a pond with three large islands (feature 14 in the concord_hydro_area shapefile). Note that islands are visible in the orthophoto through three "holes" in the pond polygon. Display roads in the same figure.

[ortho, cmap] = imread('concord_ortho_w.tif');
R = worldfileread('concord_ortho_w.tfw');
figure
mapshow(ortho, cmap, R)

Save map limits used for image

xLimits = get(gca,'XLim');
yLimits = get(gca,'YLim');
pond = shaperead('concord_hydro_area.shp', 'RecordNumbers', 14);
hold on
mapshow(pond, 'FaceColor', [0.3 0.5 1], 'EdgeColor', 'black')
mapshow('concord_roads.shp', 'Color', 'red', 'LineWidth', 1);
xlabel('easting in meters')
ylabel('northing in meters')

Restore map limits to match image

set(gca,'XLim',xLimits,'YLim',yLimits)

Map 8: Mount Washingtion SDTS Digital Elevation Model

View the Mount Washington terrain data as a mesh. The data grid is georeferenced to Universal Transverse Mercator (UTM) zone 19.

figure
h = mapshow('9129CATD.ddf','DisplayType','mesh');
Z = get(h,'ZData');
colormap(demcmap(Z))
xlabel('UTM easting in meters')
ylabel('UTM northing in meters')

View the Mount Washington terrain data as a 3-D surface. Use the default 3-D view, which shows how the range looks from the southwest.

figure
mapshow('9129CATD.ddf');
colormap(demcmap(Z))
view(3);
axis equal;
xlabel('UTM easting in meters')
ylabel('UTM northing in meters')
zlabel('Elevation in feet')

Map 9: Mount Washington and Mount Dartmouth on One Map with Contours

Display the grid and contour lines of Mount Washington and Mount Dartmouth.

Read the terrain data files.

[Z_W, R_W] = arcgridread('MtWashington-ft.grd');
[Z_D, R_D] = arcgridread('MountDartmouth-ft.grd');

Display the terrain data as a texture map to allow overlay of the contour vectors.

figure
hold on
hW = mapshow(Z_W, R_W, 'DisplayType', 'texturemap');
hD = mapshow(Z_D, R_D, 'DisplayType', 'texturemap');
set([hW, hD], 'FaceColor', 'flat');
colormap(demcmap(Z_W))
xlabel('UTM easting in meters')
ylabel('UTM northing in meters')

Overlay black contour lines with labels onto the texturemap surface.

mapshow(Z_W, R_W, 'DisplayType', 'contour', ...
   'LineColor', 'black', 'ShowText', 'on');
mapshow(Z_D, R_D, 'DisplayType', 'contour', ...
   'LineColor', 'black', 'ShowText', 'on');
axis equal

Credits

boston_roads.shp, concord_roads.shp, concord_hydro_line.shp, concord_hydro_area.shp, concord_ortho_e.tif:

  Office of Geographic and Environmental Information (MassGIS),
  Commonwealth of Massachusetts Executive Office of Environmental Affairs
  http://www.state.ma.us/mgis

boston.tif

  Copyright GeoEye
  Includes material copyrighted by GeoEye, all rights reserved. For more
  information, please call 1.703.480.7539 or visit http://www.geoeye.com

  For more information, run:

  >> type boston.txt

9129CATD.ddf (and supporting files):

  United States Geological Survey (USGS) 7.5-minute Digital Elevation
  Model (DEM) in Spatial Data Transfer Standard (SDTS) format for the
  Mt. Washington quadrangle, with elevation in meters.
  http://edc.usgs.gov/products/elevation/dem.html

  For more information, run:

  >> type 9129.txt

MtWashington-ft.grd, MountDartmouth-ft.grd:

  MtWashington-ft.grd is the same DEM as 9129CATD.ddf, but converted to
  Arc ASCII Grid format with elevation in feet.

  MountDartmouth-ft.grd is an adjacent DEM, also converted to Arc ASCII
  Grid with elevation in feet.

  For more information, run:

  >> type MtWashington-ft.txt
  >> type MountDartmouth-ft.txt