image thumbnail

Buck Converter using inductor current control method

version 1.1.0.0 (27.2 KB) by Niranjan Bhujel
It steps down DC voltage.

622 Downloads

Updated 30 Mar 2017

View License

It steps down DC voltage from 70 V to 20 V. It measures the output voltage and compares with reference voltage. Their difference is passed to PI controller which gives current to be drawn to maintain output voltage to reference value. This calculated reference current is compared with actual inductor current. If actual inductor current is less than calculated reference current, then switchin mosfet S is turned on so that inductor current increases. If actual inductor current is greater than calculated reference current, then switchin mosfet S is turned off so that inductor current decreases. In this way, output voltage is regulated.

Cite As

Niranjan Bhujel (2021). Buck Converter using inductor current control method (https://www.mathworks.com/matlabcentral/fileexchange/62137-buck-converter-using-inductor-current-control-method), MATLAB Central File Exchange. Retrieved .

MATLAB Release Compatibility
Created with R2016b
Compatible with any release
Platform Compatibility
Windows macOS Linux
Communities

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!