MATLAB Examples

Generate HDL code from MATLAB functions using automated lookup table generation

This example shows HDL code generation from a floating-point MATLAB® design that is not ready for code generation in two steps. First we use float2fixed conversion process to generate a lookup table based MATLAB function replacements. Next this new MATLAB replacement function is used to generate the HDL code. However these two steps are opaque to the user due to the way float2fixed and MATLAB HDL Coder are invoked.

Contents

Introduction

The MATLAB code used in the example is an implementation of a variable exponent function.

MATLAB Design

design_name = 'mlhdlc_replacement_exp';
testbench_name = 'mlhdlc_replacement_exp_tb';

Lets look at the gamma correction Design

dbtype(design_name)
1     function y = mlhdlc_replacement_exp(u)
2     
3     %   Copyright 2014-2015 The MathWorks, Inc.
4     
5     y = exp(u);
6     
7     end

Simulate the Design

It is always a good practice to simulate the design with the testbench prior to code generation to make sure there are no runtime errors.

mlhdlc_replacement_exp_tb
  1. MATLAB Design: mlhdlc_replacement_exp
  2. MATLAB testbench: mlhdlc_replacement_exp_tb

Open the design function mlhdlc_european_call by clicking on the above link to notice the use of unsupported fixed-point functions like 'log', and 'exp'.

Create a New Folder and Copy Relevant Files

Execute the following lines of code to copy the necessary example files into a temporary folder.

mlhdlc_demo_dir = fullfile(matlabroot, 'toolbox', 'hdlcoder', 'hdlcoderdemos', 'matlabhdlcoderdemos');
mlhdlc_temp_dir = fullfile(tempdir(),'mlhdlc_replacement_exp');

% create a temporary folder and copy the MATLAB files
cd(tempdir);
[~, ~, ~] = rmdir(mlhdlc_temp_dir, 's');
mkdir(mlhdlc_temp_dir);
cd(mlhdlc_temp_dir);

copyfile(fullfile(mlhdlc_demo_dir, [design_name,'.m*']), mlhdlc_temp_dir);
copyfile(fullfile(mlhdlc_demo_dir, [testbench_name,'.m*']), mlhdlc_temp_dir);

Notes of design and testbench

The design is in the file 'mlhdlc_replacement_exp.m'. The MATLAB Test Bench is in the file 'mlhdlc_replacement_exp_tb.m' which can be run separately. We have illustrated a replacement for exp function as the purpose of this demo. You may alter the testbench for your desired responses.

Generate HDL Code using implicit fixed-point conversion

Your design is in the file 'mlhdlc_replacement_exp.m' where the exponent function is calculated. The MATLAB Test Bench is in the file 'mlhdlc_replacement_exp_tb.m' which can be run separately.

You will note that currently we do not have out-of-the-box fixed-point support for 'exp' functions, at this moment, in the design; this is where we use the ''coder.approximation'' object to enable a dynamic lookup-table replacement for these 'unsupported functions'. Run the following code as 'runme.m' file to execute the codegeneration steps.

  clear design_name testbench_name fxpCfg hdlcfg interp_degree
  hsetupedatoolsenv();
  design_name = 'mlhdlc_replacement_exp';
  testbench_name = 'mlhdlc_replacement_exp_tb';
  interp_degree = 0;
  %%    fixed point converter config
  fxpCfg = coder.config('fixpt');
  fxpCfg.TestBenchName = 'mlhdlc_replacement_exp_tb';
  fxpCfg.TestNumerics = true;
  %    specify this - for optimized HDL
  fxpCfg.DefaultWordLength = 10;
  %%    exp - replacement config
  mathFcnGenCfg = coder.approximation('exp');
  %    generally use to increase accuracy; specify this as power of 2 for optimized HDL
  mathFcnGenCfg.NumberOfPoints = 1024;
  mathFcnGenCfg.InterpolationDegree = interp_degree; %         can be 0,1,2, or 3
  fxpCfg.addApproximation(mathFcnGenCfg);
  %%    HDL config object
  hdlcfg = coder.config('hdl');
  hdlcfg.TargetLanguage = 'Verilog';
  hdlcfg.DesignFunctionName = design_name;
  hdlcfg.TestBenchName = testbench_name;
  hdlcfg.GenerateHDLTestBench=true;
  hdlcfg.SimulateGeneratedCode=true;
  %If you choose VHDL set the ModelSim compile options as well
  %    hdlcfg.TargetLanguage = 'Verilog';
  %    hdlcfg.HDLCompileVHDLCmd = 'vcom %s %s -noindexcheck \n';
  hdlcfg.ConstantMultiplierOptimization = 'auto'; %optimize out any multipliers from interpolation
  hdlcfg.PipelineVariables = 'y u idx_bot x x_idx';%
  hdlcfg.InputPipeline = 2;
  hdlcfg.OutputPipeline = 2;
  hdlcfg.RegisterInputs = true;
  hdlcfg.RegisterOutputs = true;
  hdlcfg.SynthesizeGeneratedCode = true;
  hdlcfg.SynthesisTool = 'Xilinx ISE';
  hdlcfg.SynthesisToolChipFamily = 'Virtex7';
  hdlcfg.SynthesisToolDeviceName = 'xc7vh580t';
  hdlcfg.SynthesisToolPackageName = 'hcg1155';
  hdlcfg.SynthesisToolSpeedValue = '-2G';
  %codegen('-config',hdlcfg)
  codegen('-float2fixed',fxpCfg,'-config',hdlcfg,'mlhdlc_replacement_exp')
  %If you only want to do fixed point conversion and stop/examine the
  %intermediate results you can use,
  %only F2F conversion
  codegen('-float2fixed',fxpCfg,'mlhdlc_replacement_exp')

Once you run the 'runme' script, you will see the following output from fixpt converter and HDL Coder. But before we jump ahead, let us see a few notable topics in the config objects to get the fixpt conversion, HDL generation to yield high performance hardware.

Generating high-clockrate circuits Using the number of point for replacement functions as power of 2 is recommended for HDL targets. We also supply the ConstantMultiplierOptimization = 'AUTO' to use best of FCSD or CSD approaches in generated HDL code. Note our use of pipelined variables in HDL Code generation to minimize the clock delays, and improve circuit frequency.

Output and iterative improvements

First the fixed-point conversion completes with appropriate function replacements as,

  ============= Step1: Analyze floating-point code ==============
  Input types not specified, inferring types by simulating the test bench.
  ============= Step1a: Verify Floating Point ==============
  ### Analyzing the design 'mlhdlc_replacement_exp'
  ### Analyzing the test bench(es) 'mlhdlc_replacement_exp_tb'
  ### Begin Floating Point Simulation (Instrumented)
  ### Floating Point Simulation Completed in   1.8946 sec(s)
  ### Elapsed Time:             2.8361 sec(s)
  ============= Step2: Propose Types based on Range Information ==============
  ============= Step3: Generate Fixed Point Code ==============
  ### Generating Fixed Point MATLAB Code <a href="matlab:edit('codegen/mlhdlc_replacement_exp/fixpt/mlhdlc_replacement_exp_fixpt.m')">mlhdlc_replacement_exp_fixpt</a> using Proposed Types
  ### Generating Fixed Point MATLAB Design Wrapper <a href="matlab:edit('codegen/mlhdlc_replacement_exp/fixpt/mlhdlc_replacement_exp_wrapper_fixpt.m')">mlhdlc_replacement_exp_wrapper_fixpt</a>
  ### Generating Mex file for ' mlhdlc_replacement_exp_wrapper_fixpt '
  Code generation successful: To view the report, open('codegen/mlhdlc_replacement_exp/fixpt/fxptmp/mlhdlc_replacement_exp_wrapper_fixpt/html/index.html').
  ### Generating Type Proposal Report for 'mlhdlc_replacement_exp' <a href="matlab:web('codegen/mlhdlc_replacement_exp/fixpt/mlhdlc_replacement_exp_report.html', '-new')">mlhdlc_replacement_exp_report.html</a>
  ============= Step4: Verify Fixed Point Code ==============
  ### Begin Fixed Point Simulation : mlhdlc_replacement_exp_tb
  ### Fixed Point Simulation Completed in   1.9497 sec(s)
  ### Generating Type Proposal Report for 'mlhdlc_replacement_exp_fixpt' <a href="matlab:web('codegen/mlhdlc_replacement_exp/fixpt/mlhdlc_replacement_exp_fixpt_report.html', '-new')">mlhdlc_replacement_exp_fixpt_report.html</a>
  ### Elapsed Time:             2.6488 sec(s)
  As this is a small design with only one replacement functions you can
  try different number of points in approximation function generation.
  Re-examine the generated HDL code and compare it with the previous step.
  ### Begin VHDL Code Generation
  ### Generating HDL Conformance Report <a href="matlab:web('codegen/mlhdlc_replacement_exp/hdlsrc/mlhdlc_replacement_exp_fixpt_hdl_conformance_report.html')">mlhdlc_replacement_exp_fixpt_hdl_conformance_report.html</a>.
  ### HDL Conformance check complete with 0 errors, 2 warnings, and 0 messages.
  ### Working on mlhdlc_replacement_exp_fixpt as <a href="matlab:edit('codegen/mlhdlc_replacement_exp/hdlsrc/mlhdlc_replacement_exp_fixpt.vhd')">mlhdlc_replacement_exp_fixpt.vhd</a>.
  ### Generating package file <a href="matlab:edit('codegen/mlhdlc_replacement_exp/hdlsrc/mlhdlc_replacement_exp_fixpt_pkg.vhd')">mlhdlc_replacement_exp_fixpt_pkg.vhd</a>.
  ### The DUT requires an initial pipeline setup latency. Each output port experiences these additional delays.
  ### Output port 0: 12 cycles.
  ### Output port 1: 12 cycles.
  ### Generating Resource Utilization Report '<a href="matlab:web('codegen/mlhdlc_replacement_exp/hdlsrc/resource_report.html')">resource_report.html</a>'
  ### Begin TestBench generation.
  ### Accounting for output port latency: 12 cycles.'
  ### Collecting data...
  ### Begin HDL test bench file generation with logged samples
  ### Generating test bench: codegen/mlhdlc_replacement_exp/hdlsrc/mlhdlc_replacement_exp_fixpt_tb.vhd
  ### Creating stimulus vectors ...
  ### Simulating the design 'mlhdlc_replacement_exp_fixpt' using 'ModelSim'.
  ### Generating Compilation Report codegen/mlhdlc_replacement_exp/hdlsrc/mlhdlc_replacement_exp_fixpt_vsim_log_compile.txt
  ### Generating Simulation Report codegen/mlhdlc_replacement_exp/hdlsrc/mlhdlc_replacement_exp_fixpt_vsim_log_sim.txt
  ### Simulation successful.
  ### Creating Synthesis Project for 'mlhdlc_replacement_exp_fixpt'.
  ### Synthesis project creation successful.
  ### Synthesizing the design 'mlhdlc_replacement_exp_fixpt".
  ### Generating synthesis report codegen/mlhdlc_replacement_exp/hdlsrc/ise_prj/mlhdlc_replacement_exp_fixpt_syn_results.txt.
  ### Synthesis successful.

Examine the Synthesis Results Run the logic synthesis step with the following default options if you have ISE installed on your machine. In the synthesis report, note the clock frequency reported by the synthesis tool without any optimization options enabled. Typically timing performance of this design using Xilinx ISE synthesis tool for the Virtex7 chip family, device xc7vh580t, package hcg1155, speed grade -2G, with a a high clock speed in order of 300 MHz.

Clean up the Generated Files

You can run the following commands to clean up the temporary project folder.

mlhdlc_demo_dir = fullfile(matlabroot, 'toolbox', 'hdlcoder', 'hdlcoderdemos', 'matlabhdlcoderdemos');
mlhdlc_temp_dir = [tempdir 'mlhdlc_replacement_exp'];
clear mex;
cd (mlhdlc_demo_dir);
rmdir(mlhdlc_temp_dir, 's');