New toolboxes have just been added to my license. How do I install additional toolboxes into an existing installation of MATLAB?
The MATLAB installer is used to install all MathWorks products, including MATLAB, Simulink, and toolboxes.
To download the MATLAB installer, please follow the steps below:
N.B.: For releases older than R2014a, you need to download the installer executable and the installation files for each toolbox individually. For further instructions on manually downloading and installing pre-R2014a toolboxes, please see the following article: <http://www.mathworks.com/matlabcentral/answers/101074>
The MATLAB DVD contains MATLAB, Simulink, and all toolboxes. No download is required if you are installing from a DVD.
For instructions on using the MATLAB installer, please see the MATLAB documentation:
Before running the MATLAB installer to install an additional toolbox, please keep in mind:
If you have a concern about installing additional toolboxes that is not addressed here or would like assistance with performing the installation, please contact MathWorks support:
The answer by the MathWorks Support Team focusses on Toolboxes that are supplied and licensed by MathWorks. (Which also appeared to be the concern represented in the Original Post.)
There are also many third-party Toolboxes available — often freely — such as on MATLAB Central. There are key differences with these products:
1. Licensing is different.
2. AFAIK, they are not handled by the MATLAB installer or Licence Manager.
3. From statements on MATLAB Central and elsewhere online, it appears that third-party Toolboxes are typically not 'locked' to a specific version of MATLAB. Presumably this issue for the MathWorks's own proprietary Toolboxes is more of a licensing issue. (Of course, occasionally compatibility issues may arise when core MATLAB commands are deprecated or otherwise modified between release versions.)
4. (a) Typically, users are advised to copy the third-party Toolbox to a local folder of the user's choice, and then add that folder to the MATLAB path. See e.g. http://stackoverflow.com/questions/3389545/how-to-install-toolbox-for-matlab
(b) A newer feature packages the third-party Toolbox as a *.mltbx file. Example: http://www.mathworks.com/matlabcentral/fileexchange/41594-medical-image-processing-toolbox. These are pseudo-self installing. In a Windows environment, simply double-click this file after saving locally, and a MATLAB Toolbox installation GUI will pop up to handle the process. However, even after successful installation the third-party Toolbox is not listed when issuing the ver command. Rather, the third-party Toolboxes can be inspected (and uninstalled) from the Home menu by clicking the Add-Ons button (in the Resources group) and choosing Manage Custom Toolboxes. Behind the scenes, the third-party Toolbox files are extracted (by default) to %MATLABStartUpFolder%\Toolboxes ( cf. 'userpath' [] ), with a file 'toolboxFolders.txt' created that appears to list the relevant paths for installed third-party Toolboxes.
Could you please be a little more specific about the following point:
If you already have MATLAB installed and want to add 1 new toolbox, is it then possible to do this downloading only the new toolbox and installing it, or does one have to download MATLAB together with all the toolboxes already installed plus the new toolbox - and then install everything again.
That is, is there an incremental toolbox installation feature or do you always reinstall the entire installation.
The answer should reflect all versions, but I am specifically interested in R2013a. In addition, I have a DVD. Trying the normal installation procedure, I would have expected the installation program to return specifying which toolboxes that are already loaded and asking if I wanted to add or remove some. This does not seem to be the case. It looks like you reinstall everything you specify, so you have to rememebr to specify the toolboxes you already have installed.
We just purchased an extra toolbox for Matlab and want to deploy this to our workstations. Is there a way for a network admin to Deploy this toolbox to our workstations without remove/reinstall Matlab completely or redirecting the user to Mathworks.com
regards Henk Croijmans
It's an old thread, still thought to answer it.
Initiate the installation as normal, select only the check box corresponding the tool box you want to install. You can see "installed" against your already existing tool boxes and modules. Good luck
Can someone clarify if its necessary to download all the .zip files for the toolboxes to the local install DIR, or can the installer login with my creds and using the license pull all those via my proxied internet connection?
Because I am not seeing no toolboxes to install with that method.
I am however able to login with the same creds on mathworks.com and download all 3.9Gb of .zip files using that same license.
Is the internet install broken somehow?
I downloaded all 3.9Gb of the toolbox .zip files and verified via strace the linux installer is O_RDONLY opening them all yet failing to list them for installation. I was allowed to download them, yet the installer fails to list them for installation. This feels like the installer is not seeing the right license file. I will open a case with support.
Dear All, I would also have a question in connection with install new toolbox. I downloaded the weaclim toolbox. I would like use it. How I can install this toolbox?
I installed ml recently (after being forced to install a gui since the headless install procedure is hopeless) , now need to install a package. I hit ./install and get
Preparing installation files... Installing ... Finished
which doesn't allow installation of anything more...
random To use 'random', the following product must be licensed, installed, and enabled: Statistics and Machine Learning Toolbox
the above random commands and some funtions not working 2017b