I am an Application Support Engineer in Engineering Development Group at MathWorks, Hyderabad.

DISCLAIMER : Any advice or opinions here are my own, and in no way reflect that of MathWorks.

Answered

How to know which color represents which figure through the legend?

Legend displays the labels for each plot in the sequence in which they are plotted.

How to know which color represents which figure through the legend?

Legend displays the labels for each plot in the sequence in which they are plotted.

1 month ago | 0

Answered

sscfluids_house_heating_system

This example is available from the version R2016b. So, if you are using a previous version, you may have to upgrade the version ...

sscfluids_house_heating_system

This example is available from the version R2016b. So, if you are using a previous version, you may have to upgrade the version ...

1 month ago | 0

Answered

Download for install times out

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/95657-why-do-i-receive-a-timeout-error-when-...

Download for install times out

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/95657-why-do-i-receive-a-timeout-error-when-...

1 month ago | 0

Answered

How to set default font size in Matlab-published HTML?

When the HTML document is created with the PUBLISH function; it uses the 'mxdom2simplehtml.xsl' stylesheet. You can modify th...

How to set default font size in Matlab-published HTML?

When the HTML document is created with the PUBLISH function; it uses the 'mxdom2simplehtml.xsl' stylesheet. You can modify th...

1 month ago | 0

| accepted

Answered

9 node mesh generation

The line function can be used to draw the lines between the dots. for i = 0.25 : 0.25 : 0.75 line([i i],[0 1],'LineStyle'...

9 node mesh generation

The line function can be used to draw the lines between the dots. for i = 0.25 : 0.25 : 0.75 line([i i],[0 1],'LineStyle'...

1 month ago | 1

| accepted

Answered

Nonlinear system simulink - I am facing an error that there's division by zero error?!

You may refer the following answer to avoid the divide by zero error https://www.mathworks.com/matlabcentral/answers/93046-is-...

Nonlinear system simulink - I am facing an error that there's division by zero error?!

You may refer the following answer to avoid the divide by zero error https://www.mathworks.com/matlabcentral/answers/93046-is-...

4 months ago | 0

Answered

Why is the error RegSvr32 showing on running the smlink_linkinv while installing the simscape multibody plugin for Autodesk Inventor?

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/485915-why-do-i-get-an-error-regarding-cl_i...

Why is the error RegSvr32 showing on running the smlink_linkinv while installing the simscape multibody plugin for Autodesk Inventor?

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/485915-why-do-i-get-an-error-regarding-cl_i...

4 months ago | 0

Answered

Averaging scattered data in a 2D grid mesh

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/85122-averaging-and-locating-data-points-us...

Averaging scattered data in a 2D grid mesh

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/85122-averaging-and-locating-data-points-us...

4 months ago | 0

Answered

Running multiple simulations simultaneously

You may use parfor loop to execute the iterations parallelly. The documentation for parfor loop can be referred from the followi...

Running multiple simulations simultaneously

You may use parfor loop to execute the iterations parallelly. The documentation for parfor loop can be referred from the followi...

4 months ago | 0

| accepted

Answered

Confirm selection: Error 337: The information you provided could not be processed due to an issue with our systems. Please try again later

You may refer the following answer by MathWorks Support Team https://www.mathworks.com/matlabcentral/answers/93689-why-do-i-ge...

Confirm selection: Error 337: The information you provided could not be processed due to an issue with our systems. Please try again later

You may refer the following answer by MathWorks Support Team https://www.mathworks.com/matlabcentral/answers/93689-why-do-i-ge...

4 months ago | 0

Answered

Matlab Catalina wont open then says not responding but does not show up as running to force quit.. computer lags/restart.

Currently there is a bug which stops MATLAB License Manager Error message windows from appearing. To find what error is causing ...

Matlab Catalina wont open then says not responding but does not show up as running to force quit.. computer lags/restart.

Currently there is a bug which stops MATLAB License Manager Error message windows from appearing. To find what error is causing ...

4 months ago | 0

Answered

error using sym>convertChar (line1459)

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/444975-gptips-2-symbolic-regression-error?s...

error using sym>convertChar (line1459)

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/444975-gptips-2-symbolic-regression-error?s...

4 months ago | 0

Answered

StateFlow Onramp how to add?

You can access Stateflow Onramp from the following link https://matlabacademy.mathworks.com/

StateFlow Onramp how to add?

You can access Stateflow Onramp from the following link https://matlabacademy.mathworks.com/

4 months ago | 0

Answered

Query on spreadsheetimport options

You may use readcell function to read the excel sheet in the form of a cell array and assign the desired value from cell array t...

Query on spreadsheetimport options

You may use readcell function to read the excel sheet in the form of a cell array and assign the desired value from cell array t...

4 months ago | 0

Answered

Integration with pi - Rational Approximation?

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/437316-weird-behavior-regarding-pi-in-symbo...

Integration with pi - Rational Approximation?

You may refer the following answer https://www.mathworks.com/matlabcentral/answers/437316-weird-behavior-regarding-pi-in-symbo...

4 months ago | 0

| accepted

Answered

Remove chattering from signal

Refer the following example (Noisy Signal) to find the frequency components of desired signal https://www.mathworks.com/help/m...

Remove chattering from signal

Refer the following example (Noisy Signal) to find the frequency components of desired signal https://www.mathworks.com/help/m...

4 months ago | 0

Answered

Simulink Desktop Real-time external mode doesn't support real-time UDP communication block

You may refer the following answer to resolve the error https://www.mathworks.com/matlabcentral/answers/373551-how-to-resolve-...

Simulink Desktop Real-time external mode doesn't support real-time UDP communication block

You may refer the following answer to resolve the error https://www.mathworks.com/matlabcentral/answers/373551-how-to-resolve-...

4 months ago | 0

Answered

Why MATLAB does not support TAMIL language or Vedic Maths

You can refer the following documentation for the languages supported by MATLAB https://in.mathworks.com/help/textanalytics/la...

Why MATLAB does not support TAMIL language or Vedic Maths

You can refer the following documentation for the languages supported by MATLAB https://in.mathworks.com/help/textanalytics/la...

4 months ago | 0

Answered

Why d(i) is getting stored in a row vector? Shouldn't it be a single value rather than a vector!?

Hi, In the code, you have defined the variable d to be a vector d(i) which increases its size in each iteration of loop from 1...

Why d(i) is getting stored in a row vector? Shouldn't it be a single value rather than a vector!?

Hi, In the code, you have defined the variable d to be a vector d(i) which increases its size in each iteration of loop from 1...

4 months ago | 0

Answered

Your MATLAB license will expire in 5 days.Please contact your system administrator or MathWorks to renew this license?

You may refer the following answer for license expiration issue https://in.mathworks.com/matlabcentral/answers/100222-why-do-i...

Your MATLAB license will expire in 5 days.Please contact your system administrator or MathWorks to renew this license?

You may refer the following answer for license expiration issue https://in.mathworks.com/matlabcentral/answers/100222-why-do-i...

4 months ago | 0

Answered

Division of two vectors - mrdivide

C = A/B determines the matrix C such that: C*B = A You may also refer the following answer https://in.mathworks.com/matlabcen...

Division of two vectors - mrdivide

C = A/B determines the matrix C such that: C*B = A You may also refer the following answer https://in.mathworks.com/matlabcen...

4 months ago | 0

| accepted

Answered

Could not add the data

You can add the inputData to the fifth row of results by the following code. results(5,:)=inputData; However, this gives an e...

Could not add the data

You can add the inputData to the fifth row of results by the following code. results(5,:)=inputData; However, this gives an e...

6 months ago | 0

Answered

The application could not connect to MathWorks. For more information on resolving this issue, see this Support Article

You may refer the following answers https://in.mathworks.com/matlabcentral/answers/92634-why-do-i-get-a-connection-error-when-...

The application could not connect to MathWorks. For more information on resolving this issue, see this Support Article

You may refer the following answers https://in.mathworks.com/matlabcentral/answers/92634-why-do-i-get-a-connection-error-when-...

6 months ago | 1

| accepted

Answered

Generating Randomization from a text file

You can read the matrix from the text file, randomize the rows and rewrite it to the text file. For reading a matrix from text ...

Generating Randomization from a text file

You can read the matrix from the text file, randomize the rows and rewrite it to the text file. For reading a matrix from text ...

6 months ago | 1

| accepted

Answered

In App Designer, how can I refer to the controls in one GUI from another GUI?

You can refer the following answer https://in.mathworks.com/matlabcentral/answers/346480-how-to-control-the-apperance-of-a-ui-...

In App Designer, how can I refer to the controls in one GUI from another GUI?

You can refer the following answer https://in.mathworks.com/matlabcentral/answers/346480-how-to-control-the-apperance-of-a-ui-...

6 months ago | 0

Answered

Hello, I want to convert summation of below problem into matlab code

There is no need of summation in the expressions of S1, S2 and S3. Try using the following equations. S1=S1+[U(r,3)*U(r,3)]./[...

Hello, I want to convert summation of below problem into matlab code

There is no need of summation in the expressions of S1, S2 and S3. Try using the following equations. S1=S1+[U(r,3)*U(r,3)]./[...

6 months ago | 0

Answered

Confusion for licenses in our office

There is a separate team for license related issues. You can get more information by contacting support@mathworks.com Ho...

Confusion for licenses in our office

There is a separate team for license related issues. You can get more information by contacting support@mathworks.com Ho...

6 months ago | 0

Answered

How do I install Microsoft Windows SDK 7.1

You may refer the following link for installation https://in.mathworks.com/matlabcentral/answers/101105-how-do-i-install-micro...

How do I install Microsoft Windows SDK 7.1

You may refer the following link for installation https://in.mathworks.com/matlabcentral/answers/101105-how-do-i-install-micro...

6 months ago | 0

Answered

Inverse z-Transform

You are using syms function to create the functions x(n) and X(z). When you go through the documentation of syms function, you c...

Inverse z-Transform

You are using syms function to create the functions x(n) and X(z). When you go through the documentation of syms function, you c...

6 months ago | 0

| accepted

Answered

How do I save a GeoTIFF using an obsolete EPSG projection code?

The error may be because of using Coordinate Transformation Code for CoordRefSysCode parameter. According to the tips given in t...

How do I save a GeoTIFF using an obsolete EPSG projection code?

The error may be because of using Coordinate Transformation Code for CoordRefSysCode parameter. According to the tips given in t...

6 months ago | 0