This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

freeMeasurementLists

Remove all measurement lists from XCP channel

collapse all in page

Syntax

freeMeasurementLists(xcpch)

Description

example

freeMeasurementLists(xcpch) removes all configured measurement lists from the specified XCP channel.

Examples

collapse all

Create two data acquisition lists and remove them.

Create an object to parse an A2L file and connect that to an XCP channel.

a2lfile = xcpA2L('XCPSIM.a2l')
xcpch = xcpChannel(a2lfile, 'CAN', 'Vector', 'Virtual 1', 1);

Connect the channel to the slave module.

connect(xcpch)

Setup a data acquisition measurement list with the '10 ms' event and 'PMW' measurement.

createMeasurementList(xcpch, 'DAQ', '10 ms', {'BitSlice0','PWMFiltered','Triangle'})

Create another measurement list with the '100ms' event and 'PWMFiltered', and 'Triangle' measurements.

createMeasurementList(xcpch, 'DAQ', '100ms', {'PWMFiltered','Triangle'})

view details of the measurement lists.

viewMeasurementLists(xcpch)
DAQ List #1 using the "10 ms" event @ 0.010000 seconds and the following measurements:
   PWM

DAQ List #2 using the "100ms" event @ 0.100000 seconds and the following measurements:
   PWMFiltered
   Triangle

Free the measurement lists.

freeMeasurementLists(xcpch)

Input Arguments

collapse all

XCP channel, specified as an XCP channel object created using xcpChannel. The XCP channel object can then communicate with the specified slave module defined by the A2L file.

See Also

| | |

Introduced in R2013a

Vehicle Network Toolbox Documentation
Support

Try MATLAB, Simulink, and Other Products

Get trial now