This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Absolute Time Temporal Logic Using the DURATION Operator

This example models an automotive transmission system using the Stateflow® duration operator. The Stateflow chart uses duration to automatically shift gears based on the vehicle's throttle requirements and speed.

Model Description

There are five major blocks in this model.

  • User Inputs: Provides two inputs to the model viz. brake and throttle.

  • Engine: Calculates engine RPM based on impeller torque value and throttle.

  • Gear_logic: Calculates next gear based on current gear, throttle, and current vehicle speed.

  • Transmission: Calculates impeller and output torque based on RPM, gear and transmission speed.

  • Vehicle: Calculates vehicle and transmission speed based on output torque and brake.

Chart Description

The Stateflow chart models the shifting of gears based on throttle and speed of the vehicle. The down_threshold and up_threshold outputs represent minimum and maximum speed values that throttle and current gear are able to handle. The Simulink function 'calculate_thresholds' calculates these two values using throttle and current gear as inputs. If the actual speed is higher than up_threshold value for longer than TWAIT then chart transitions to higher gear. Conversely, if the actual speed is lower than the down_threshold for longer than TWAIT then the chart transitions to a lower gear. At each time step, duration operator is called to get the amount of time for which speed is higher than up_threshold. If this time exceeds TWAIT then boolean variable 'up' is set which in turn transitions chart from current gear to a higher gear. Conversely the chart transitions to a lower gear based on the value of 'down_threshold'.

Active State Data

Active State Data is the enumerated data that represents the current active state during simulation. For more information, see: Active State Data. In this chart, the output data 'gear' maintains the current active state which in turn represents the current gear. This data automatically updates when a transition is taken. The data is used by downstream blocks as well as the Simulink® function calculate_thresholds.


To visualize these changes, simulate the model and open the scope.

Was this topic helpful?