Main Content

RFSoC IP Core Generation

IP core generation workflow to build and deploy RFSoC applications

The IP core generation workflow enables system designers to generate a reusable HDL IP core for supported Xilinx® RFSoC devices. SoC Blockset™ RFSoC reference designs enable you to use the IP core generation workflow when your system includes an external memory and I/O.

Use the SoC Template Builder tool generate a template model based on the selected reference design and a host I/O model for data streaming and AXI memory map access with Simulink®. Customize the model template to include your algorithm. Then, use the HDL Workflow Advisor (requires HDL Coder™) to generate a bitstream and program the board.

Topics

Configure RFSoC Design Using SoC Template Builder

This workflow customizes and designs an RFSoC model using the SoC Template Builder tool.

Generate RFSoC Design

This workflow generates an RFSoC system using the IP core generation workflow.

Set Up Clock and Sample Rates

Set up the clock between the RFSoC and the DUT and set sampling rates.

Blocks

AXI4-Stream IIO Write (HOST)Write arrays to DDR memory buffer of IP core device from simulation model
AXI4-Stream IIO Read (HOST)Read DDR memory buffer from IP core device into simulation model
AXI4-Register IIO Read (HOST)Read memory-mapped registers into simulation model
AXI4-Register IIO Write (HOST)Write data to memory-mapped registers from a simulation model
ADC To VectorConvert concatenated 16-bit ADC input samples to vector outputs
Vector To DACConvert vector inputs to concatenated 16-bit DAC output samples

Tools

SoC Template BuilderGenerate template model based on selected RFSoC reference design

Objects

soc.RFDataConverterConfigure the RF Data Converter on the RFSoC device from MATLAB

Featured Examples