View a Virtual World in Stereoscopic Vision
You can view a virtual world using 3D effects, so that elements in the virtual world appear to come forward or back from the plane of the monitor.
You can use stereoscopic vision with these Simulink® 3D Animation™ components:
3D World Editor
Simulink 3D Animation™ Viewer
3D Animation Player
vr.canvason a figure window
Simulink 3D Animation supports two stereoscopic vision approaches:
Anaglyph — Use red/cyan 3D glasses. Viewing a virtual world in this mode causes the colors to appear as almost grayscale. This approach does not require any special computer hardware or software.
Active stereo — Use active shutter 3D glasses. This approach preserves color effects and produces more powerful 3D effects. Active stereo requires a specially configured computer and monitor setup. For details, see Active Stereoscopic Vision Configuration.
Enable Stereoscopic Vision
By default, virtual worlds display without stereoscopic vision effects.
Right-click in the virtual world.
From the Rendering > Stereo 3D menu, select either Anaglyph or Active.
To enable stereoscopic vision by default, set the Simulink 3D
Animation Figure > Rendering > Stereo 3D preference to
Control Stereoscopic Effects
You can control the following stereoscopic effects interactively or using preferences.
|Stereo 3D Effect
|Figure > Rendering Preference
Distance between the two points of view (cameras) that produce the 3D effect. The higher the offset, the further apart the cameras are, and thus the deeper the 3D effect.
Shift+K increases the offset.
Shift+J decreases the offset.
Stereo 3D Camera Offset
default value is
Horizontal image translation (HIT)
The horizontal relationship of the two stereo images. By default, the background image is at zero and the foreground image appears to pop out from the monitor toward the person viewing the virtual world.
You can specify a value from 0 through 1, inclusive. The larger the value, the further back the background appears to be.
Shift+O increases the distance back for the background image.
Shift+P decreases the distance back for the background image.
Stereo 3D Horizontal Image Translation
default value is
You can also control the camera offset and horizontal image
translation programmatically, using
vr.utils.stereo3d. If you use a
you can also control the color filters for the left and right cameras.