If the SDRu Transmitter block is connected to USRP® hardware, the valid IP address appears in the USRP IP Address parameter in the block mask. You can also change the IP address.
Open model with an SDRu Transmitter or SDRu Receiver block.
To open the block mask, double-click the block.
Type a dotted quad IP address in the combo box.
If the SDRu Receiver or Transmitter System
object™ is connected to USRP® hardware, you can retrieve the valid IP address by querying the
ans = 192.168.10.2
You can change the IP address using the same property.
radio.IPAddress = '192.168.10.4'
radio = struct with fields: IPAddress: '192.168.10.4'
setsdruip sets the IP address of the
USRP® device at an IP address that you provide. The current IP address is replaced
with the new IP address.
For example, set the IP address of the USRP® radio at IP address 192.168.30.22 to 192.168.30.20 with the following command:
 USRP, USRP2, UHD, and Ettus Research are trademarks of National Instruments Corp.