Community Profile

photo

mahmoud saleh


19 total contributions since 2015

My research involves microgrid control and design, microgrids clustering, the impact of solar storms on the conventional grid, intermittency of renewable based MG, and integration of micro grids to New York electric power grid. Also I investigate the feasibility of smart grid implementations. Moreover I am involved in writing technical proposals.
My recent work is about interdependence between electrical power system and communication system in large scale applications. Further more I study the analogies between complex network and electrical power system grid to better understand and analyze it and it's interdependence with the communication system. I try to apply machine learning tools to investigate/ mitigate cascaded failure in the power system grids and study the vulnerabilities and critical spots in the conventional power grid alone and when the interdependence is realized.

Contact

mahmoud saleh's Badges

  • First Answer
  • 
  • Knowledgeable Level 1
  • 
  • Revival Level 3
  • 

View details...

Contributions in
View by

Answered
Electric Rail System Model
I do not have this model, but you can check this model and let me know if you have further question: https://www.mathworks.co...

3 months ago | 0

Answered
how Dc DC boost converter with PID can be achieved in simulink.
You might find some portion of the model you are asking for in the two models mentioned below, but off course you will have to a...

3 months ago | 0

Answered
How to design DCDC boost converter using simulink (Current mode control)
Check out those models: https://www.mathworks.com/matlabcentral/fileexchange/63330-current-controller-dc-dc-bidirectional-con...

3 months ago | 0

Answered
Boost Converter in Simulink
Check this model and compare: https://www.mathworks.com/matlabcentral/fileexchange/63949-voltage-control-dc-dc-boost-converte...

3 months ago | 0

Answered
Need help modeling a Buck/Boost Converter in Simulink/Simscape
Check out those two models for boost and bidirectional dc/dc converter. An explanation can be found in the Simulink model. Those...

3 months ago | 0

Answered
How to Parallel Boost converter to suply dc load
If the PIs are meant to fix the voltage across the 60 ohms resistance. Then, this is a droop control where the load is being sha...

3 months ago | 0

Answered
capacitor and inductor in boost converter
Basically, without them the output of the converter whether it is voltage or current will be square wave, on/ off. Most of loads...

3 months ago | 0

Answered
DC DC Converter with battery as a load
Hi, You need a boost converter to boost the voltage from (16-32V) to 60V, or you can use bidirectional converter, you can use...

3 months ago | 0

Answered
Current mode controlled DC DC boost converter?
Hi, Check this model and let me know if you have further question: https://www.mathworks.com/matlabcentral/fileexchange/63330...

3 months ago | 0

Answered
design of dc dc bidirectional charge controller for lead acid battery in simulink?
Hi, Check out this model: https://www.mathworks.com/matlabcentral/fileexchange/63791-voltage-control-dc-dc-bidirectional-conv...

3 months ago | 0

Answered
How will I simulate a circuit of Bidirectional DC-DC converter fed drive using MOSFETs for electric vehicle system ?
Hello, You can start by checking out this model: https://www.mathworks.com/matlabcentral/fileexchange/63791-voltage-control-dc-d...

3 months ago | 0

Answered
how to draw a simulation model of bidirectional converter??
Check out those two models: https://www.mathworks.com/matlabcentral/fileexchange/63330-current-controller-dc-dc-bidirectional...

3 months ago | 0

Answered
Boost converter in Simulink
This block is not compatible with the rest of the model. Check this model: https://www.mathworks.com/matlabcentral/fileexchan...

3 months ago | 0

Submitted


Voltage Control DC/DC Boost Converter
DC/DC Boost Converter can be used to maintain the DC bus voltage

3 months ago | 52 downloads |

Thumbnail

Submitted


DC traction system, Electrical train model
A DC traction system, 2 substations, with a train moving between 3 passenger stations were modeled

3 months ago | 17 downloads |

Thumbnail

Submitted


Current Controller DC/DC Bidirectional Converter
Current Controller DC/DC Bidirectional Converter Model with a detailed description

3 months ago | 105 downloads |

Thumbnail

Submitted


Voltage Control DC/DC Bidirectional Converter
Voltage Controlled DC/DC Bidirectional Converter, multiple Simulink version is uploaded

3 months ago | 94 downloads |

Thumbnail

Answered
Medium voltage distribution network Simulink model
Check this link: http://www.mathworks.com/matlabcentral/fileexchange/index?utf8=%E2%9C%93&term=ieee

2 years ago | 0

Answered
How can I modelize the IEEE 123 Node Feeder on Matlab/Simulink. please help me
Check this link: http://www.mathworks.com/matlabcentral/fileexchange/index?utf8=%E2%9C%93&term=ieee

2 years ago | 0

| accepted