Flow connection between hydraulic and isothermal liquid networks
Simscape / Foundation Library / Hydraulic / Hydraulic Utilities
The Interface (H-IL) block represents a cross-domain flow connection between hydraulic and isothermal liquid networks:
Pressure and mass flow rates are equal at the interface.
Fluid properties are not shared across the interface. Each network has its own fluid properties.
Use this block in existing models with blocks from the Foundation > Hydraulic library, or from the Fluids > Hydraulics (Isothermal) library, to implement parts of the model using Isothermal Liquid library blocks, without converting the whole model. The Fluids > Hydraulics (Isothermal) library is available if you have a Simscape™ Fluids™ license.
hydraulicToIsothermalLiquid conversion tool replaces Hydraulic
blocks in your model with equivalent Isothermal Liquid blocks. If your model contains
references or links to other libraries, models, or subsystems, you can use the
Interface (H-IL) to restore the broken connections between
the converted parts of the block diagram and the libraries, models, or subsystems that still
need to be converted.
H — Hydraulic port
Hydraulic conserving port representing a passage point through the interface. Connect this port to a block network built on the Simscape hydraulic domain.
IL — Isothermal liquid port
Isothermal liquid conserving port representing a passage point through the interface. Connect this port to a block network built on the Simscape isothermal liquid domain.
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Introduced in R2020a