Optimization of the Solar Cell block's parameters to fit data defined over a range of different temperatures. It uses the MATLAB® optimization function fminsearch. Other products
An implementation of a triangle wave generator circuit using two op-amps. The first stage of the circuit is a comparator constructed from an op-amp. The output of the comparator is limited to
Two ways to create a model of an integrated circuit that can be used in conjunction with other Simscape™ Electronics™ blocks. The first approach is to build a behavioral model using Simscape
Model a J-K flip-flop from Simscape™ Electronics™ logic components. With the two switches in their default positions, both inputs to the flip-flop are set high so its output state toggles
A pulse-width-modulated (PWM) output implemented using a 555 Timer in astable mode. The duty cycle is set by a potentiometer, P1. The potentiometer is controlled during run-time via Duty
This model shows how the Multiplier block can be used to multiply or divide two input voltages. In both cases, slew rate limiting occurs until the final voltage is reached. Note that the
An implementation of an astable oscillator circuit. The circuit output voltage V2 oscillates in an unstable fashion between high and low states.
An implementation of a Colpitts oscillator circuit with a nominal frequency of 9MHz. The frequency of oscillation is given by 1/(2*pi*sqrt(L1*C1*C2/(C1+C2))). LC oscillators have good