Documentation

This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English verison of the page.

Note: This page has been translated by MathWorks. Please click here
To view all translated materals including this page, select Japan from the country navigator on the bottom of this page.

latc2tf

Convert lattice filter parameters to transfer function form

Syntax

[num,den] = latc2tf(k,v)
[num,den] = latc2tf(k,'iiroption')
num = latc2tf(k,'firoption')

Description

[num,den] = latc2tf(k,v) finds the transfer function numerator num and denominator den from the IIR lattice coefficients k and ladder coefficients v.

[num,den] = latc2tf(k,'iiroption') produces an IIR filter transfer function according to the value of 'iiroption':

  • 'allpole': Produces an all-pole filter transfer function from the associated all-pole IIR lattice filter coefficients k.

  • 'allpass': Produces an allpass filter transfer function from the associated allpass IIR lattice filter coefficients k.

num = latc2tf(k,'firoption') produces an FIR filter according to the value of 'firoption':

  • 'min': Produces a minimum-phase FIR filter numerator from the associated minimum-phase FIR lattice filter coefficients k.

  • 'max': Produces a maximum-phase FIR filter numerator from the associated maximum-phase FIR lattice filter coefficients k.

  • 'FIR': Produces a general FIR filter numerator from the lattice filter coefficients k (this is equivalent to not specifying 'iiroption' or 'firoption').

See Also

|

Introduced before R2006a

Was this topic helpful?