transmitRepeat

Download waveform to radio and repeatedly transmit it over the air

Syntax

transmitRepeat(tx,data)

Description

example

transmitRepeat(tx,data) downloads the waveform signal, data, to the radio hardware associated by the transmitter System object™, tx, and transmits it repeatedly over the air. The waveform signal is downloaded into the radio hardware memory and transmitted over the air repeatedly, without gaps, until you release the transmitter by calling release(tx).

Examples

collapse all

Generate a waveform signal.

 fs = 2e6;
 sw = dsp.SineWave;
 sw.Amplitude = 0.5;
 sw.Frequency = 100e3;
 sw.ComplexOutput = true;
 sw.SampleRate = fs;
 sw.SamplesPerFrame = 5000;
 txWaveform = sw();  

Download the waveform signal to the radio and transmit it repeatedly transmit over the air.

 tx = sdrtx('Pluto');
 tx.CenterFrequency = 2.415e9;
 tx.BasebandSampleRate = fs;
 tx.Gain = -5;
 transmitRepeat(tx,txWaveform);

Stop repeated transmission by releasing the transmitter.

 release(tx);

Input Arguments

collapse all

Transmitter System object, specified as a comm.SDRTxPluto object. To create this object, use the sdrtx function.

Signal to transmit, specified as a column vector containing up to 16777216 complex samples.

These data types are valid for transmitted data:

  • double — Double-precision floating point with values scaled to the range of [–1,1].

  • single — Single-precision floating point with values scaled to the range of [–1,1].

  • int16 — 16-bit signed integers. The range of values is [-32768,32767], but the data transmitted by the ADALM-PLUTO radio loses the four LSBs of precision.

Note

The AD936X RF chip has a 12-bit DAC. Only the 12 most significant bits of the transmitted data are used. Values of magnitude less than 0.0625 are lost.

Note

PlutoSDR supports transmission on a single channel only. When you use transmitRepeat in single channel mode, the number of samples must be even.

Data Types: int16 | single | double
Complex Number Support: Yes

Introduced in R2017b