Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Alphabetical List
By Category

`phased.CosineAntennaElement` | Cosine antenna element |

`phased.CrossedDipoleAntennaElement` | Crossed-dipole antenna element |

`phased.CustomAntennaElement` | Custom antenna element |

`phased.IsotropicAntennaElement` | Isotropic antenna element |

`phased.ShortDipoleAntennaElement` | Short-dipole antenna element |

`phased.CustomMicrophoneElement` | Custom microphone |

`phased.OmnidirectionalMicrophoneElement` | Omnidirectional microphone |

`phased.IsotropicHydrophone` | Isotropic hydrophone |

`phased.IsotropicProjector` | Isotropic projector |

`aperture2gain` | Convert effective aperture to gain |

`gain2aperture` | Convert gain to effective aperture |

`uv2azel` | Convert u/v coordinates to azimuth/elevation angles |

`azel2uv` | Convert azimuth/elevation angles to u/v coordinates |

`phitheta2azel` | Convert angles from phi/theta form to azimuth/elevation form |

`azel2phitheta` | Convert angles from azimuth/elevation form to phi/theta form |

`uv2phitheta` | Convert u/v coordinates to phi/theta angles |

`phitheta2uv` | Convert phi/theta angles to u/v coordinates |

`uv2azelpat` | Convert radiation pattern from u/v form to azimuth/elevation form |

`azel2uvpat` | Convert radiation pattern from azimuth/elevation form to u/v form |

`phitheta2azelpat` | Convert radiation pattern from phi/theta form to azimuth/elevation form |

`azel2phithetapat` | Convert radiation pattern from azimuth-elevation to phi-theta coordinates |

`uv2phithetapat` | Convert radiation pattern from u/v form to phi/theta form |

`phitheta2uvpat` | Convert radiation pattern from phi/theta form to u/v form |

`polellip` | Parameters of ellipse traced out by tip of a polarized field vector |

`polratio` | Ratio of vertical to horizontal linear polarization components of a field |

`pol2circpol` | Convert linear component representation of field to circular component representation |

`circpol2pol` | Convert circular component representation of field to linear component representation |

`stokes` | Stokes parameters of polarized field |

`polloss` | Polarization loss |

`polsignature` | Copolarization and cross-polarization signatures |

`polarpattern` | Interactive plot of radiation patterns in polar format |

`phased.ULA` | Uniform linear array |

`phased.URA` | Uniform rectangular array |

`phased.UCA` | Uniform circular array |

`phased.ConformalArray` | Conformal array |

`phased.PartitionedArray` | Phased array partitioned into subarrays |

`phased.ReplicatedSubarray` | Phased array formed by replicated subarrays |

`phased.HeterogeneousConformalArray` | Heterogeneous conformal array |

`phased.HeterogeneousULA` | Heterogeneous uniform linear array |

`phased.HeterogeneousURA` | Heterogeneous uniform rectangular array |

`phased.SteeringVector` | Sensor array steering vector |

`phased.ElementDelay` | Sensor array element delay estimator |

`phased.ArrayGain` | Sensor array gain |

`phased.ArrayResponse` | Sensor array response |

`az2broadside` | Convert azimuth and elevation angle to broadside angle |

`broadside2az` | Convert broadside angle to azimuth angle |

`pilotcalib` | Array calibration using pilot sources |

`steervec` | Steering vector |

`taylortaperc` | Taylor nbar taper for arrays |

`polarpattern` | Interactive plot of radiation patterns in polar format |

`phased.Collector` | Narrowband signal collector |

`phased.Radiator` | Narrowband signal radiator |

`phased.WidebandCollector` | Wideband signal collector |

`phased.WidebandRadiator` | Wideband signal radiator |

`sensorsig` | Simulate received signal at sensor array |

`sensorcov` | Sensor spatial covariance matrix |

`phased.Transmitter` | Transmitter |

`phased.ReceiverPreamp` | Receiver preamp |

`sensorsig` | Simulate received signal at sensor array |

`sensorcov` | Sensor spatial covariance matrix |

`noisepow` | Receiver noise power |

`systemp` | Receiver system-noise temperature |

`delayseq` | Delay or advance sequence |

`phased.LinearFMWaveform` | Linear FM pulse waveform |

`phased.PhaseCodedWaveform` | Phase-coded pulse waveform |

`phased.RectangularWaveform` | Rectangular pulse waveform |

`phased.SteppedFMWaveform` | Stepped FM pulse waveform |

`phased.PulseWaveformLibrary` | Create a library of pulse waveforms |

`spectrogram` | Spectrogram using short-time Fourier transform |

`phased.FMCWWaveform` | FMCW waveform |

`phased.MFSKWaveform` | MFSK waveform |

`spectrogram` | Spectrogram using short-time Fourier transform |

`phased.MatchedFilter` | Matched filter |

`ambgfun` | Ambiguity and crossambiguity function |

`pambgfun` | Periodic ambiguity function |

`bw2range` | Convert bandwidth to range resolution |

`range2bw` | Convert range resolution to required bandwidth |

`range2time` | Convert propagation distance to propagation time |

`time2range` | Convert propagation time to propagation distance |

`unigrid` | Uniform grid |

`phased.LCMVBeamformer` | Narrowband LCMV beamformer |

`phased.MVDRBeamformer` | Narrowband minimum-variance distortionless-response beamformer |

`phased.PhaseShiftBeamformer` | Narrowband phase shift beamformer |

`phased.SteeringVector` | Sensor array steering vector |

`phased.FrostBeamformer` | Frost beamformer |

`phased.GSCBeamformer` | Generalized sidelobe canceler beamformer |

`phased.SubbandMVDRBeamformer` | Wideband minimum-variance distortionless-response beamformer |

`phased.SubbandPhaseShiftBeamformer` | Subband phase shift beamformer |

`phased.TimeDelayBeamformer` | Time delay beamformer |

`phased.TimeDelayLCMVBeamformer` | Time delay LCMV beamformer |

`cbfweights` | Conventional beamformer weights |

`lcmvweights` | Narrowband linearly constrained minimum variance (LCMV) beamformer weights |

`mvdrweights` | Minimum variance distortionless response (MVDR) beamformer weights |

`steervec` | Steering vector |

`az2broadside` | Convert azimuth and elevation angle to broadside angle |

`broadside2az` | Convert broadside angle to azimuth angle |

`sensorcov` | Sensor spatial covariance matrix |

`sensorsig` | Simulate received signal at sensor array |

`pilotcalib` | Array calibration using pilot sources |

`phased.BeamscanEstimator` | Beamscan spatial spectrum estimator for ULA |

`phased.BeamspaceESPRITEstimator` | Beamspace ESPRIT direction of arrival (DOA) estimator for ULA |

`phased.ESPRITEstimator` | ESPRIT direction of arrival (DOA) estimator for ULA |

`phased.MVDREstimator` | MVDR (Capon) spatial spectrum estimator for ULA |

`phased.MUSICEstimator` | Estimate direction of arrival using narrowband MUSIC algorithm for ULA |

`phased.RootMUSICEstimator` | Root MUSIC direction of arrival (DOA) estimator for ULA and UCA |

`phased.RootWSFEstimator` | Root WSF direction of arrival (DOA) estimator for ULA |

`phased.SumDifferenceMonopulseTracker` | Sum and difference monopulse for ULA |

`phased.SumDifferenceMonopulseTracker2D` | Sum and difference monopulse for URA |

`phased.BeamscanEstimator2D` | 2-D beamscan spatial spectrum estimator |

`phased.GCCEstimator` | Wideband direction of arrival estimation |

`phased.MonopulseFeed` | Creates sum and difference channels |

`phased.MonopulseEstimator` | Amplitude monopulse direction finding |

`phased.MUSICEstimator2D` | Estimate 2D direction of arrival using narrowband MUSIC algorithm |

`phased.MVDREstimator2D` | 2-D MVDR (Capon) spatial spectrum estimator |

`espritdoa` | Direction of arrival using TLS ESPRIT |

`gccphat` | Generalized cross-correlation |

`musicdoa` | Estimate arrival directions of signals using MUSIC |

`rootmusicdoa` | Direction of arrival using Root MUSIC |

`spsmooth` | Spatial smoothing |

`aictest` | Dimension of signal subspace |

`mdltest` | Dimension of signal subspace |

`az2broadside` | Convert azimuth and elevation angle to broadside angle |

`broadside2az` | Convert broadside angle to azimuth angle |

`phased.STAPSMIBeamformer` | Sample matrix inversion (SMI) beamformer |

`phased.DPCACanceller` | Displaced phase center array (DPCA) pulse canceller |

`phased.ADPCACanceller` | Adaptive DPCA (ADPCA) pulse canceller |

`phased.AngleDopplerResponse` | Angle-Doppler response |

`dopsteeringvec` | Doppler steering vector |

`val2ind` | Uniform grid index |

`phased.CFARDetector` | Constant false alarm rate (CFAR) detector |

`phased.CFARDetector2D` | Two-dimensional CFAR detector |

`phased.MatchedFilter` | Matched filter |

`phased.PulseCompressionLibrary` | Create a library of pulse compression specifications |

`phased.StretchProcessor` | Stretch processor for linear FM waveform |

`phased.TimeVaryingGain` | Time varying gain control |

`phased.AlphaBetaFilter` | Alpha-beta filter for object tracking |

`albersheim` | Required SNR using Albersheim’s equation |

`dechirp` | Perform dechirp operation on FMCW signal |

`npwgnthresh` | Detection SNR threshold for signal in white Gaussian noise |

`pulsint` | Pulse integration |

`rocpfa` | Receiver operating characteristic curves by false-alarm probability |

`rocsnr` | Receiver operating characteristic curves by SNR |

`shnidman` | Required SNR using Shnidman’s equation |

`blakechart` | Range-angle-height (Blake) chart |

`bw2range` | Convert bandwidth to range resolution |

`physconst` | Physical constants |

`radareqpow` | Peak power estimate from radar equation |

`radareqrng` | Maximum theoretical range estimate |

`radareqsnr` | SNR estimate from radar equation |

`radarvcd` | Vertical coverage diagram |

`range2bw` | Convert range resolution to required bandwidth |

`bw2range` | Convert bandwidth to range resolution |

`physconst` | Physical constants |

`range2bw` | Convert range resolution to required bandwidth |

`range2tl` | Compute underwater sound transmission loss from range |

`sonareqsl` | Compute source level using the sonar equation |

`sonareqsnr` | Compute SNR using the sonar equation |

`sonareqtl` | Compute transmission loss using the sonar equation |

`tl2range` | Compute range from underwater transmission loss |

`phased.RangeAngleResponse` | Range-angle response |

`phased.DopplerEstimator` | Doppler estimation |

`phased.RangeDopplerResponse` | Range-Doppler response |

`phased.AngleDopplerResponse` | Angle-Doppler response |

`phased.RangeEstimator` | Range estimation |

`phased.RangeResponse` | Range response |

`beat2range` | Convert beat frequency to range |

`range2beat` | Convert range to beat frequency |

`rdcoupling` | Range Doppler coupling |

`stretchfreq2rng` | Convert frequency offset to range |

`blakechart` | Range-angle-height (Blake) chart |

`bw2range` | Convert bandwidth to range resolution |

`physconst` | Physical constants |

`radareqpow` | Peak power estimate from radar equation |

`radareqrng` | Maximum theoretical range estimate |

`radareqsnr` | SNR estimate from radar equation |

`radarvcd` | Vertical coverage diagram |

`range2bw` | Convert range resolution to required bandwidth |

`bw2range` | Convert bandwidth to range resolution |

`physconst` | Physical constants |

`range2bw` | Convert range resolution to required bandwidth |

`range2tl` | Compute underwater sound transmission loss from range |

`sonareqsl` | Compute source level using the sonar equation |

`sonareqsnr` | Compute SNR using the sonar equation |

`sonareqtl` | Compute transmission loss using the sonar equation |

`tl2range` | Compute range from underwater transmission loss |

`phased.IntensityScope` | Range-time-intensity (RTI) or Doppler-time-intensity (DTI) display |

`phased.RadarTarget` | Radar target |

`phased.BackscatterRadarTarget` | Backscatter radar target |

`phased.BackscatterSonarTarget` | Sonar target backscatter |

`phased.WidebandBackscatterRadarTarget` | Backscatter wideband signal from radar target |

`phased.BarrageJammer` | Barrage jammer |

`phased.ConstantGammaClutter` | Constant gamma clutter simulation |

`phased.gpu.ConstantGammaClutter` | Simulate constant-gamma clutter using GPU |

`phased.UnderwaterRadiatedNoise` | Radiate acoustic noise from underwater or surface sound source |

`billingsleyicm` | Billingsley’s intrinsic clutter motion (ICM) model |

`depressionang` | Depression angle of surface target |

`grazingang` | Grazing angle of surface target |

`horizonrange` | Horizon range |

`physconst` | Physical constants |

`surfacegamma` | Gamma value for different terrains |

`surfclutterrcs` | Surface clutter radar cross section (RCS) |

`phased.FreeSpace` | Free space environment |

`phased.LOSChannel` | Narrowband LOS propagation channel |

`phased.TwoRayChannel` | Two-ray propagation channel |

`phased.ScatteringMIMOChannel` | Scattering MIMO channel |

`phased.IsoSpeedUnderwaterPaths` | Isospeed multipath sonar channel |

`phased.MultipathChannel` | Propagate signals in multipath channel |

`phased.WidebandFreeSpace` | Wideband freespace propagation |

`phased.WidebandLOSChannel` | Wideband LOS propagation channel |

`phased.WidebandTwoRayChannel` | Wideband two-ray propagation channel |

`diagbfweights` | Diagonalize MIMO channel |

`fogpl` | RF signal attenuation due to fog and clouds |

`fspl` | Free space path loss |

`gaspl` | RF signal attenuation due to atmospheric gases |

`rainpl` | RF signal attenuation due to rainfall |

`rangeangle` | Range and angle calculation |

`scatteringchanmtx` | Scattering channel matrix |

`waterfill` | Waterfill MIMO power distribution |

`effearthradius` | Effective earth radius |

`physconst` | Physical constants |

`phased.Platform` | Model platform motion |

`phased.ScenarioViewer` | Display motion of radars and targets |

`dop2speed` | Convert Doppler shift to speed |

`speed2dop` | Convert speed to Doppler shift |

`radialspeed` | Relative radial speed |

`rangeangle` | Range and angle calculation |

`global2localcoord` | Convert global to local coordinates |

`local2globalcoord` | Convert local to global coordinates |

`rotx` | Rotation matrix for rotations around x-axis |

`roty` | Rotation matrix for rotations around y-axis |

`rotz` | Rotation matrix for rotations around z-axis |

`cart2sphvec` | Convert vector from Cartesian components to spherical representation |

`sph2cartvec` | Convert vector from spherical basis components to Cartesian components |

`azelaxes` | Spherical basis vectors in 3-by-3 matrix form |

`uv2azel` | Convert u/v coordinates to azimuth/elevation angles |

`azel2uv` | Convert azimuth/elevation angles to u/v coordinates |

`phitheta2azel` | Convert angles from phi/theta form to azimuth/elevation form |

`azel2phitheta` | Convert angles from azimuth/elevation form to phi/theta form |

`uv2phitheta` | Convert u/v coordinates to phi/theta angles |

`phitheta2uv` | Convert phi/theta angles to u/v coordinates |

`phased.gpu.ConstantGammaClutter` | Simulate constant-gamma clutter using GPU |