Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

Data Import

Touchstone data files, network parameter data entry, AMP files

Using RF Toolbox™ functions and classes to read data and generate network parameters or network objects from industry-standard Touchstone files (.s2p, .y2p, .z2p, and .h2p) and AMP files, a MathWorks® file format.

To learn how to import and create networks, see Create and Import Circuits.

To understand how this toolbox represents S-parameters and AMP files, see S-Parameter Notation and AMP File Data Sections.

Using Objects

rfckt.datafileComponent or network from file data
rfckt.mixer2-port representation of RF mixer and its local oscillator
rfckt.passivePassive component or network
rfdata.dataStore result of circuit object analysis
rfdata.ip3Store frequency-dependent, third-order intercept points
rfdata.mixerspurStore data from intermodulation table
rfdata.networkStore frequency-dependent network parameters
rfdata.nfStore frequency-dependent noise figure data for amplifiers or mixers
rfdata.noiseStore frequency-dependent spot noise data for amplifiers or mixers
rfdata.powerStore output power and phase information for amplifiers or mixers

Functions

readRead RF data from file to new or existing circuit or data object
restoreRestore data to original frequencies
sparametersS-parameter object
yparametersCreate Y-parameter object
zparametersCreate Z-parameter object
abcdparametersCreate ABCD parameter object
gparametersCreate hybrid-g parameter object
hparametersCreate hybrid parameter object
tparametersCreate T-parameter object

Examples and How To

Specify or Import Component Data

Explains how to define and retrieve object property values.

Create RF Objects

Explains how to create new RF objects and copy existing objects.

Create and Import Circuits

Describes building and importing RF circuit objects in the RF Design and Analysis app.

Concepts

S-Parameter Notation

Introduces the RF Toolbox S-parameter notation.

AMP File Data Sections

The AMP data file describes a single nonlinear device.

Was this topic helpful?