| Solution ID |
Summary |
|
|
1-1TET44
|
Is it possible to create a standalone GUI using the MATLAB Compiler 4.3 (R14SP3) that interacts with xPC Target 2.8 (R14SP3) using the M-API? |
|
1-35X66Y
|
Does MATLAB or Simulink have any capabilities of interfacing to Vector Cantech product such as CANoe, CANape? |
|
1-4YJCXT
|
Why do I receive a TCP/IP timeout error while receiving data using xPC Target 3.3 (R2007b)? |
|
1-28T41D
|
How can I interface to PLCs like the Modicon or Allen Bradley PLC with MATLAB or Simulink? |
|
1-19PSS
|
Why am I receiving a "CPU Overload" error while executing my application on xPC Target? |
|
1-13B6EL
|
Why do I receive an error when using XPCEXPLR in xPC Target 2.7.2 (R14SP2)? |
|
1-19FL6
|
Where can I find information for creating my own I/O device driver for use with xPC Target? |
|
1-4B11HJ
|
Where can I download the Open Watcom C compiler version 1.3 for xPC Target? |
|
1-1C7AY
|
Why is there an error displayed on my target machine after I boot the machine using the boot disk created by my host machine using xPC Target 2.5 (R14)? |
|
1-18QFF
|
How can I develop a GUI that allows me to interact with my xPC Target application from the host machine? |
|
1-111YP1
|
Why do I receive an error when building a model for the xPC Target which uses blocks from the Signal Processing Blockset 3.0.1 (R14SP1) with the Watcom 11.0 compiler? |
|
1-QNQQ5
|
How do I increase the baud rate of the standard RS-232 drivers from xPC Target? |
|
1-12NC5D
|
Why does my motor race when booting the target computer to which it is connected using xPC Target? |
|
1-1HO6XG
|
Why do I receive a "non-structure array" error when using XPCEXPLR in xPC Target 2.7.2 (R14SP2) on Windows? |
|
1-1C4RD
|
How do I connect my host computer directly to the target using the TCP/IP option in xPC Target? |
|
1-28THMD
|
Is there a simple example that demonstrates serial port I/O with xPC Target? |
|
1-20NE1M
|
Why do I receive an "nmake" error when compiling a model which uses C++ S-functions in xPC Target 2.8 (R14SP3)? |
|
1-17V2P
|
What hardware devices does xPC Target support? |
|
1-ZAWAH
|
Why does setting the numerical formats and labels using the xPC Target Scope block have no effect in xPC Target 2.7.1 (R14SP1+)? |
|
1-2H1U68
|
Why do I receive a fatal NMake error when building a model containing xPC Target blocks for the GRT Target using Real-Time Workshop 6.0 (R14)? |
|
1-1CCXXP
|
Why does my xPC Target application crash when using an xPC Target Scope block in which 'Scope mode' is set to 'Numerical'? |
|
1-2HB4PK
|
What is the definition of Task Execution Time (TET) and what does it measure in xPC Target? |
|
1-18KWG
|
Does xPC Target support RS-485 or RS-422 serial ports? |
|
1-6JJQIX
|
Why is the modelname_xpc_emb folder not created when I build my model for xPC Target in MATLAB 7.6 (R2008a)? |
|
1-1ALSE
|
Why is the TCP/IP communication protocol not working for my xPC Target 2.0 (R13) model? |
|
1-1J7RAI
|
How can I look at the data in a file created by the File Scope block on the host machine in xPC Target 2.7.2 (R14SP2)? |
|
1-SKYQS
|
Can I save the files generated from my target machine onto a flash drive using xPC Target 2.6.1 (R14SP1)? |
|
1-196WO
|
Why is a Pentium 4 machine slower in speed than Pentium 3 machine when used as the designated target with xPC target? |
|
1-2K69EB
|
Why do I get an invalid MSVC environment variable build error with xPC Target 2.9 (R2006a), even though my options file is set correctly? |
|
1-1B71P
|
What IP address should I use with xPC Target to connect the host and target computers using a TCP/IP crossover cable? |
|
1-10VKUX
|
Can the target PC's hard drive contain multiple partitions when accessing it using an xPC Target Scope of type 'File' in xPC Target 2.5 (R14)? |
|
1-YCW2B
|
How do I add an interrupt hook function in xPC Target 2.6.1 (R14SP1)? |
|
1-1BNXX
|
Is it possible to have a wireless host/target TCP/IP connection using xPC Target 2.0.1 (R13SP1)? |
|
1-PLBBT
|
Why am I unable to connect to my target in external mode using xPC Target 2.0.2 (R13SP1+) when I can connect using xPC Target 2.5 (R14)? |
|
1-OXYL6
|
Why does the GET function no longer retreive the signal values from the target object on xPC Target 2.5 (R14)? |
|
1-SCJZX
|
Why can I only use one channel of the Sensoray626 AD block in MATLAB 7.0.1 (R14SP1)? |
|
1-1AFGP
|
Why is my sample time on xPC Target not as close to my settings as possible? |
|
1-1190BJ
|
Does xPC Target 2.5 (R14) and later support the Watcom C/C++ Version 10.6 compiler? |
|
1-1CBDJ
|
Why do I receive an error when I attempt to use multiple PCI-CTR05 boards with xPC Target? |
|
1-6FB3ZN
|
Why is my compact flash drive not accessible from xPC Target? |
|
1-10O2SC
|
Does xPC Target support the NI PCI-6224 board? |
|
1-18KNV
|
Why do I receive errors when trying to build my model which has a CAN PCI I/O board using xPC Target 1.1 (R12)? |
|
1-6FJ2A9
|
Why do I get the "11 130 0 ENOTSOCK" error while trying to boot my xPC Target using the hard drive or the USB drive in xPC Target? |
|
1-2GV0EQ
|
Why does xPC Target 2.9 (R2006a_prerelease) using Open Watcom 1.3 fail to build models containing CAN drivers? |
|
1-1CARN
|
Is there a limit to the file size that can be created using the xPC Target File Scope in xPC Target 2.5 (R14) or later? |
|
1-1CBH8
|
How can I get a complete record of a signal from my xPC Target using xPC Target 2.0.1 (R13SP1)? |
|
1-1JE8S2
|
Is the two packet limit on UDP communication using xPC Target 2.7.2 (R14SP2) for one UDP block or for one UDP port? |
|
1-1BMB4
|
Is there a method I can use to change my values in my xPC Target model even if the P# or S# changes? |
|
1-1O8DUY
|
Why do I receive a "handle.listener" error when loading a MAT-file in MATLAB 7.0.1 (R14SP1)? |
|
1-1JWN6U
|
Can I access the target's file system when using a Serial ATA (SATA) drive with xPC Target 2.7.2 (R14SP2)? |
|
1-20LT3N
|
How do I set up the xPC TargetBox so that at boot time, I can select between booting to the DOS command prompt or the xPC Target Kernel? |
|
1-3UMNNH
|
Why do I receive "runtime error M60202" when running my xPC Target 3.1 (R2006b) application on my target? |
|
1-SSKG2
|
Why do I receive an error using the xPC Target function XPCBOOTDISK when my current directory contains spaces? |
|
1-1B980
|
Why am I having trouble accessing the parameters of an S-function from the xPC Target COM API 2.0 (R13.0.1)? |
|
1-18IKG
|
Why am I unable to close the "xPC Target:Target Manager" window if I have the "xpctargetspy" window open? |
|
1-P1LWV
|
Why do the processors listed in the relative performance bar chart not match the minimal achievable sample time table on the xPC Target product news web page? |
|
1-1X9PCQ
|
How can I view the spectrum of a signal in real-time using xPC Target 2.5 (R14)? |
|
1-17N4D
|
Why does the boot process hang the target PC when booting the standard xPC kernels? |
|
1-147TL9
|
Why does xPC Target not recognize my Measurement Computing PCI-PDISO8 board? |
|
1-TI9T1
|
Is there a conflict between xPC Target and the Windows XP Service Pack 2 firewall? |
|
1-1JE8QX
|
How do I handle register rollover for xPC Target encoder blocks? |
|
1-15C2BQ
|
How do I set the duty cycle of the PWM channel for the DM6816 PWM block in xPC Target 2.7.2 (R14SP2)? |
|
1-18CTE
|
Why are there spikes in the xPC Target TET log? |
|
1-1BR95
|
How can I synchronize two xPC Target machines in xPC Target 2.0.1 (R13SP1)? |
|
1-19F1K
|
How do I use the I/O blocks in xPC Target Library for data acquisition when using xPC Target 1.2 (R12.1)? |
|
1-13O7YT
|
How do I receive multiple inputs from the RS232 Asynchronous Receive block in xPC Target 2.7.1 (R14SP1)? |
|
1-VW1FT
|
Why does XPCTEST in xPC Target fail during Test 4? |
|
1-UUIWX
|
Why do I get a "Control Creation Failed" error after launching the xPC Target Explorer in xPC Target 2.6.1 (R14SP1)? |
|
1-17YLD
|
What sort of sample time support can I expect from the Real-Time Windows Target or the xPC Target? |
|
1-18DTB
|
Why does the second run of my xPC Target simulation return wrong tg.outputlog values? |
|
1-2YJSEF
|
Why do I receive an "out of memory" error when building a very large model for xPC Target? |
|
1-1YCWEY
|
How do I read the system clock using a C-MEX S-Function on the target PC using xPC Target? |
|
1-68WTC5
|
Why do I receive "Address 100000h not available" error while booting my Target PC using xPC Target 3.2 (R2007a) with Embedded Option? |
|
1-13302W
|
Why do I receive an “Error accessing DPRAM” message when downloading my CAN-AC2-104 firmware onto the board in xPC Target? |
|
1-13XGJH
|
Why does DOSLOADER fail in 16 MB kernels in xPC Target 2.6.1(R14SP1)? |
|
1-19ERF
|
Why do I encounter failures on Test 5 of the XPCTEST function in xPC Target? |
|
1-1ABUG
|
Why am I unable to run XPCTEST successfully when using the Microsoft Visual Studio C/C++ version 7.0 Compiler with a Pentium 4 as the target PC? |
|
1-QNRKX
|
Why do I get bad values when using the PCI-QUAD04 incremental encoder board with xPC Target 2.5 (R14)? |
|
1-1BLIQ
|
Is it a problem if multiple boards have the same IRQ assignment in xPC Target 2.0.1 (R13SP1)? |
|
1-PU9QL
|
Does xPC Target support force-feedback joystick as input? |
|
1-21BNSJ
|
Why do I receive an "index out of bounds" error when trying to add a new target in the xPC Target Explorer in xPC Target 2.7.2 (R14SP2)? |
|
1-H3RUJ
|
Why do I receive an error when using the xPC Target Explorer? |
|
1-14ZYMS
|
Why do I receive a " get_param" error message when I connect to my target in external mode with xPC Target 2.7.1 (R14SP1+)? |
|
1-16E361
|
Why does my model not run on the target machine when I am using a Scramnet board to generate the interrupts in xPC Target 2.5 (R14)? |
|
1-43A7EB
|
Why am I not able to connect to my target machine using TCP/IP with xPC Target 3.1 (R2006b)? |
|
1-13BOQF
|
Why does the FIFO bin read block in xPC Target 2.7.2 (R14SP2) not create an additional input port when I select the enable input option? |
|
1-1BYNJ
|
Can I work with two or more targets with xPC Target 2.0.2 (R13SP1+)? |
|
1-ZWRO5
|
Am I required to set up the host-target connection using TCP/IP in order to enable the UDP I/O blocks in xPC Target 2.5 (R14)? |
|
1-SSDUJ
|
Why do I get an error when building my model containing a Merge block with xPC Target 2.6 (R14)? |
|
1-1BS92
|
Why do the "To xPC Target" and "From xPC Target" blocks in xPC Target 2.0.2 (R13SP1+) have the wrong number of arguments? |
|
1-1NFO3T
|
Why does my A/D board experience crosstalk between channels when using xPC Target? |
|
1-2V6VWD
|
Is the DT9836 from Data Translation supported by xPC target 2.9 (R2006a) ? |
|
1-57FT94
|
How can I determine the base address for my Sensoray 526 board in xPC Target? |
|
1-4OO7XT
|
How can I use a single General Standards PCI-ADADIO card with an external trigger in Burst Scan mode with xPC Target 3.2 (R2007a)? |
|
1-6JKGBJ
|
Why am I unable to establish a connection between my host and target machines while using an external Ethernet card in xPC Target 3.3 (R2007b)? |
|
1-1A0EN
|
Why does the CIO-QUAD04 or PCI-QUAD04 Incremental Encoder block miss counts with xPC Target 2.0.1 (R13SP1)? |
|
1-1BUQX
|
Does xPC Target support frame grabbers? |
|
1-6K4STP
|
Is the Intel Pro/1000 MT Ethernet card supported in xPC Target 3.4 (R2008a)? |
|
1-1CB89
|
Is it possible to resume the link to the xPC Target after accidentally shutting down MATLAB? |
|
1-4TV3Q7
|
Why do I have difficulties with host-target communication in a newer release of xPC Target, but not in an older one? |
Store 
Help us improve our site
Take a short survey
