When you try to create an
arduino object as shown here,
a = arduino()
Cannot detect Arduino hardware. Make sure original Arduino hardware is properly plugged in. Otherwise, please specify both port and board type.
Specify Board Type and Port. If you see the error
Cannot detect Arduino hardware. Make sure
original Arduino hardware is properly plugged in. Otherwise, please
specify both port and board type, specify the board and type
a = arduino('COM4','Uno')
Specify Board Type and Port Correctly. If you see the error
Cannot program board Uno (COM4). Please make
sure the board is supported and the port and board type are
correct with both board type and port specified:
Make sure that you specify the correct board type.
Make sure the board type is supported. See the full list.
Make sure you are using an FTDI converter to connect the board to computer, if you are using the old ATmega328p board.
Make sure that you specify the correct port. See the Find Arduino Port on Windows, Mac, and Linux for more information.
Open Arduino® IDE (any version supports the board). Make sure you can program the same board under the same port successfully.
If you are using official Arduino boards such as Uno, Mega, Due, Micro and Leonardo, MATLAB® can autodetect the port connected to the hardware on Windows®. However, some Arduino devices are not automatically recognized, especially those that require external FTDI adaptors. In those cases, specify both the port and board type to create a connection.
Remove Bluetooth Device. If you want the Arduino hardware to communicate with the host computer via a USB
cable, remove any Bluetooth® devices connected to your Arduino hardware, and then call the
function with appropriate parameters to create your Arduino object.
Install Device Driver. If you cannot connect to official Arduino hardware, you may be missing the device driver. See Install Hardware Driver to update the hardware driver.
Manual Disconnect. If you manually disconnect the board before clearing the
arduino object from the MATLAB workspace, MATLAB will not recognize the Arduino serial port if you reconnect. Restart MATLAB, and try reconnecting the board.
Turn On the Trace Log. If you have checked for Manual Disconnect and the issue still persists, turn on the trace log by executing the following command in MATLAB.
a = arduino('COM4','Uno','Trace',true);
The trace log gives a much more detailed output of the compilation and upload results. There are some common possible causes of the error. Depending on what you see in your trace log, try the one that applies.
If you see either of these errors in the log, try the appropriate action for your release. For R2015a update the support package to the latest version, or uninstall WINAVR. For R2014a and R2014b, follow these workarounds.
C:/MATLAB/SupportPackages/R2015a/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/WInterrupts.c:19: C:/MATLAB/SupportPackages/R2015a/arduino-1.5.6-r2/hardware/arduino/sam/cores/arduino/Arduino.h:31: fatal error: avr/pgmspace.h: No such file or directory compilation terminated. cs-make: *** [C:/Users/maciej/AppData/Local/Temp/ArduinoServer/WInterrupts.c.o] Error 1
C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/avr/cores/arduino/WInterrupts.c -o C:/Users/ecsadmin/AppData/Local/Temp/ArduinoServer/WInterrupts.c.o In file included from C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/avr/cores/arduino/wiring_private.h:33, from C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/avr/cores/arduino/WInterrupts.c:33: C:/MATLAB/SupportPackages/R2014b/arduino-1.5.6-r2/hardware/arduino/avr/cores/arduino/Arduino.h:245:26: error: pins_arduino.h: No such file or directory make: *** [C:/Users/ecsadmin/AppData/Local/Temp/ArduinoServer/WInterrupts.c.o] Error 1"
If you see the following error in the log, reinstall the support package. If error still exists, report the bug to MathWorks® technical support.
In file included from C:/Users/Tom/AppData/Local/Temp/ArduinoServer/Dynamic.cpp:1, from C:/MATLAB/SupportPackages/R2015a/arduinoio/toolbox/matlab/hardware/supportpackages/arduinoio/src/MWArduino.cpp:488: C:/MATLAB/SupportPackages/R2015a/arduinoio/toolbox/matlab/hardware/supportpackages/arduinoio/+arduinoioaddons/+adafruit/src/MotorShieldV2Base.h:7:37: error: Adafruit_PWMServoDriver.h: No such file or directory make: *** [C:/Users/Tom/AppData/Local/Temp/ArduinoServer/MWArduino.cpp.o] Error 1
If you see the following error in the log, remove or rename the user-installed Firmata folder that is conflicting with the shipping Firmata library the support package downloads,
In file included from C:\Users\Max\Documents\Arduino\libraries\Firmata\utility\SerialFirmata.cpp:20:0: C:\Users\Max\Documents\Arduino\libraries\Firmata\utility\SerialFirmata.h:30:28: fatal error: SoftwareSerial.h: No such file or directory #include<SoftwareSerial.h> compliation terminated.
Look for the location of the Firmata folder to change in the error
log. For example, this error above indicates that the Firmata folder
to change is
Remove or rename this Firmata folder. Then call
arduino in MATLAB again.
If you still have the same issues, after trying these steps, contact MathWorks Technical Support.
To connect to your Arduino hardware using an HC-05 or HC-06 Bluetooth module, make sure you have Instrument Control Toolbox installed.
If the Test connection fails while you are setting up
Arduino hardware to use Bluetooth connection in the
arduinosetup interface, try
the following steps:
To ensure that testing connection did not fail intermittently, try to click the Test connection again.
If Test connection fails consistently, check that the Bluetooth device appears on the host computer and that it is paired correctly. If not, follow the instructions on Pair a Bluetooth Device and Retrieve the Bluetooth Device Address to pair your device.
If you are using HC-05 or HC-06, type
instrhwinfo('Bluetooth') in the MATLAB Command Window, and check that the Bluetooth device address appears on the
RemoteIDs properties of the object.
If you have configured your Arduino WiFi connection using
arduinosetup interface, and
Test connection fails, try the following steps:
Retrieve last configuration from Arduino
board in the
and obtain configuration information from the board.
If you are unable to retrieve the IP address from the board,
check whether your WiFi network is up and running. Restart and
reconfigure the connection using the
arduinosetup user interface in
MATLAB Command Window. Check that the WiFi connection
settings that you specify in the
arduinosetup are accurate.
Ping the IP address and check whether the address is reachable. To
ping the IP address, open a shell window on Windows or a terminal on Linux®/Mac and type,
ping followed by the IP
address of the device.
If the ping test fails, check whether your WiFi network is up
and running. Restart and reconfigure the connection using
arduinosetup in the MATLAB Command Window. Check that the WiFi connection
settings that you specify in
If you are using static IP address and if the ping test fails, make sure that the specified IP address is available and your network settings allow communication with that IP address.
If you are still experiencing Arduino hardware connection issues, contact MathWorks Technical Support.