Analog Input and Output

Acquire and generate analog signals with devices from supported vendors

With the toolbox you can use multiple devices and achieve various analog measurement types, including temperature, current, and accelerometer.

Frequently Viewed Topics

Featured Examples

Acquire Data and Generate Signals at the Same Time

Acquire Data and Generate Signals at the Same Time

Acquire and generate data using two National Instruments modules operating at the same time.

Open Script
Acquiring and Generating Data at the Same Time with Digilent Analog Discovery

Acquiring and Generating Data at the Same Time with Digilent Analog Discovery

Synchronously generate and acquire voltage data at a rate of 300 kHz.

Open Script
Generate Standard Periodic Waveforms Using Digilent Analog Discovery

Generate Standard Periodic Waveforms Using Digilent Analog Discovery

Use function generator channels to generate a 1 kHz sinusoidal waveform, and record data at the same time, using an analog input channel.

Open Script
Generate Arbitrary Periodic Waveforms Using Digilent Analog Discovery

Generate Arbitrary Periodic Waveforms Using Digilent Analog Discovery

Use function generator channels to generate an arbitrary 1kHz waveform function, and record data at the same time, using an analog input channel.

Open Script
Characterize an LED with ADALM1000

Characterize an LED with ADALM1000

Use MATLAB to connect to an Analog Devices ADALM1000 source-measurement unit, configure it, and make current and voltage measurements to characterize an LED.

Open Live Script
Estimate the Transfer Function of a Circuit with ADALM1000

Estimate the Transfer Function of a Circuit with ADALM1000

Use MATLAB to connect to an ADALM1000 source-measurement unit, configure it to generate an arbitrary signal, make live measurements, and use the measurements to calculate the transfer function of the connected circuit.

Open Live Script

Data Acquisition Toolbox Documentation

Support