Target Support Package™ TC2 (for TI’s C2000™ DSP) 3.0

Latest Features

Version 3.0

Released: 01 Mar 2008
 

Version 3.0, part of Release 2008a, includes the following enhancements:

• New support and demos for the 2833x DSP chip
• New support for C280x Inter-Integrated Circuit (I2C) Transmit and Receive
• Expanded control of on-chip peripherals using Qualification Type and Sampling Period
• Expanded control of Pulse Width Modulation (PWM) using interrupts
• New watchdog timer support for the C280x, C281x, and C2833x DSPs

See the Release Notes for details.

Update Now

• Download the latest version if your software maintenance service is current.
• Purchase or request a renewal quote if your maintenance service has lapsed.
• Try the latest version by downloading or requesting trial software.

---

Version 2.3

Released: 01 Sep 2007
 

Version 2.3, part of Release 2007b, includes the following enhancements:

• Support for CCP and ASAP2 protocols
• New external mode capability using newly added support for CCP and ASAP2 protocols
• New high-resolution PWM on c280x Targets
• Interrupt handling for 280x eQEP
• New workflow demo showcasing all major features of Target for TI C2000

See the Release Notes for details.

Version 2.2

Released: 01 Mar 2007
 

Version 2.2, part of Release 2007a, includes the following enhancements:

• General-purpose I/O (GPIO) blocks added to configure GPIO registers for C280x targets
• Software Interrupt block for interrupt-driven scheduling in models
• C280x CAP blocks for all C280x processor targets

See the Release Notes for details.

Version 2.1

Released: 01 Sep 2006
 
Version 2.1, part of Release 2006b, includes the following enhancements:

• New host-side SCI blocks for communication with running target processor and for real-time synchronization and verification
• New and enhanced target block support for
  • C280x SCI and SPI device driver blocks
  • C281x SCI custom data configuration and SPI enhanced blocking mode and output error status support
  • SCI and SPI module configuration for Target Preferences blocks
• Support for TMS320C2802 and TMS320C2809 digital signal controllers
• New demos for Spectrum Digital F2812, F2808 eZdsp™ or F2806 custom boards:
  • Hardware-in-the-loop (HIL) demo using SCI
  • Permanent Magnet Synchronous Motor Field Orientation Control (PMSM FOC) demos for simulation and implementation, including asynchronous scheduling and flash memory download

See the Release Notes for details.

Version 2.0

Released: 01 Mar 2006
 
Version 2.0, part of Release 2006a, includes the following enhancements:

• Asynchronous interrupt scheduling support for C280x and C281x
• New C280x Chip Support Library including the following blocks:C280x Hardware Interrupt, Idle Task, C280x ADC, C280x ePWM, C280x eQEP, C280x eCAN Receive, C280x eCAN Transmit, and From Memory
• Expanded support for C2000 targets, including Spectrum Digital F2808 eZdspDSP board and custom boards based on the C280x and C281x processor families
• Flash memory programming support

See the Release Notes for details.

Version 1.3

Released: 01 Sep 2005
 

Version 1.3, part of Release 14 with Service Pack 3, includes the following enhancements:

• New free-running scheduler with no interrupts
• Internal memory map support for C2407
• New SCI blocks and SPI blocks for C24x and C28x
• New Ramp Control block, Ramp Generator block
• Enhanced ADC, PWM, and CAN blocks

See the Release Notes for details.

Version 1.2.1

Released: 07 Mar 2005
 

• New C24x and C28x CAP capture unit blocks

Version 1.2.1, part of MathWorks Release with Service Pack 2, also includes bug fixes. See the Release Notes for details.

Version 1.2

Released: 09 Dec 2004
 

• RTDX read/write blocks for C28x platform
• New peripheral blocks: Vector CAN blocks for C24x and C28x platforms
• New demos: DC Motor Speed Control, RTDX

Version 1.1.1

Released: 22 Sep 2004
 

Version 1.1.1 includes bug fixes.

Version 1.1

Released: 02 Jun 2004
 

The Embedded Target for TI C2000™ DSP Platform integrates Simulink and MATLAB with Texas Instruments eXpressDSP™ tools and C2000 DSP processors. Together, these products let you perform automatic code generation, prototyping, and embedded system deployment on TI C2000 processors.

• Generates documented, readable, and editable C code in Code Composer Studio™ project format
• Automates the testing and execution of Simulink models on TI C2000 DSPs
• Enables the real-time evaluation of system designs on F2812 eZdsp and F2407 eZdsp boards
• Provides block-level access to onchip peripherals, such as PWM, ADC, CAN, and target memory
• Provides block-level access to TI'sIQmath library for simulation and code generation