Design and Verify Signal Processing and Communications Systems, Part 3: DSP Early Software Verification

From the series: Design and Verify Signal Processing Systems Using MATLAB and Simulink

Arvind Ananthan, MathWorks

This webinar is the third of a three-part series that demonstrates how you can reduce verification time by eliminating design flaws earlier in your development process.

In this webinar we will introduce the following MathWorks DSP verification products: Embedded IDE Link™ CC (for TI’s Code Composer Studio™) and Embedded IDE Link™ VS (for Analog Devices™ VisualDSP++®).

Learn how these products enable engineers to:


• Develop algorithms in MATLAB and Simulink and rapidly prototype them on Texas Instruments and Analog Devices processors through code generation
• Script verification tasks in MATLAB such as setting breakpoints in the code or accessing and changing DSP memory.
• Perform processor-in-the-loop simulation with a Simulink test bench both feeding stimulus to the algorithm running on the processor and displaying/analyzing the results back in the Simulink environment
• Profile the application running on target processor to identify

Product Focus

  • Embedded Coder

Recorded: 23 Jun 2009

Series: Design and Verify Signal Processing Systems Using MATLAB and Simulink

Design and Verify Signal Processing and Communications Systems, Part 1: Modeling and Simulation
As you develop complex signal processing algorithms and systems, how do you verify that your design works as intended in context with the entire system? Do you find that you are spending more time on testing than on developing algorithm IP for your p

Design and Verify Signal Processing and Communications Systems, Part 2: HDL Functional Verification
In this webinar we will explore how the EDA Simulator Links allow MATLAB or Simulink and your HDL Simulator to work together to create a better debug and verification environment to improve your product quality and shorten your development time. Thro

Design and Verify Signal Processing and Communications Systems, Part 3: DSP Early Software Verification
This webinar is the third of a three-part series that demonstrates how you can reduce verification time by eliminating design flaws earlier in your development process. In this webinar we will introduce the following MathWorks DSP verification produc