Main Content

WebSocket Subscribe

Subscribe to the JSON data received by a WebSocket server

  • Library:
  • Simulink Support Package for Arduino Hardware / WiFi

Description

The WebSocket subscribe block subscribes to the data received by a WebSocket server identified by an IP address and a port. The received data must be in JavaScript Object Notation (JSON) format, which can be interpreted by a WebSocket client to manipulate the data.

Supported Arduino Boards

  • Arduino® MKR1000

  • Arduino MKR WIFI 1010

  • Arduino Nano 33 IoT

WebSocket JSON Data

This figure shows the signals in JSON format.

WebSocket Subscribe JSON format

Ports

Output

expand all

The block outputs the status indicating the validity of the received data.

The status is:

  • 1: Valid data

  • 0: Received data is empty or is of invalid JSON format

Data Types: int8

The data received by the WebSocket server, specified as a row vector.

The block provides an option to add up to 10 Out ports to obtain signal data, with each signal being an N-by-1 vector. N is the number of data points in a signal.

Example: [1.5,3]

Dependencies

To enable the port, specify the total number of output signals in the Number of outputs parameter. When you specify Number of Outputs, the block generates equal number of output ports. For example, if you specify Number of Outputs as 4, the block generates four output ports.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | Boolean

Parameters

expand all

The port number on the WebSocket server on which the JSON data is hosted.

The properties of the data using the Block Parameters dialog box or from a JSON file.

  • Mask Dialog –– Specify the total number of signal data using the block parameters dialog box. The block generates output ports that are equal in number to the total number of signals specified. You must also specify data size and data type of each signal using the dialog box.

  • JSON file –– If you have a JSON file that contains the signal data, upload the file by clicking the Browse button. On successfully uploading the file, the block generates output ports that are equal in number to the data signals in the specified file. The data size and data type of each signal is inherited from the file.

The total number of output signals received by the WebSocket server. When you specify a value in this parameter, the block generates output ports that are equal in number to the value specified in this parameter. For example, if you specify Number of Outputs as 4, the block generates four output ports.

Dependencies

To enable the parameter, set the Specify Output Info via parameter to Mask Dialog.

The total number of data points in an output signal.

Dependencies

To enable the parameter, set the Specify Output Info via parameter to Mask Dialog.

The data type of the output signal.

Dependencies

To enable the parameter, set the Specify Output Info via parameter to Mask Dialog.

Specify how often the block receives the data from the WebSocket server. When you specify Sample time as -1, the block inherits its sample time based on the context of the block within the model.

Introduced in R2020b