Documentation

Radio Button

Select parameter value

  • Library:
  • Simulink / Dashboard

Description

The Radio Button block lets you change the value of the connected parameter during simulation. You can specify a list of values and labels and then select the value for the parameter from that list. Use the Radio Button block with other Dashboard blocks to build an interactive dashboard of controls and indicators for your model.

Double-clicking the Radio Button block does not open its dialog box during simulation and when the block is selected. To edit the block's parameters, you can use the Property Inspector, or you can right-click the block and select Block Parameters from the context menu.

Connection

Dashboard block controls connect to variables and block parameters. To connect a Dashboard block to a variable or parameter, use the Connection table in the block's parameters.

  1. Double-click the block.

  2. Populate the Connection table by selecting blocks of interest in your model.

  3. Mark the option button next to the parameter or variable you want to adjust during simulation.

  4. Click Apply.

Limitations

  • You cannot save the block connections or properties in model files that use the MDL format.

    To save connections and properties, save the model file in the SLX format.

  • Dashboard blocks can only connect to real scalar signals.

  • Dashboard blocks cannot connect to blocks that are commented out.

  • Dashboard blocks cannot connect to signals inside reference models.

  • Parameters specified by indexing a variable array do not appear in the Connection table. For example, a block parameter defined using the variable engine(1) does not appear in the table.

    To access the parameter in the Connection table, assign the indexed value to a scalar variable, such as engine_1. Then, use the scalar variable to define the block parameter.

Parameters

expand all

Select the block parameter to control using the Connection table. To open the dialog box, double-click the block. Then, populate the Connection table by selecting a block in your model. Select the variable parameter you want to control, and click Apply.

Note

To see workspace variables in the connection table, update the model diagram with Ctrl+D.

States

Values assigned to the connected parameter when you select the option with the corresponding Label. Click the + button to add options.

Label for each option. You can use the Label to display the value the connected parameter takes when the switch is positioned at the bottom, or you can enter a text label.

Example: Gain = 1

Name for the group of values displayed on the Radio Button block. Unlike the Block Name and Label, the Group Name always shows on the Radio Button block.

Example: Input Amplitude

Position of the block label. When the block is connected to a signal, the label is the name of the connected signal. When the block is not connected, the label is the instructional text.

Introduced in R2017b

Was this topic helpful?