xPC Target Support

Documentation Examples
View Documentation Examples

Technical Support Examples
Does MATLAB or Simulink have any capabilities of interfacing to Vector Cantech product such as CANoe, CANape?
Why do I receive a TCP/IP timeout error while receiving data using xPC Target 3.3 (R2007b)?
Where can I download the Open Watcom C compiler version 1.3 for xPC Target?
How do I connect my host computer directly to the target using the TCP/IP option in xPC Target?
Why is the modelname_xpc_emb folder not created when I build my model for xPC Target in MATLAB 7.6 (R2008a)?
Why is a Pentium 4 machine slower in speed than Pentium 3 machine when used as the designated target with xPC target?
Is it possible to have a wireless host/target TCP/IP connection using xPC Target 2.0.1 (R13SP1)?
Why does the GET function no longer retreive the signal values from the target object on xPC Target 2.5 (R14)?
Why is my compact flash drive not accessible from xPC Target?
Why do I receive errors when trying to build my model which has a CAN PCI I/O board using xPC Target 1.1 (R12)?
Why do I get the "11 130 0 ENOTSOCK" error while trying to boot my xPC Target using the hard drive or the USB drive in xPC Target?
Is there a method I can use to change my values in my xPC Target model even if the P# or S# changes?
How do I set up the xPC TargetBox so that at boot time, I can select between booting to the DOS command prompt or the xPC Target Kernel?
Why do I receive "runtime error M60202" when running my xPC Target 3.1 (R2006b) application on my target?
Why am I having trouble accessing the parameters of an S-function from the xPC Target COM API 2.0 (R13.0.1)?
How can I view the spectrum of a signal in real-time using xPC Target 2.5 (R14)?
Why does the boot process hang the target PC when booting the standard xPC kernels?
How can I synchronize two xPC Target machines in xPC Target 2.0.1 (R13SP1)?
Why does the second run of my xPC Target simulation return wrong tg.outputlog values?
Why do I receive "Address 100000h not available" error while booting my Target PC using xPC Target 3.2 (R2007a) with Embedded Option?
Why do I receive an "out of memory" error when building a very large model for xPC Target?
Is it a problem if multiple boards have the same IRQ assignment in xPC Target 2.0.1 (R13SP1)?
Why am I not able to connect to my target machine using TCP/IP with xPC Target 3.1 (R2006b)?
Is the DT9836 from Data Translation supported by xPC target 2.9 (R2006a) ?
Why am I unable to establish a connection between my host and target machines while using an external Ethernet card in xPC Target 3.3 (R2007b)?
How can I determine the base address for my Sensoray 526 board in xPC Target?
Why does the CIO-QUAD04 or PCI-QUAD04 Incremental Encoder block miss counts with xPC Target 2.0.1 (R13SP1)?
Is it possible to resume the link to the xPC Target after accidentally shutting down MATLAB?
How can I use a single General Standards PCI-ADADIO card with an external trigger in Burst Scan mode with xPC Target 3.2 (R2007a)?
Is the Intel Pro/1000 MT Ethernet card supported in xPC Target 3.4 (R2008a)?
Why do I have difficulties with host-target communication in a newer release of xPC Target, but not in an older one?
Why do I see high task execution times in the beginning of execution of my model in xPC Target?
Why does the XPCSLIFACE function take a long time to generate my instrumentation model in xPC Target 2.7(R14)?
Is the NI PCI-6040E board supported by xPC Target?
Why do I have difficulties transmitting data through a serial connection from one xPC Target machine to another with xPC Target 3.2 (R2007a)?
How do I access sensor data on my PC/104 board using xPC Target?
Why am I unable to connect two Simulink models in external mode running on a single host to two different xPC target machines?
Why do I receive the error about the input port width when using FIFO write block in xPC Target 2.7.3 (R14SP3)?
Why is the measured latency of the A/D block from the xPC Target 2.7.2 (R14SP2) library in my model greater than the sample time?
Why does my target PC (Celeron 750 MHz) have a low performance?
Why do I get an error when trying to start CANape?
Why am I unable to ping the xPC Target system using MATLAB 7.4 (R2007a) boot disk but I am able to ping it with an older version of xPC Target?
Why am I unable to connect to xPC Target using a serial connection?
Are there any known problems with Microsoft Visual C 7.0 or 7.1 and xPC Target 2.0.1 (R13SP1)?
Why does the CAN Message Unpacking block not accept double as an input datatype in XPC Target 3.2 (R2007a)?
Does xPC Target 3.1(R2006b) support serial ports for the MPL PATI boards?
How can I make my A/D and D/A UEI (United Electronic Industries) boards run at their data-sheet speed with xPC Target?
Why do I get a setup error when trying to build an xPC model?
Why do I receive an error when attempting to generate a COM object DLL with xPC Target 2.0 (R13), when using a model with custom C-MEX S-Functions?
How can I check if the TCP/IP connection between the host and the target is active using the COM API in xPC Target 3.4 (R2008a)?
Why did I receive an error when I tried to use xPC Target 2.0 (R13.0.1) to build a model that had been translated using the SB2SL command?
Why do I receive "CPUoverload" in xPC Target when I combine two models with the "Conditional input branch execution" option selected, when individually they run without a problem?
Is it possible to have just one host machine for two or more xPC Target machines in xPC Target 3.4 (R008a)?
How do I reconnect to a target machine using xPC Target 3.2 (R2007a)?
Why do I get overflow errors with serial communication between Quatech ESC-100F and xPC Target 3.4(R2008a)?
How does the memory available on xPC Target affect the speed of the application in xPC Target 3.4(R2008a)?
How do I obtain the system clock time (wall clock time) while working with xPC Target 4.0 (R2008b)?
Is it possible to analyze exactly how long a process takes to execute so that 'CPU Overload' can be avoided in xPC Target 4.0 (R2008b)?
Why am I unable to use the QSC100 board with xPC Target 3.4 (R2008a)?
Are the PCI-6120, PCI-6251, and PCI-6259 NI boards supported by xPC Target?
Why do I receive a TCP/IP timeout error while receiving data using xPC Target 4.0( R2008b) and a SCRAMNET board?
Why do I get the error "Cannot open include file: 'math.h'" when trying to compile a model using MSVC 2005 and Simulink 7.3 (R2009a)?
Why does my xPC Target Scope not display the output of a Constant block in xPC Target 4.0 (R2008b)?
Why do I receive a 'FIFO overflow' error message after my model stops executing with xPC Target 4.1 (R2009a)?
How can I use negative transition of CTR05 interrupt source to start the simulation in xPC Target 4.1 (R2009a)?
How do I use custom drivers for Vicon motion capture system along with xPC target 3.4 (R2008a)?
Why am I getting CPU Overload errors in xPC Target even though my sample time is much larger than the TET's?
How can I share data between my target machine and my host machine in real-time while the target is running in xPC Target 4.1 (R2009a)?
Why does XPCTEST 5 fail in MATLAB 7.6 (R2008a)?
Why do I receive a TCP/IP timeout error while transmitting data with a PCI-6221 analog output block using xPC Target 4.1 (R2009a)?
Why does the execution time show a jerky behavior when the model is run using XPCEXPLR in xPC Target 4.0 (R2008b)?
Is it possible to use a RTL8111C network card in xPC Target 4.0 (R2008b)?
Can I use a target PC with an encrypted hard disk in xPC Target 3.3 (R2007b)?
How can I use a GUI created with GUIDE to view the numerical data values received from target using connected to host computer via xPC Target 4.0 (R2008b)?
Why do I get a Linker error when using 'xpce*' functions in my own xPC-UDP-block with xPC Target 4.1 (R2009a)?
Why do I get an 'Attempt to Read/Write protected memory' error when I try to read data from a host scope using the xPCScopes.ScopeGetData through a COM API in xPC Target 3.3(R2007b)?
Can I change settings in the xPC driver for the NI-PCI-6704 to modify the update time?
Why do I get a CPU overload error when executing my PCI 6052E card even at a low sampling rate of 25 Hz in xPC Target 2.9 (R2006a)?
What are the differences between Real-Time Windows Target and xPC Target?
How are CPU Overloads managed in xPC Target 4.2 (R2009b)?
How can I read in a very large DAT file from xPC Target when I keep running out of memory using READXPCFILE in xPC Target 4.2 (R2009b)?
Is it possible to change the frequency of the PWM signal output that is generated from the DM6816 PWM block in xPC Target 4.2 (R2009b)?
Why do I see timing differences in arrival of UDP packges sent from xPC Target?
How can I use data from a MUX block with the from xPC block in xPC Target 4.2 (R2009b)?
Why do I receive an error while trying to initialize the target board in xPC Target 4.1 (R2009a)?
How do I access a BAR1 register when developing a driver for xPC Target?
Why do I receive the error "system execution can not be started" while using xPC Target?

Get Help with Another Product Select a product MATLAB Simulink MATLAB & Simulink Student Version Aerospace Blockset Aerospace Toolbox Bioinformatics Toolbox Communications Blockset Communications Toolbox Control System Toolbox Curve Fitting Toolbox Data Acquisition Toolbox Database Toolbox Datafeed Toolbox DO Qualification Kit Econometrics Toolbox EDA Simulator Link Embedded IDE Link Filter Design HDL Coder Filter Design Toolbox Financial Derivatives Toolbox Financial Toolbox Fixed-Income Toolbox Fixed-Point Toolbox Fuzzy Logic Toolbox Gauges Blockset Genetic Algorithm and Direct Search Toolbox IEC Certification Kit Image Acquisition Toolbox Image Processing Toolbox Instrument Control Toolbox Mapping Toolbox MATLAB Builder EX MATLAB Builder JA MATLAB Builder NE MATLAB Compiler MATLAB Distributed Computing Server MATLAB Report Generator Model Predictive Control Toolbox Model-Based Calibration Toolbox Neural Network Toolbox OPC Toolbox Optimization Toolbox Parallel Computing Toolbox Partial Differential Equation Toolbox PolySpace Client for Ada PolySpace Client for C/C++ PolySpace Model Link SL PolySpace Model Link TL PolySpace Server for Ada PolySpace Server for C/C++ PolySpace UML Link RH Real-Time Windows Target Real-Time Workshop Real-Time Workshop Embedded Coder RF Blockset RF Toolbox Robust Control Toolbox Signal Processing Blockset Signal Processing Toolbox SimBiology SimDriveline SimElectronics SimEvents SimHydraulics SimMechanics SimPowerSystems Simscape Simulink 3D Animation Simulink Control Design Simulink Design Optimization Simulink Design Verifier Simulink Fixed Point Simulink HDL Coder Simulink Report Generator Simulink Verification and Validation Spline Toolbox Spreadsheet Link EX Stateflow Stateflow Coder Statistics Toolbox Symbolic Math Toolbox System Identification Toolbox SystemTest Target Support Package Vehicle Network Toolbox Video and Image Processing Blockset Wavelet Toolbox xPC Target xPC Target Embedded Option