Vehicle Network Toolbox 1.4

Supported Hardware – National Instruments

Vehicle Network Toolbox supports National Instruments CAN interface hardware using the latest version of the NI-CAN driver library. The table below lists the hardware supported by the latest release of Vehicle Network Toolbox. If you have an older version of the toolbox, refer to the Minimum Release Required column in the table to see if a device is supported by that version. You may need to update to the latest version of the toolbox to use a particular device.

Note: You must use the 32-bit version of Vehicle Network Toolbox and MATLAB to use National Instruments CAN hardware.

If you do not see your specific hardware device listed below, complete the form at the bottom of the page.

• PCI
• PCMCIA
• PXI
• USB

Supported Hardware
Bus/Form Factor	Product Name	NI Driver Type	Minimum Release Required
PCI	PCI-CAN/XS Series 2	NI-CAN	R2011a (version 1.4)
	PCI-CAN/XS2 Series 2	NI-CAN	R2011a (version 1.4)
	PCI-CAN/LS Series 2	NI-CAN	R2011a (version 1.4)
	PCI-CAN/LS2 Series 2	NI-CAN	R2011a (version 1.4)
	PCI-CAN Series 2	NI-CAN	R2011a (version 1.4)
	PCI-CAN/2 Series 2	NI-CAN	R2011a (version 1.4)
PCMCIA	PCMCIA-CAN/DS Series 2	NI-CAN	R2011a (version 1.4)
	PCMCIA-CAN/LS Series 2	NI-CAN	R2011a (version 1.4)
	PCMCIA-CAN/LS2 Series 2	NI-CAN	R2011a (version 1.4)
	PCMCIA-CAN Series 2	NI-CAN	R2011a (version 1.4)
	PCMCIA-CAN/2 Series 2	NI-CAN	R2011a (version 1.4)
PXI	PXI-8460 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8460/2 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8461 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8461/2 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8463 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8463/2 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8464 Series 2	NI-CAN	R2011a (version 1.4)
	PXI-8464/2 Series 2	NI-CAN	R2011a (version 1.4)
USB	USB-8472	NI-CAN	R2011a (version 1.4)
	USB-8472s	NI-CAN	R2011a (version 1.4)
	USB-8473	NI-CAN	R2011a (version 1.4)
	USB-8473s	NI-CAN	R2011a (version 1.4)