Demonstrates how to test a transmission shift logic controller using test sequences and test assessments.
Demonstrates cloning an existing test harness and exporting the cloned harness to a separate model. This can be useful if you want to create a copy of a test harness as a separate model, but
Increase coverage of a test case by generating tests using Simulink® Design Verifier™. Copyright 2016 The MathWorks, Inc.
Perform code generation verification for a model. Copyright 2015 The MathWorks, Inc.
Test and optimize a physical system using a test sequence, test harness, and the test manager. Copyright 2015 The MathWorks, Inc.
Perform real-time testing on a target computer and verify system behavior against requirements. Copyright 2016 The MathWorks, Inc.
Using a custom criteria script, verify that wing oscillations are damped in multiple altitude and airspeed conditions.
Set and get custom criteria using the programmatic interface.
Use MATLAB® Unit Test to test a model, and use the TAPPlugin to create TAP results. You can use TAP with CI systems. The model is a controller-plant system of a flight controller, aircraft
Create and run a basic MATLAB® Unit Test for a test file created in Simulink® Test™. You create a test suite, run the test, and display the diagnostic report.
Change test harness settings for different verification objectives.
Synchronize and rebuild a test harness from the main model.
Generate test cases based on model hierarchy. Copyright 2015 The MathWorks, Inc.
Report test results for a baseline test. Copyright 2015 The MathWorks, Inc.
Verify a model against a baseline using a parameter override and the Test Manager. Copyright 2015 The MathWorks, Inc.
Test a transmission controller using a test harness and test sequence.
Messages carry data between Test Sequence blocks and other blocks such as Stateflow® charts. Messages can be used to model asynchronous events. A message is queued until you evaluate it,
Create a test sequence programmatically. You create a Test Sequence block, and author a test sequence to verify two safety requirements of a cruise control system.
Simulink® Test™ outputs graphical results of the Model Verification block library so you can use the Test Manager or Simulation Data Inspector to see when your test assessments pass and
Call an externally-defined function from the Test Sequence block. Define a function in a script on the MATLAB® path, and call the function from the test sequence.
Reuse test assessments contained in a test sequence block using a linked block from a library.
Use a post-create callback to customize a test harness. The callback changes one harness source from an Inport block to Constant block and enables signal logging in the test harness.
A basic workflow of updating a parameter in a test harness, checking the synchronization between the test harness and main model, and pushing the parameter change from the test harness to the