Note: This page has been translated by MathWorks. Click here to see

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Planetary gear set of carrier, beveled planet, and sun wheels with adjustable gear ratio, assembly orientation, and friction losses

Simscape / Driveline / Gears / Planetary Subcomponents

The Sun-Planet Bevel gear block represents a set of carrier, planet, and sun gear wheels. The planet is connected to and rotates with respect to the carrier. The planet and sun corotate with a fixed gear ratio. You control the direction of rotation by setting the assembly orientation, left or right. A sun-planet and a ring-planet gear are basic elements of a planetary gear set. For model details, see Sun-Planet Bevel Gear Model.

You can model the effects of heat flow and temperature change through an optional thermal
conserving port. By default, the thermal port is hidden. To expose the thermal port,
right-click the block in your model and, from the context menu, select **Simscape** > **Block choices**. Select a variant that includes a thermal port. Specify the associated thermal
parameters for the component.

Sun-Planet Bevel imposes one kinematic and one geometric constraint on the three connected axes.

$${r}_{C}{\omega}_{C}={r}_{S}{\omega}_{S}\pm {r}_{P}{\omega}_{P}$$

$${r}_{C}={r}_{S}\pm {r}_{P}$$

Where:

*r*is the radius of the carrier gear._{C}*ω*is the angular velocity of the carrier gear._{C}*r*is the radius of the sun gear._{S}*ω*is the angular velocity of the sun gear._{S}*r*is the radius of the planet gear._{P}*ω*is the angular velocity of the planet gear._{P}

The planet-sun gear ratio is defined as

$${g}_{PS}=\frac{{r}_{P}}{{r}_{S}}=\frac{{N}_{P}}{{N}_{S}},$$

where:

*g*is the planet-sun gear ratio. As $${r}_{P}>{r}_{S}$$, $${g}_{PS}>1$$._{PS}

*N*is the number of teeth in the planet gear._{P}*N*is the angular velocity of the sun gear._{S}

In terms of this ratio, the key kinematic constraint is:

$${\omega}_{S}={g}_{PS}{\omega}_{P}-{\omega}_{C}$$ for a left-oriented bevel assembly

$${\omega}_{S}={g}_{PS}{\omega}_{P}+{\omega}_{C}$$ for a right-oriented bevel assembly

The three degrees of freedom reduce to two independent degrees of freedom. The gear pair is
(1,2) = (*S*,*P*).

The planet-sun gear ratio, *g _{PS}*, must be strictly
greater than one.

The torque transfer is defined as

$${\tau}_{P}={\tau}_{loss}-{g}_{PS}{\tau}_{S},$$

where:

*τ*is the torque loss._{loss}*τ*is the torque for the sun gear._{s}*τ*is the torque for the planet gear._{p}

For the ideal case, there is no torque loss, that is $${\tau}_{loss}=0$$. Then the torque transfer equation is $${\tau}_{P}={g}_{PS}{\tau}_{S}$$.

In the nonideal case, $${\tau}_{loss}\ne 0$$. See Model Gears with Losses.

Gear inertia is assumed negligible.

Gears are treated as rigid components.

Coulomb friction slows down simulation. See Adjust Model Fidelity.

Port | Description |
---|---|

C | Rotational conserving port representing the gear carrier |

P | Rotational conserving port representing the planet gear |

S | Rotational conserving port representing the sun gear |

H | Thermal conserving port for thermal modeling |

**Planet (P) to sun (S) teeth ratio (NP/NS)**Ratio

*g*_{PS}of the planet gear wheel radius to the sun gear wheel radius. This gear ratio must be strictly greater than 1. The default value is`2`

.**Assembly orientation**Relative orientation of sun and planet gears, controlling their corotation direction. Left or right orientation imply, respectively, that the gears corotate in the same or opposite direction.

The default is

`Left — Sun and planet gears rotate in same direction`

.

Parameters for meshing and friction losses vary with the block variant chosen—one with a thermal port for thermal modeling and one without it.

**Sun-carrier viscous friction coefficient**Viscous friction coefficient

*μ*_{S}for the sun-carrier gear motion. The default is`0`

.From the drop-down list, choose units. The default is newton-meters/(radians/second) (

`N*m/(rad/s)`

).

**Thermal mass**Thermal energy required to change the component temperature by a single degree. The greater the thermal mass, the more resistant the component is to temperature change. The default value is

`50`

J/K.**Initial temperature**Component temperature at the start of simulation. The initial temperature alters the component efficiency according to an efficiency vector that you specify, affecting the starting meshing or friction losses. The default value is

`300`

K.

For optimal simulation performance, use the **Meshing Losses** > **Friction model** parameter default setting, ```
No meshing losses - Suitable
for HIL simulation
```

.