Simscape 

Working in Restricted Mode in Simscape

To use models containing blocks from Simscape add-on products (SimDriveline, SimElectronics, SimHydraulics, SimMechanics, and SimPowerSystems) in Restricted mode, you must have these products installed on your machine.

Before installing the Simscape add-on products, make sure that MATLAB, Simulink, and Simscape are installed and activated on your machine and that you have access to the MATLAB installation DVD.

To install the Simscape add-on products:

  1. Insert the MATLAB installation DVD into your computer.
  2. On the Installer Welcome screen, choose the option to install manually, and click Next.

  3. Read and accept the terms of the MathWorks license agreement, and click Next.
  4. Enter the File Installation Key (FIK), and select Next.
    • For R2014a, enter 54200-43653-20276-14827
    • For R2013b, enter 54464-43756-13013-24394
    • For R2013a, enter 07351-24066-27338-63644
    • For R2012b, enter 23809-26556-08469-31324
    • For R2012a, enter 25716-63335-16746-06072
    • For R2011b, enter 55378-15621-26167-61826
    • For R2011a, enter 27426-31172-01132-01549
    • For R2010b, enter 01480-23669-47171-24549
    • For R2010a, enter 47581-10043-50171-03443
    • For R2009b, enter 35483-12239-22082-28234
    • For R2009a, enter 50589-47126-12472-25926
    • For R2008b, enter 01465-31563-15305-58127
    • For R2008a, enter 59364-09644-42779-14086
  5. Choose typical for the installation type, and click Next.

  6. Browse to the folder where your MathWorks products are installed, and click Next.
  7. Confirm your installation settings, and click Install.

  8. When installation is complete, clear the Activate MATLAB checkbox and click Finish.

You should now be able to use models containing Simscape add-on products in Restricted mode.