Start a New Simscape Fluids Model

You can use the Simscape™ model template as a starting point for your Simscape Fluids™ models. The template includes the required Solver Configuration block and the commonly used Simulink-PS Converter and PS-Simulink Converter blocks.

To open the Simscape model template, at the MATLAB® command prompt, enter ssc_new. Simscape software opens the model template along with the Foundation library. Enter SimscapeFluids_lib to open the Simscape Fluids block library.

The figure shows the Simscape model template. Drag blocks from the Simscape and Simscape Fluids libraries to represent the various system components. Use specialized blocks from physical modeling products such as Simscape Multibody™ and Simscape Driveline™ to model multiphysics systems.