To run a real-time application on a target computer, first configure your target computer with the required I/O modules and Ethernet ports. Physically connect it to the development computer with a TCP/IP Ethernet link. Configure the Simulink Real-Time target settings with Simulink Real-Time Explorer or MATLAB language. Finally, build and download the real-time application to the target computer.
|Target Settings Properties||Settings related to target computer|
|Interface for managing target computer|
|Configure target computer and real-time application for execution|
|Test Simulink Real-Time installation|
|Add target computer interface|
|Remove target computer interface|
|Set specific target computer as default target computer|
|Determine the minimum sample time at which a model can run|
|Display TET monitor|
|Get target computer environment settings|
|Diagnostic information to troubleshoot configuration issues|
|Return free space and total space on the drive, in bytes|
|Return information about PCI boards installed in target computer|
|Retrieve the log that the kernel writes to the target computer screen|
|Configure connection to target computer and real-time application for execution|
Start the Simulink Real-Time kernel on the target computer. Speedgoat target machines support network, DOS loader, and standalone mode boot methods.
Configuring and controlling Simulink Real-Time interactively and by writing scripts and programs.
Troubleshoot problems that you encounter while using the Simulink Real-Time product.