Unable to compile model for Simulink real time

11 views (last 30 days)
I want to use the Simulink real time.
My Simulink model contains a C S-function file. Namely FAST_SFunc. The code like follows (1).
The S-function can be used for simulation, but when it is used for Simulink real time, an error is reported after clicking the "build model" button as follows (2).
The problem can be reproduced through the compressed package in the attachment. I'm r2018b and vs2017 15.0。
I don't have the corresponding TLC file. Is that the reason why I can't compile? Is there any good solution?
Thanks
(1) FAST_SFunc ↓
/*
* TEMPLATE File: sfuntmpl_gate_fortran.c
* TEMPLATE Copyright 1990-2013 The MathWorks, Inc.
*
* Modified by B. Jonkman, National Renewable Energy Laboratory
* for use with FAST v8
* 20-Jan-2015
*/
/*
* You must specify the S_FUNCTION_NAME as the name of your S-function
* (i.e. replace sfungate with the name of your S-function, which has
* to match the name of the final mex file, e.g., if the S_FUNCTION_NAME
* is my_sfuntmpl_gate_fortran, the mex filename will have to be
* my_sfuntmpl_gate_fortran.mexXXX where XXX is the 3 letter
* mex extension code for your platform).
*/
#define S_FUNCTION_LEVEL 2
#define S_FUNCTION_NAME FAST_SFunc
/*
* Need to include simstruc.h for the definition of the SimStruct and
* its associated macro definitions.
*/
#include "simstruc.h"
#include "mex.h" // for mexPutVariable
#include "matrix.h" // for mxCreateDoubleScalar
#include "FAST_Library.h"
#define PARAM_FILENAME 0
#define PARAM_TMAX 1
#define PARAM_ADDINPUTS 2
#define NUM_PARAM 3
// two DWork arrays:
#define WORKARY_OUTPUT 0
#define WORKARY_INPUT 1
static double dt = 0;
static double TMax = 0;
static int NumInputs = NumFixedInputs;
static int NumAddInputs = 0; // number of additional inputs
static int NumOutputs = 1;
static int ErrStat = 0;
static char ErrMsg[INTERFACE_STRING_LENGTH]; // make sure this is the same size as IntfStrLen in FAST_Library.f90
static char InputFileName[INTERFACE_STRING_LENGTH]; // make sure this is the same size as IntfStrLen in FAST_Library.f90
static int n_t_global = -2; // counter to determine which fixed-step simulation time we are at currently (start at -2 for initialization)
// function definitions
static int checkError(SimStruct *S);
static void mdlTerminate(SimStruct *S); // defined here so I can call it from checkError
static void getInputs(SimStruct *S, double *InputAry);
static void setOutputs(SimStruct *S, double *OutputAry);
/* Error handling
* --------------
*
* You should use the following technique to report errors encountered within
* an S-function:
*
* ssSetErrorStatus(S,"Error encountered due to ...");
* return;
*
* Note that the 2nd argument to ssSetErrorStatus must be persistent memory.
* It cannot be a local variable.
*/
static int
checkError(SimStruct *S){
if (ErrStat >= AbortErrLev){
ssPrintf("\n");
ssSetErrorStatus(S, ErrMsg);
mdlTerminate(S); // terminate on error (in case Simulink doesn't do so itself)
return 1;
}
else if (ErrStat >= ErrID_Warn){
ssPrintf("\n");
ssWarning(S, ErrMsg);
}
else if (ErrStat != ErrID_None){
ssPrintf("\n%s\n", ErrMsg);
}
return 0;
}
static void
getInputs(SimStruct *S, double *InputAry){
int k;
InputRealPtrsType uPtrs = ssGetInputPortRealSignalPtrs(S, 0);
for (k = 0; k < ssGetDWorkWidth(S, WORKARY_INPUT); k++) {
InputAry[k] = (double)(*uPtrs[k]);
}
}
static void
setOutputs(SimStruct *S, double *OutputAry){
int k;
double *y = ssGetOutputPortRealSignal(S, 0);
for (k = 0; k < ssGetOutputPortWidth(S, WORKARY_OUTPUT); k++) {
y[k] = OutputAry[k];
}
}
/*====================*
* S-function methods *
*====================*/
/* Function: mdlInitializeSizes ===============================================
* Abstract:
* The sizes information is used by Simulink to determine the S-function
* block's characteristics (number of inputs, outputs, states, etc.).
*/
static void mdlInitializeSizes(SimStruct *S)
{
int i = 0;
int j = 0;
int k = 0;
static char ChannelNames[CHANNEL_LENGTH * MAXIMUM_OUTPUTS + 1];
static double InitInputAry[MAXInitINPUTS];
//static char OutList[MAXIMUM_OUTPUTS][CHANNEL_LENGTH + 1];
static char OutList[CHANNEL_LENGTH + 1];
double *AdditionalInitInputs;
mxArray *pm, *chrAry;
mwSize m, n;
mwIndex indx;
if (n_t_global == -2) {
/* Expected S-Function Input Parameter(s) */
ssSetNumSFcnParams(S, NUM_PARAM); /* Number of expected parameters */
if (ssGetNumSFcnParams(S) != ssGetSFcnParamsCount(S)) {
/* Return if number of expected != number of actual parameters */
return;
}
// The parameters should not be changed during the course of a simulation
ssSetSFcnParamTunable(S, PARAM_FILENAME, SS_PRM_NOT_TUNABLE);
mxGetString(ssGetSFcnParam(S, PARAM_FILENAME), InputFileName, INTERFACE_STRING_LENGTH);
ssSetSFcnParamTunable(S, PARAM_TMAX, SS_PRM_NOT_TUNABLE);
TMax = mxGetScalar(ssGetSFcnParam(S, PARAM_TMAX));
ssSetSFcnParamTunable(S, PARAM_ADDINPUTS, SS_PRM_NOT_TUNABLE);
NumAddInputs = (int)(mxGetScalar(ssGetSFcnParam(S, PARAM_ADDINPUTS)) + 0.5); // add 0.5 for rounding from double
if (NumAddInputs < 0){
ErrStat = ErrID_Fatal;
strcpy(ErrMsg, "Parameter specifying number of additional inputs to the FAST SFunc must not be negative.\n");
checkError(S);
return;
}
NumInputs = NumFixedInputs + NumAddInputs;
// now see if there are other inputs that need to be processed...
if (NumAddInputs > 0){
k = (int)mxGetNumberOfElements(ssGetSFcnParam(S, PARAM_ADDINPUTS));
k = min( k , MAXInitINPUTS );
AdditionalInitInputs = (double *)mxGetData(ssGetSFcnParam(S, PARAM_ADDINPUTS));
for (i = 0; i < k; i++){
InitInputAry[i] = AdditionalInitInputs[i + 1];
}
}
else{
InitInputAry[0] = SensorType_None; // tell it not to use lidar (shouldn't be necessary, but we'll cover our bases)
}
// set this before possibility of error in Fortran library:
ssSetOptions(S,
SS_OPTION_CALL_TERMINATE_ON_EXIT);
/* --------------------------------------------- */
// strcpy(InputFileName, "../../CertTest/Test01.fst");
FAST_Sizes(&TMax, InitInputAry, InputFileName, &AbortErrLev, &NumOutputs, &dt, &ErrStat, ErrMsg, ChannelNames);
n_t_global = -1;
if (checkError(S)) return;
// set DT in the Matlab workspace (necessary for Simulink block solver options)
pm = mxCreateDoubleScalar(dt);
ErrStat = mexPutVariable("base", "DT", pm);
mxDestroyArray(pm);
if (ErrStat != 0){
ErrStat = ErrID_Fatal;
strcpy(ErrMsg, "Error copying string array to 'DT' variable in the base Matlab workspace.");
checkError(S);
return;
}
// put the names of the output channels in a cell-array variable called "OutList" in the base matlab workspace
m = NumOutputs;
n = 1;
pm = mxCreateCellMatrix(m, n);
for (i = 0; i < NumOutputs; i++){
j = CHANNEL_LENGTH - 1;
while (ChannelNames[i*CHANNEL_LENGTH + j] == ' '){
j--;
}
strncpy(&OutList[0], &ChannelNames[i*CHANNEL_LENGTH], j+1);
OutList[j + 1] = '\0';
chrAry = mxCreateString(OutList);
indx = i;
mxSetCell(pm, indx, chrAry);
//mxDestroyArray(chrAry);
}
ErrStat = mexPutVariable("base", "OutList", pm);
mxDestroyArray(pm);
if (ErrStat != 0){
ErrStat = ErrID_Fatal;
strcpy(ErrMsg, "Error copying string array to 'OutList' variable in the base Matlab workspace.");
checkError(S);
return;
}
// ---------------------------------------------
ssSetNumContStates(S, 0); /* how many continuous states? */
ssSetNumDiscStates(S, 0); /* how many discrete states?*/
/* sets input port characteristics */
if (!ssSetNumInputPorts(S, 1)) return;
ssSetInputPortWidth(S, 0, NumInputs); // width of first input port
/*
* Set direct feedthrough flag (1=yes, 0=no).
* A port has direct feedthrough if the input is used in either
* the mdlOutputs or mdlGetTimeOfNextVarHit functions.
*/
ssSetInputPortDirectFeedThrough(S, 0, 0); // no direct feedthrough because we're just putting everything in one update routine (acting like a discrete system)
if (!ssSetNumOutputPorts(S, 1)) return;
ssSetOutputPortWidth(S, 0, NumOutputs);
ssSetNumSampleTimes(S, 1); // -> setting this > 0 calls mdlInitializeSampleTimes()
/*
* If your Fortran code uses REAL for the state, input, and/or output
* datatypes, use these DWorks as work areas to downcast continuous
* states from double to REAL before calling your code. You could
* also put the work vectors in hard-coded local (stack) variables.
*
* For fixed step code, keep a copy of the variables to be output
* in a DWork vector so the mdlOutputs() function can provide output
* data when needed. You can use as many DWork vectors as you like
* for both input and output (or hard-code local variables).
*/
if(!ssSetNumDWork( S, 2)) return;
ssSetDWorkWidth( S, WORKARY_OUTPUT, ssGetOutputPortWidth(S, 0));
ssSetDWorkDataType(S, WORKARY_OUTPUT, SS_DOUBLE); /* use SS_DOUBLE if needed */
ssSetDWorkWidth( S, WORKARY_INPUT, ssGetInputPortWidth(S, 0));
ssSetDWorkDataType(S, WORKARY_INPUT, SS_DOUBLE);
ssSetNumNonsampledZCs(S, 0);
/* Specify the sim state compliance to be same as a built-in block */
/* see sfun_simstate.c for example of other possible settings */
ssSetSimStateCompliance(S, USE_DEFAULT_SIM_STATE);
// ssSetOptions(S, 0); // bjj: what does this do? (not sure what 0 means: no options?) set option to call Terminate earlier...
}
}
/* Function: mdlInitializeSampleTimes =========================================
* Abstract:
* This function is used to specify the sample time(s) for your
* S-function. You must register the same number of sample times as
* specified in ssSetNumSampleTimes.
*/
static void mdlInitializeSampleTimes(SimStruct *S)
{
/*
* If the Fortran code implicitly steps time
* at a fixed rate and you don't want to change
* the code, you need to use a discrete (fixed
* step) sample time, 1 second is chosen below.
*/
ssSetSampleTime(S, 0, dt); /* Choose the sample time here if discrete */
ssSetOffsetTime(S, 0, 0.0);
ssSetModelReferenceSampleTimeDefaultInheritance(S);
}
#undef MDL_INITIALIZE_CONDITIONS /* Change to #undef to remove function */
#define MDL_START /* Change to #undef to remove function */
#if defined(MDL_START)
/* Function: mdlStart =======================================================
* Abstract:
* This function is called once at start of model execution. If you
* have states that should be initialized once, this is the place
* to do it.
*/
static void mdlStart(SimStruct *S)
{
/* bjj: this is really the initial output; I'd really like to have the inputs from Simulink here.... maybe if we put it in mdlOutputs?
but then do we need to say we have direct feed-through?
*/
double *InputAry = (double *)ssGetDWork(S, WORKARY_INPUT); //malloc(NumInputs*sizeof(double));
double *OutputAry = (double *)ssGetDWork(S, WORKARY_OUTPUT);
//n_t_global is -1 here; maybe use this fact in mdlOutputs
if (n_t_global == -1){ // first time to compute outputs:
// getInputs(S, InputAry);
FAST_Start(&NumInputs, &NumOutputs, InputAry, OutputAry, &ErrStat, ErrMsg);
n_t_global = 0;
if (checkError(S)) return;
}
}
#endif /* MDL_START */
/* Function: mdlOutputs =======================================================
* Abstract:
* In this function, you compute the outputs of your S-function
* block. The default datatype for signals in Simulink is double,
* but you can use other intrinsic C datatypes or even custom
* datatypes if you wish. See Simulink document "Writing S-functions"
* for details on datatype topics.
*/
static void mdlOutputs(SimStruct *S, int_T tid)
{
/*
* For Fixed Step Code
* -------------------
* If the Fortran code implements discrete states (implicitly or
* registered with Simulink, it doesn't matter), call the code
* from mdlUpdates() and save the output values in a DWork vector.
* The variable step solver may call mdlOutputs() several
* times in between calls to mdlUpdate, and you must extract the
* values from the DWork vector and copy them to the block output
* variables.
*
* Be sure that the ssSetDWorkDataType(S,0) declaration in
* mdlInitializeSizes() uses SS_DOUBLE for the datatype when
* this code is active.
*/
double *InputAry = (double *)ssGetDWork(S, WORKARY_INPUT);
double *OutputAry = (double *)ssGetDWork(S, WORKARY_OUTPUT);
if (n_t_global == -1){ // first time to compute outputs:
getInputs(S, InputAry);
FAST_Start(&NumInputs, &NumOutputs, InputAry, OutputAry, &ErrStat, ErrMsg);
n_t_global = 0;
if (checkError(S)) return;
}
setOutputs(S, OutputAry);
}
#define MDL_UPDATE /* Change to #undef to remove function */
#if defined(MDL_UPDATE)
/* Function: mdlUpdate ======================================================
* Abstract:
* This function is called once for every major integration time step.
* Discrete states are typically updated here, but this function is useful
* for performing any tasks that should only take place once per
* integration step.
*/
static void mdlUpdate(SimStruct *S, int_T tid)
{
/*
* For Fixed Step Code Only
* ------------------------
* If your Fortran code runs at a fixed time step that advances
* each time you call it, it is best to call it here instead of
* in mdlOutputs(). The states in the Fortran code need not be
* continuous if you call your code from here.
*/
double *InputAry = (double *)ssGetDWork(S, WORKARY_INPUT);
double *OutputAry = (double *)ssGetDWork(S, WORKARY_OUTPUT);
//time_T t = ssGetSampleTime(S, 0);
getInputs(S, InputAry);
/* ==== Call the Fortran routine (args are pass-by-reference) */
FAST_Update(&NumInputs, &NumOutputs, InputAry, OutputAry, &ErrStat, ErrMsg);
n_t_global = n_t_global + 1;
if (checkError(S)) return;
setOutputs(S, OutputAry);
}
#endif /* MDL_UPDATE */
#undef MDL_DERIVATIVES /* Change to #undef to remove function */
/* Function: mdlTerminate =====================================================
* Abstract:
* In this function, you should perform any actions that are necessary
* at the termination of a simulation. For example, if memory was
* allocated in mdlStart, this is the place to free it.
*/
static void mdlTerminate(SimStruct *S)
{
if (n_t_global > -2){ // just in case we've never initialized, check this time step
FAST_End();
n_t_global = -2;
}
}
/*=============================*
* Required S-function trailer *
*=============================*/
#ifdef MATLAB_MEX_FILE /* Is this file being compiled as a MEX-file? */
#include "simulink.c" /* MEX-file interface mechanism */
#else
#include "cg_sfun.h" /* Code generation registration function */
#endif
(2)Error information ↓
LINK : fatal error LNK1104: 无法打开文件“FAST_SFunc.obj”
NMAKE : fatal error U1077: “"H:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Tools\MSVC\14.10.25017\bin\HostX86\x86\link.EXE"”: 返回代码“0x450”
Stop.
The make command returned an error of 2
'An_error_occurred_during_the_call_to_make' 不是内部或外部命令,也不是可运行的程序
或批处理文件。
### Creating HTML report file CFDLMFAC_codegen_rpt.html
b:\matlab\rtw\internal\rtwtags\rtwtags: error opening 'G:\A2_Doctor\1 FASTv8\Simulink\Samples\CFDL_MFAC_weifen_real_time\CFDLMFAC_slrt_rtw\FAST_SFunc.c'
  5 Comments

Sign in to comment.

Answers (0)

Categories

Find more on Simulink Coder in Help Center and File Exchange

Products


Release

R2018b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!