Main Content

ThingSpeak Write

Publish data to the Internet of Things using ThingSpeak

Description

You can publish data from your target hardware to the Internet of Things using ThingSpeak.

ThingSpeak is “an application platform for the Internet of Things. ThingSpeak allows you to build application around data collected by sensors. Features of ThingSpeak include, real-time data collection, data processing, visualizations, apps, and plugins.”

Click View pin map to open the Arduino Pin Mapping table .

To know how to assign pins for the block, see Arduino Pin Mapping for Timer Independent Blocks.

For more information, search the Help for “Publish/Retrieve Data to Internet of Things using ThingSpeak”.

Parameters

Main

Channel ID

Get the Channel ID parameter from your channel in ThingSpeak.com.

After creating a ThingSpeak channel for your target hardware:

  1. In the ThingSpeak.com website, select Channels > My Channels.

  2. Under the channel that you created for this target hardware, click Settings.

  3. Click the Channel Settings tab and copy the Channel ID.

  4. Open the ThingSpeak Write block in your model and paste the value into the Channel ID parameter.

Write API key

Get the key for this parameter from the Write API Key parameter in ThingSpeak.com.

After creating a ThingSpeak channel for your target hardware:

  1. In the thingspeak.com website, select Channels > My Channels.

  2. Under the channel that you created for this target hardware, click Settings.

  3. Click the API Keys tab.

  4. Copy the key from Write API Key parameter.

  5. Open the ThingSpeak Write block in your model and paste the copied API key into theWrite API key parameter.

Number of variables to send

Set the number of variables to send.

The default value is 1.

Update interval

Set the number of seconds to wait between sending the data.

The default value is 60 seconds.

Print diagnostic messages

Enable getting ThingSpeak server response data and sending it to the standard output device.

Optional

Send location information

When this parameter is set to:

Input port, specify the location using a signal that is connected to the location block input.

Block dialog, specify the location using the Location (latitude, longitude, altitude) parameter.

In both cases, specify the location as a cell array of three elements:

[latitude,longitude,altitude]

Use decimal degrees notation to specify latitude and longitude. Use meters to specify altitude. For example:

  • The lowest human-sized point underground, the TauTona Mine in Carletonville, South Africa: [-26.416111,27.4275,-3900]

  • The highest point measured from sea level, the summit of Mount Everest in Nepal: [27.988056,86.925278,8848]

Location (latitude, longitude, altitude)

Setting the Send location information parameter to Block dialog displays this parameter.

Specify the location as a cell array of three elements:

[latitude,longitude,altitude]