In this example, MATLAB® is used to wirelessly control an LED using two XBee® Series 2 modules. A mini photocell is used to wirelessly monitor the state of the LED. The example illustrates how you can control,acquire and analyze data from sensors that are connected wirelessly through XBee modules.
XBee is a registered trademark of Digi International, http://www.digi.com
I have an XBee THT Grove Development Board, and xbee s1. I'm trying to read out the analog and digital pin with Matlab already from few days.
I always get these error messages:
"No response from your remote node. Check the destination address or SIFS parameter if you want to increase the waiting
"Responses = obj.remoteAtCommand (command, destadd);"
"[CurPinMode, sources] = obj.getPinMode (pin, destadd);"
Can someone help me
Hello! Thank you very much for very useful file!
I want to get data from remote xbee, which is connected with arduino by RX TX, and how I understand I need use function output = extractFrameData(frameData, remoteATCommand), but I don't know Which remote AT Command I should use. I will appreciate for any help.
I'm trying to need throughput, delay and packet loss.
how can i do it. pleas help me.
i'm trying to send data from arduino to matlab using Xbee SERIES 1 802.15.4
how can i do it? and what matlab code should i use?
hi, im trying to use the plug for creating an Xbee object but Matlab does not recognise the command. is there any other package i need t install before being able to use this feature ?? please help.
>> x = xbee('COM6');
Error using xbee
Error: File: xbee.m Line: 4 Column: 5
Unexpected MATLAB expression.
i'm new to xbee programming
wonder to know what's difference for AT mode or API mode in matlab coding -- can you point me which code depends on API mode?
@Tim: This code was written specifically for the series 2 XBees running in API mode, so it will not work with series 1 XBees. However, if you have series 1 XBees (or series 2 XBees running in AT mode), you should be able to use the "serial" function/object directly without any special wrapper. Try:
>> doc serial
Regarding your keyboard: This is just a guess (I am not familiar with this aspect of Macs, but I am familiar with Linux, I'm guessing they are similar), but you are most likely providing the wrong address for the serial port. Instead of providing the address for the XBees, you are giving it the address for your keyboard. Try incrementing the number at the end of the serial port address until it works (with the "serial" command, it won't work with the "xbee" command).
Would Matlab R2013a be able to recognize the word 'xbee' or do I need a latest version of matlab?
I have two Xbees S1 and want to transmit sensor data to Matlab.
Does the xbee class also work with S1-series? Are there any known issues?
As soon as I create the Xbee object, my keyboard (OS X 10.10) stops working. Any ideas on that?
Updated description and file.
More Files in the Maker Community
Download apps, toolboxes, and other File Exchange content using Add-On Explorer in MATLAB.