Check that one signal is always greater than another signal
The Check Dynamic Upper Bound block checks that the amplitude of a reference signal is greater than the amplitude of a test signal at the current time step. The test signal is the signal connected to the input labeled sig. If the verification condition is true, the block does nothing. If not, the block halts the simulation, by default, and displays an error message.
The Check Dynamic Upper Bound block and its companion blocks in the Model Verification library are intended to facilitate creation of self-validating models. For example, you can use model verification blocks to test that signals do not exceed specified limits during simulation. When you are satisfied that a model is correct, you can turn error-checking off by disabling the verification blocks. You do not have to physically remove them from the model. If you need to modify a model, you can temporarily turn the verification blocks back on to ensure that your changes do not break the model.
Note: For information about how Simulink® Coder™ generated code handles Model Verification blocks, see Debug.
The Check Dynamic Upper Bound block accepts input signals of any dimensions and of any numeric data type that Simulink supports. The test and the reference signals must have the same dimensions and data type. If the inputs are nonscalar, the block compares each element of the input test signal to the corresponding elements of the reference signal.
For more information, see Data Types Supported by Simulink in the Simulink documentation.
Clearing this check box disables the Check Dynamic Upper Bound block, that is, causes the model to behave as if the block did not exist. The Model Verification block enabling setting under Debugging on the Data Validity diagnostics pane of the Configuration Parameters dialog box allows you to enable or disable all model verification blocks, including Check Dynamic Upper Bound blocks, in a model regardless of the setting of this option.
Specify a MATLAB® expression to evaluate when the assertion fails. Because the expression is evaluated in the MATLAB workspace, define all variables used in the expression in that workspace.
Selecting this check box causes the Check Dynamic Upper Bound block to halt the simulation when the block's output is zero and display an error in the Diagnostic Viewer. Otherwise, the block displays a warning message in the MATLAB Command Window and continues the simulation.
Selecting this check box causes the Check Dynamic Upper Bound
block to output a Boolean signal that is true (
at each time step if the assertion succeeds and false (
if the assertion fails. The data type of the output signal is
you have selected the Implement logic signals as Boolean
data check box on the Optimization pane
of the Configuration Parameters dialog box. Otherwise the data type
of the output signal is
Specify the type of icon used to display this block in a block
graphic option displays a graphical representation
of the assertion condition on the icon. The
displays a mathematical expression that represents the assertion condition.
If the icon is too small to display the expression, the text icon
displays an exclamation point. To see the expression, enlarge the
Inherited from driving block