The guidelines in Overview of Creating a Model and Generating Executable for C2000 Processors describe how to create and build models for Texas Instruments™ C2000™ processors.
Compares data type support in Simulink® and Embedded Coder® models with that of TI C2000 DSPs
Summarizes the steps required to create models and generating executables for your target.
Overview of CLA Task and Subsystem, data exchange, interrupt generation and model configuration for CLA.
Provides information about TI C2000 scheduling
Sharing General Purpose Timer between C281x Peripherals
The LIN communications architecture supports a single master node and up to 16 slave nodes on a LIN network.
The C28x IQmath Library blocks perform processor-optimized fixed-point mathematical operations.
Provides an example of creating a model and targeting hardware
You can create a Code Composer Studio project from a model.
ADC blocks take a signal from an analog source and measure it with a digital device.
The bit rate of these four CAN blocks cannot be set directly:
|C281x eCAN Receive|
|C281x eCAN Transmit|
|C280x/C28x3x eCAN Receive|
|C280x/C28x3x eCAN Transmit|