Compute active and reactive powers using voltage and current phasors
Simscape / Electrical / Specialized Power Systems / Sensors and Measurements
The Power (Phasor) block computes the active power P and reactive power Q of a pair of voltage-current signals. P and Q are computed as follows:
I* = complex conjugate of I.
Sign conventions are defined as
The phasor (complex signal) voltage, in volts peak.
The phasor (complex signal) current, in amperes peak.
Returns the active power, in watts.
Returns the active power, in vars.
shows the use of the Power (Phasor) block.