File Exchange

image thumbnail

Wind Turbine Model

version 2.2 (18 MB) by

Wind turbine model including blades, nacelle, pitch and yaw actuation, generator and control system.

4.71429
68 Ratings

214 Downloads

Updated

View License

This file contains a wind turbine model. It includes a three-dimensional mechanical model of the tower, nacelle, and blades modeled in Simscape Multibody, hydraulic pitch actuators, electrical yaw actuators, a simple generator and electrical grid model. Supporting models show how to develop each of the systems separately and integrate them into the overall model. The level of fidelity for each subsystem can be varied as you work through the design.
Please read the README.txt file to get started.
Learn about this model in a four-part webinar series:
https://www.mathworks.com/videos/series/developing-wind-power-systems-using-matlab-and-simulink-95153.html
Request a trial to get the products needed to simulate this example:
https://www.mathworks.com/programs/trials/trial_request.html?s_cid=cta_trials&prodcode=SS,MS,LD,SH,SN,PS,ML,SL,SF

Find other Simscape examples by searching posts for the keyword "physical modeling"
https://www.mathworks.com/matlabcentral/fileexchange/?term=%22physical+modeling%22

Learn more about MathWorks Simscape Products:
https://www.mathworks.com/physical-modeling/

You may reuse this content, with or without modification, in your work.
Please follow the conditions of the license file and use the following citation:
[1] Miller, Steve (2017), Wind Turbine Model (https://www.mathworks.com/matlabcentral/fileexchange/25752) MATLAB Central File Exchange. Retrieved on <date you downloaded submission>

Comments and Ratings (138)

Yuan Zhang

David Esteban

David Esteban

Hello, Mr.Miller, my name is David Albaban, I am a student of engineering, please could you send me the model , I am working in a renewable energy
my student-email is: dealbadanm@correo.udistrital.edu.co

myron kwok

myron kwok

cheng luo

Hello,Mr.Miller! I am designing a relative model of DFIG,could you send me your model , I need it for reference.
Best redards!!
luocheng my email 940091522@qq.com

Hello Mr.Miller! I like your work, can you send the model to me, i am working on project for the my diploma project, i study in automation and control.
Best regards!!!
Maydan Zhambyl. zhambyl94@gmail.com

bing liu

i need R2012b version, to me, thank you
my email robin_1214@yahoo.com

Bingyan Yang

Hello Mr.Miller i apprciate your work, can you send the model to me, iam working on project for the uni, i study elctro engineering.

best regards

7214214@qq.com

Hello Mr.Miller i apprciate your work, can you send the model to me, iam working on project for the uni, i study elctro engineering.

best regards

Abdalhay Hijazi

kerimay sari


Hi Mr.Miller thank you for your big job. Can you send it to me, i'd like to work with your windturbine model. It just for me project. I'm a electric engineering student. Best regards. Email for send: kerim.3@hotmail.com Thank's!

kerimay sari

Merhaba MR.Miller bu dosyayı hotmailime gönderebilirmisiniz. bu alanda proje ödevim için yardımcı olacak. e-posta :kerim.3@hotmail.com
teşekkür ederim

Hi Mr.Miller thank you for your big job. Can you send it to me, i'd like to work with your windturbine model. It just for me project. I'm a electric engineering student. Best regards. Email for send: m.aydeniz43@gmail.com Thank's!

Hi Mr.Miller
thank you for your big job. Can you send it to me, i'd like to work with your windturbine model. It just for me study. I'm a control system student and it'l be interessting to create some controllers.
Best regards.

Email for send: ndobrov1992@gmail.com

Thank's!

moaz teleb

Hi MR.Miller
thank you for this great effort.
I need this model in my study, can you send it to me.
thanks in advance.

moaz.teleb@gmail.com

Yuewu

Yuewu (view profile)

Rajaa Hussein

HAFSI Oussama

Hi Mr miller. thank you for your matlab simulation wind turbine.
can you send to me this file, i need it in my study.
thank's in advence
my mail: oussama5bm@gmail.com

sir, kindly send me matlab simulation wind turbine. it's very urgent
thanks

mail id: chayan.bhatnagar1702@gmail.com

han yapeng

Hi,
I am new to simulink model. When i try to run the code. It show me the following error.

Help me solve it!

Failed to load library 'sdl_lib' referenced by 'Wind_Turbine/Nacelle/Geartrain/Ideal/Brakes/Disk Friction Clutch'

Thanks a lot in advance

Hello Mr. Miller
Thank you very much for upload the wind turbine model. Your work is very useful and interesting.
I am working in my final master project which is about developing and optimizing a pitch controller using fuzzy logic algorithms compared to a normal PI controller. I would like to know if you have worked in some model with these control methods. Any kind of help and advice will be very useful and appreciated. danielcermeno90@gmail.com

Maurel

Maurel (view profile)

Hi Steve, thanks for the model.You're work is really helpful for me. I'm trying to simulate your model using some wind speed dataset (speed and angle) coming from my measures. I would like to know how to change the wind speed and it's direction in the "Turbine Input" bloc.
Someone help pls!
Thanks

Steve Miller

Steve Miller (view profile)

@abdelhali - my startup_Wind_Turbine script is using the '\' character to separate levels of subdirectories, and it appears your operating System is expecting '/'. Fix that and it should run.

@Rakesh - I believe you Need to Change line 223 of Wind_Turbine_Parameters to

WT_Params.Generator.Breakers.cp = 1e9;

@Mostafa -- the model supplied here is free of charge, but you will Need the required products to run it. Students get it at a good Price, and there is a Home Version as well.

Thanks for all the interest -- sorry I can't answer every question right away.
--Steve

Can i buy this model to unlock it's library?

Hi Steve, thanks for the model. I am doing Simulink Desktop realtime for your Wind Turbine model and it is throwing an error "Simulink Coder Error:Nonfinite value in the structure parameter is not supported". Please help me out with the solution

Please I don't understand these messages because a i have every libraries in my folder but i can't resolve the problem. Help me it's very urgent.

Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 4)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Blades
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 5)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Brakes
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 6)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Environment
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 7)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Geartrain
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 8)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Generator
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 9)
Warning: Name is nonexistent or not a directory:
/Users/abdelfan/Abdelhali/Master2EnR\Libraries\Main_Controller
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 10)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Nacelle
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 11)
Warning: Name is nonexistent or not a directory:
/Users/abdelfan/Abdelhali/Master2EnR\Libraries\Pitch_Actuation
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 12)
Warning: Name is nonexistent or not a directory:
/Users/abdelfan/Abdelhali/Master2EnR\Libraries\Pitch_Controller
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 13)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Tower
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 14)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Yaw_Actuation
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 15)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Libraries\Yaw_Controller
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 16)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Scripts
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 17)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Scripts\Slide_Prep
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 18)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Reports
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 19)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Images
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 20)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\Images\Nacelle
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 21)
Warning: Name is nonexistent or not a directory: /Users/abdelfan/Abdelhali/Master2EnR\PCT
> In path (line 109)
In addpath (line 88)
In startup_Wind_Turbine (line 22)
Error using cd
Cannot CD to Libraries/Environment (Name is nonexistent or not a directory).

I will be thankful for you if you can help me
i need the equations of pitch control part and if you have the paper of this system

M.Ali@eng.svu.edu.eg
darwichiu44@gmail.com

Did anyone manage to get any of this model working at all? Would appreciate a reply urgently.

Louisbrasington@gmail.com

excellent work Mr steve miller
@Steve Miller, i a technical student working on Green energy technologies, as apart of my final year project i need to simulate a vertical axis wind turbine. I made the simscape model by exporting with the help of a CAD software(soliworks). but I didn't understand how to ceate an effect of wind on the turbine blades. For my project i have to show the variation in
1) RPM,
2) angular velocity,
3) if any viberation on the body, then its variation
4)the velocity at which the turbine starts rotation and the minimum velocity at which the turbine stop rotation.

https://drive.google.com/open?id=0BwW2lrATbxgJOW11SHY2TjBZNk0

here is the link to the model i made, please help me to finish my project.

anuj Palariya

sir, kindly send me matlab simulation wind turbine.
thanks

anuj palariya
anujpalariya93@gmail.com

mohamed fekry

Mr. Miller
in (wind_lib\Segments)
Why do not you use the flapping bending moment calculated from port M directly instead of decomposing the moment of port N?
Note that:
I think that you calculated the bending moment of block (Lift and Drag) as calculated in port M of block (Segments)

Hi everyone, can someone help me ? How can i upgrade some blocks like the "wind" block in Matlab 2014a ?Thank you

omid rahmani

Hi Steve

I'm working on my master project and I need to make a simulator like this.

for this, I want to change your generator with a DFIG one.
can I do this for my work??
can I change a subsystem to what I want?like generator or Gear Box??

my Email:
omidrahmani533@yahoo.com

thank you for your help
Regards

hello

I'm working on my master project and I need to make a simulator like this.

for this, I want to change your generator with a DFIG one.
can I do this for my work??
can I change a subsystem to what I want?like generator or Gear Box??

my Email:
mhm_mdn@yahoo.com

thank you for your help
Regards

please could you tell how to get this model working...I have matlab 2013a and I have downloaded the simulation files.... but for some reason and error it never runs the simulation for any of the processes I try to run. please help. its urgent. mail me the directions on ruchisodwadia@outlook.com. Please I really need help. Thank you :

Mitra

Mitra (view profile)

i am stuck in coding the non linear state space model of a wind turbine in m-file to do simple simulation...can anyone help me ? could you please email me at myacex@gmail.com

ahmed tarek

in your design Mr.miller designing wtig(fixed speed) 9 mw as 6*1.5 mw insted of one machine ...why?

ahmed tarek

i'm traying to design a wtig(fixed speed) in large scale (giga watt range)but i can't ... so i need any help to compelet my design

please send me the complete repot of blade design with all mathmatical equations.
eng.sajjad77@gmail.com.....i shall be thanfull to you...

tiniie kodak

thanks a lot for this mr miller, please i need the model for a small wind turbine rated 3kw. please can you upload the .m and .mdl file? I'll really appreciate you for this. please time is of the essence. my email is tinieet414@gmail.com

Dear Friends,

I am running this file and get an error. I am using matlab 2011. could you please advise me how I can run it or if you have another model do email me at vickessy@gmail.com

hun

hun (view profile)

Awesome!

amirsohail

Raed Ibrahim

great job

STUDENT

Hi, anybody know about DFIG with FAST&TURBSIM IN SIMULINK operation,,, pls mail related matlab operations, ranjith957@gmail.com

Elham Tofighi

Hi Steve,
Is there any citation link to this sample?
How can I refer to this sample in my work?

nice working..

Dimitrios

Great job!

Motaz Amer

if you please i want a m.file to calculate the output power of wind turbine and PV by only giving them the rated power of each and wind speed for the turbine and temperature and sun radiance for PV. please send it to me on motaz.amer@gmail.com

Swanil

Swanil (view profile)

Sepideh

Preety

Preety (view profile)

Can anyone please help me in designing a system in Simulink for pitch control with blade load only? I am not considering the power part but only the loading. I want to test the system under static and dynamic conditions but I am not familiar with the equations to use. I am also not considering the yaw mechanism. It is a simple design but I still need help with the mathematical modelling.

Stevenson

Hi Steve,

Thank you for your work! However, I have a problem. I have a 64 bits Matlab. When I run your model, it gives an error. How can I resolve this problem. This is the message:
The MATLAB C and Fortran API has changed to support MATLAB
variables with more than 2^32-1 elements. In the near future
you will be required to update your code to utilize the new
API. You can find more information about this at:
http://www.mathworks.com/support/solutions/data/1-5C27B9.html?solution=1-5C27B9
Building with the -largeArrayDims option enables the new API.

SONG

SONG (view profile)

Is there any manual to deal with this model?
I am struggling to follow the video, but it's not easy. And html link is not working. Any guys have idea for this?

SONG

SONG (view profile)

mah lat

ximing

ximing (view profile)

I want to create some fault cases of the subsystem to see how it responds and therefore have some question: is there any way to change certain parameter during the simulation? For instance, simulation time is 80, I want to replace the leakage area of 4-way directional valve in hydraulic pitch system with another value at 40 second. Is it theoretical doable?

Pascal

Pascal (view profile)

I just finished the settings and got it behaving well with matlab R2013a. Hope this helps mac OS 10.9 users. Instal Xcode 5.0.2,
1. As presented on http://www.mathworks.com/matlabcentral/answers/103904 , run the following commands on matlab R2013a command window:

cd(matlabroot)

cd bin

edit mexopts.sh

2. Save a backup copy of this file somewhere in case you make a mistake and you need to revert your changes.

3. Scroll down to the Mac (“maci64”) section of this file, beginning around line 120.

4. Replace all instances of 10.7 with 10.8; there are four of these in all (a fifth may be found in comments only)

5. Save the file, then execute the following command in the MATLAB Command Window:

mex -setup

6. Change the matlab current work directory to the equivalent unzipped folder for matlab R2013a.

7. open the file “startup_Wind_Turbine” and change all the "\" by "/"

8. Save "keep a backup of the original "startup_Wind_Turbine" if you have deleted the original zip file"

9. Follow the instructions in the README.txt file and you will have it all done.

Hope it helps

Pascal

Pascal (view profile)

Simone

Simone (view profile)

I'm trying to do exactly the same thing, but I have some problem to convert the values ​​of Voltage and Current from phasor mode to continuous-time mode.

Any suggestion is appreciated.

Simone

Simone (view profile)

Faisal

Faisal (view profile)

Can any one help me to design a wind turbine connected with a grid

Alexandar

sir i need wind and solar model in mdl file format.plz send to my mail id
alexandarbeski001@gmail.com

how can design wind model with intergated to grid in 3d visulation

please give suggestion and if yu have file so send me my mail gauravusic09@gmail.com

Johan Risandi

HI Steve,
is it possible to modify the wind density? If so, it sounds work well for ocean current also

KOYUM bakare

am final year undergraduate student,pls I need a model for 1kw .my email is bayo0502@yahoo.com .tnks

edgar george

es greath :3

MohammadReza

@Sepideh: Yes, of course I did, It has successfully done miss Sepideh and I'll defend my work less than one week later... (my first comment that didn't show up) ;)

MohammadReza

@Sepideh: by the way, I'll glad to help you to solve your problem

Sepideh

Thank you, this project is really useful.
@MohammadReza: Did you solve your problem? You know, My project is designing pitch controller for wind turbine by robust fuzzy controller method as well.

Sepideh

Sepideh

priyanka

rose@mohammed reza:When i run start up im getting c failto load mex....how to solve this.Thanks in advance

priyanka

@mohammed reza:This is Priyanka,im pursuing Btech final year.My project involves simulating the physical model of a wind turbine which is in our college.
What coulld be the procedure to simulate each and every component of a wind turbine ,as im new to simulink.Kindly help me out to solve this.
email id:deepti_1301@yahoo.in

priyanka

@steve miller:This is Priyanka,im pursuing Btech final year.My project involves simulating the physical model of a wind turbine which is in our college.
What coulld be the procedure to simulate each and every component of a wind turbine ,as im new to simulink.Kindly help me out to solve this.
email id:deepti_1301@yahoo.in

MohammadReza

@priyanka: Simply you need to run Startup file to initiate default values and load libraries. by the way there is no simulation of this project for MATLAB 2010a it is just for 2009b, 2011a, 2012a & 2012b. You may need to install different version of MATLAB.

priyanka

@mohammed reza:i am having problem when i run the Startup_Wind_Turbine.m file. it is unable to compile. When I run the .mdl file directly it open up the complete model but when i simulate it, it gives some error: Failed to find library 'Wind_Lib' referenced by 'Wind_Turbine/Blade Load'. This library must be on your MATLAB path.

But this error is solved when I added path in MATLAB. Now when I run the simulation in simulink I get error:
"Expression WT_Params.Main_Controller.wind_speed_cut_in_lower' for initial value of data 'wind_speed_cut_in_lower' (#66) did not evaluate."

MohammadReza

@Steve Miller: or How can I force turbine to work only in Generating State...

MohammadReza

@Steve Miller: I think my last comment didn't pop up, I already managed to replace pitch controller with my fuzzy controller in Pitch Controller block, but there is a problem with Turbine State Machine in Main Controller block. when wind speed gets more than 25rpm, the turbine goes to brake state. my fuzzy controller handle these state automatically. I already changed input value for wind speed to solve this but I know it's just a temporary solution! How can I bypass Main Controller section or change the default values for turbine_speed_cut_in, wind_speed_cut_in_upper and wind_speed_cut_in_lower? Thanks...

MohammadReza

@Steve Miller: In a simple word, I need turbine works only in Generating State...

bab zagro

very good

Steve Miller

Steve Miller (view profile)

@MohammadReza -- concerning the negative power, this model does not have any logic to control when the generator is connected to the grid. As a result, there is a significant transient when we simply close the breaker when the turbine is near the appropriate speed. The unexpected sign is because the generator is actually driven by the grid for a short period of time.

priyanka

@mohammedreza:I ve already installed matlab R2010a,initially i tried to run startup..but im getting error .
.Kindly help me to solve this

MohammadReza

@priyanka: Can you specify the error details?

priyanka

I ve matlab R2010a,im not able to run this model.Kindly help me to solve this

MohammadReza

Another question, If I'm right We have a simulation for 2MW wind turbine but the y axis of output power diagram in Generator Scope have some value between -0.3639 and -0.3635 and power values are in this range! I'm confused...

MohammadReza

By the way, I sent you an email with the subject "Some help please..." two weeks ago, I'll appreciate if you take a look on that...

MohammadReza

Thank you, That's great...

Steve Miller

Steve Miller (view profile)

@MohammadReza -- when you first open the model it is configured to run with only the mechanical load from the generator and omits the electrical system. To include the electrical power generation, you need to go into the Nacelle subsystem, right-click on the Generator Block, and select "Block Choice" / "Full". Then you will see output on the Power Scope.

MohammadReza

Hi every body, I got a question, How can I see output generator power (P(W)) in this model? I found that there is a power variable in Generator Scopes but the Power diagram shows only zero value! what is the problem in this model?

Muhammad

Can anybody send me a control wind turbine system by using braking system . . . .I need urgent .. .please send me on m.awais29@hotmail.com ....

thank you very much

Elisa

Elisa (view profile)

tushar garg

i waana help in simulation of micro wind power generator with battery energy storage for critical load....

ahmed mohamed

very good work

JOLIA

JOLIA (view profile)

I successfully run the model and review webinars and it is very very usefull and it is really great work...
But I really interested in Yaw control than Pitch control so if you can send me the yaw controller_testering it will be a really great thing.
As I try to change in model yaw control system but it is not available to edit in a subsystem....
mail: life87_06@yahoo.com
mail: hanan_elhosary@gmail.com
thanks in advance

Taiwo Odumosu

please does anybody have the model for a 1kw wind turbine?

COSKUN TUNCER

Taiwo Odumosu

thanks a lot for this mr miller, please i need the model for a small wind turbine rated 1kw. please can you upload the .m and .mdl file? I'll really appreciate you for this. please time is of the essence. my email is odumosutaiwo@gmail.com

Steve Miller

Steve Miller (view profile)

Ashish -- you need SimDriveline to run this model. Make sure you are using the right MATLAB release. Before R2011a, use the R2009b version, after R2011a use the R2011a version.

Ashish

Ashish (view profile)

Getting Error

Unable to open file for reading: "sdl_lib.mdl".

Ashish

Ashish (view profile)

Hi,

I'm NEW to Matlab, & i'm trying to run this model, but while executing "startup_Wind_Turbine.m" file, i'm receiving the error

1. "Failed to load library 'Wind_Lib' referenced by 'Wind_Turbine/Blade Load" &

2. "Unable to open file for reading: "Wind_Lib.mdl"."

Kindly Help.

Thanks in Advance
Ashish
homepageforu@yahoo.com
http://homepageforu.webs.com/

mars

mars (view profile)

excellent work thank you

Akash

Akash (view profile)

can anyone please help me regarding this project. whenver i run the model error msz is displayed..
i have urgent need for it.. i shall be really grtful .. my id is akash_singh209@yahoo.co.in

ehs

ehs (view profile)

amroune

excellent work thank you

Shivaram

yang shaohui

good things

While running the startup_wind_turbine.m, it make an error while generating the model because of the Compiler.. how can I solve it?

Lukasz

Lukasz (view profile)

excellent work!!!

Mohd Mohd

Tiago:
hye..can u help me??
i have a problem too run this model..
can u send to me the model without error??hope u can sent to mohdazuanbasri@yahoo.com

Tiago

Tiago (view profile)

Hi again,
Gorget the previous problem, i have already solve it.

Tiago

Tiago (view profile)

Hi!
I'm having trouble running the application on a windows 7, 64 bits, PC.
The only file available is "Wind_Turbine_sfun.mexw32", and I am not sure if I have all the files required to compile the .mexw64 file. Could you send this file?
The simulink main file is crashing with the error "Unable to locate 'mexopts.bat', and therefore cannot determine which compiler to use for simulation builds. Use 'mex -setup' to select a supported compiler.". I am currently trying to install a compiler.
Thank you for your help.

Steve Miller

Steve Miller (view profile)

If you are having trouble running the model, please remember to run startup_Wind_Turbine.m first. Many of the errors you are getting are because you are opening the model directly. Errors concerning "wind_lib" will be solved if you run startup_Wind_Turbine.m Read the README.txt file for more information. Enjoy, --Steve

teddy mi

pls say something

teddy mi

hi Steve Miller

i appreciate your "Wind Turbine Model"
and i have a problem when i start simulation of this model
its error massage says
1) failed to find library 'wind_lib' refranced by 'wind_turbine/blade load' this liberary must be in your MATLAB path
2)failed to find library 'wind_lib' 'wind_turbine/blade load/ lift and drag' this library must be in your MATLAB path

please send me by by including those library's email teddymec2@yahoo.com

Dear sir,
i am working on turbine control project using Lidar technology , and i downloaded this model to perform my control algorithm for individual pitch control on the turbine.
i have some questions which i hope to find answers for it:
1- when i run the model without adding the generator the model works good and when i add it errors occur in the following part
wind_turbine/nacelle/generator/full/asynchronus machine pu units/ electrical model/phasor/positive sequence model

and
wind_turbine/nacelle/generator/full/asynchronus machine pu units/ electrical model/phasor/positive sequence model/mux 3.

and the problems is in the dimensions

what should i do to solve this problem

2- is it possible to replace the controller for yaw motor and pitch angles with another controller which i am working at and also the generator used

Dear Sir,
I have a problem sending the brakes requirement from the word file. The error message is (Could not locate id "GIDa_28459038_8e2a_4012_b92b_873919de293f" in the model "Wind_Turbine")
Please send me on my email id (a.hemeida@live.com)

Xin

Xin (view profile)

good

excellent

Avinash kumar

sir,I am Avinash kumar persuing B.Tech in electrical engg.
I want to run this project,but after a lot of effort I couldn't able to know how can i add its path in mat lab, how can i run this model & also how can i remove its error.
If possible then please send me its complete model file that i can run on my pc.
please send me on my email id
(imcoolavinash.kumar@gmail.com)
Regards
Avinash kumar

Great Work!!
i am having problem when i run the Startup_Wind_Turbine.m file. it is unable to compile. When I run the .mdl file directly it open up the complete model but when i simulate it, it gives some error: Failed to find library 'Wind_Lib' referenced by 'Wind_Turbine/Blade Load'. This library must be on your MATLAB path.

But this error is soleved when I added path in MATLAB. Now when I run the simulation in simulink I get error:
"Expression WT_Params.Main_Controller.wind_speed_cut_in_lower' for initial value of data 'wind_speed_cut_in_lower' (#66) did not evaluate."

It is really a great job.

muk

muk (view profile)

Jun

Jun (view profile)

Arpriya

Climber ?

mohammad

excellent work Mr steve miller i hope that you publish more

Updates

2.2

Added R2017a version and text for citing submission in other works. Made startup file compatible with Mac.

2.1

Added R2016b version.

2.0.0.1

Updated license

2.0

Added R2016a and R2015b versions. Now uses variant subsystems with hyperlinks to control the configuration. Run time parameter example added.

1.8

Zip file updated with R2013a version. Also includes versions for R2012b, R2012a, R2011a, and R2009b.

1.7

Added R2012b version using SimMechanics Second Generation Technology. An R2012a version using SimMechanics First Generation Technology has also been added.

1.5

Updated for R2011a. Uses new Simscape-based SimDriveline library. R2009b version of the model is still included in the zip file.

1.2

Updated zip file with new HTML report from Simulink Report Generator.

1.1

Fixed description.

MATLAB Release
MATLAB 9.2 (R2017a)

Download apps, toolboxes, and other File Exchange content using Add-On Explorer in MATLAB.

» Watch video

Wind_Turbine_Model_R12b/Libraries/Blades/Flex_Blades/Scripts/

Wind_Turbine_Model_R12b/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R12b/Libraries/Generator/

Wind_Turbine_Model_R12b/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R12b/Local_Solver/Pitch_System/

Wind_Turbine_Model_R12b/PCT/

Wind_Turbine_Model_R12b/Scripts/

Wind_Turbine_Model_R12b/Scripts/Slide_Prep/

Wind_Turbine_Model_R12b/

Wind_Turbine_Model_R13a/Libraries/Blades/Flex_Blades/Scripts/

Wind_Turbine_Model_R13a/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R13a/Libraries/Generator/

Wind_Turbine_Model_R13a/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R13a/Local_Solver/Pitch_System/

Wind_Turbine_Model_R13a/PCT/

Wind_Turbine_Model_R13a/Scripts/

Wind_Turbine_Model_R13a/Scripts/Slide_Prep/

Wind_Turbine_Model_R13a/

Wind_Turbine_Model_R15b/Libraries/Blades/Flex_Blades/Scripts/

Wind_Turbine_Model_R15b/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R15b/Libraries/Generator/

Wind_Turbine_Model_R15b/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R15b/Local_Solver/Pitch_System/

Wind_Turbine_Model_R15b/PCT/

Wind_Turbine_Model_R15b/RSIM/

Wind_Turbine_Model_R15b/Scripts/

Wind_Turbine_Model_R15b/Scripts/Slide_Prep/

Wind_Turbine_Model_R15b/

Wind_Turbine_Model_R16a/Libraries/Blades/Flex_Blades/Scripts/

Wind_Turbine_Model_R16a/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R16a/Libraries/Generator/

Wind_Turbine_Model_R16a/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R16a/Libraries/Pitch_Controller/

Wind_Turbine_Model_R16a/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R16a/Local_Solver/Pitch_System/

Wind_Turbine_Model_R16a/PCT/

Wind_Turbine_Model_R16a/Scripts/

Wind_Turbine_Model_R16a/Scripts/Slide_Prep/

Wind_Turbine_Model_R16a/

Wind_Turbine_Model_R16b/Libraries/Blades/Flex_Blades/Scripts/

Wind_Turbine_Model_R16b/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R16b/Libraries/Generator/

Wind_Turbine_Model_R16b/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R16b/Libraries/Pitch_Controller/

Wind_Turbine_Model_R16b/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R16b/Local_Solver/Pitch_System/

Wind_Turbine_Model_R16b/PCT/

Wind_Turbine_Model_R16b/Scripts/

Wind_Turbine_Model_R16b/Scripts/Slide_Prep/

Wind_Turbine_Model_R16b/

Wind_Turbine_Model_R17a/Libraries/Blades/Flex_Blades/Scripts/

Wind_Turbine_Model_R17a/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R17a/Libraries/Generator/

Wind_Turbine_Model_R17a/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R17a/Libraries/Pitch_Controller/

Wind_Turbine_Model_R17a/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R17a/Local_Solver/Pitch_System/

Wind_Turbine_Model_R17a/PCT/

Wind_Turbine_Model_R17a/Scripts/

Wind_Turbine_Model_R17a/Scripts/Slide_Prep/

Wind_Turbine_Model_R17a/

Wind_Turbine_Model_R12b/Libraries/Blades/

Wind_Turbine_Model_R12b/Libraries/Blades/Flex_Blades/Libraries/

Wind_Turbine_Model_R12b/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R12b/Libraries/Brakes/

Wind_Turbine_Model_R12b/Libraries/Environment/

Wind_Turbine_Model_R12b/Libraries/Geartrain/

Wind_Turbine_Model_R12b/Libraries/Generator/

Wind_Turbine_Model_R12b/Libraries/Main_Controller/

Wind_Turbine_Model_R12b/Libraries/Nacelle/

Wind_Turbine_Model_R12b/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R12b/Libraries/Pitch_Controller/

Wind_Turbine_Model_R12b/Libraries/Tower/

Wind_Turbine_Model_R12b/Libraries/Yaw_Actuation/

Wind_Turbine_Model_R12b/Libraries/Yaw_Controller/

Wind_Turbine_Model_R12b/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R12b/Local_Solver/Pitch_System/

Wind_Turbine_Model_R12b/PCT/

Wind_Turbine_Model_R12b/

Wind_Turbine_Model_R13a/Libraries/Blades/

Wind_Turbine_Model_R13a/Libraries/Blades/Flex_Blades/Libraries/

Wind_Turbine_Model_R13a/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R13a/Libraries/Brakes/

Wind_Turbine_Model_R13a/Libraries/Environment/

Wind_Turbine_Model_R13a/Libraries/Geartrain/

Wind_Turbine_Model_R13a/Libraries/Generator/

Wind_Turbine_Model_R13a/Libraries/Main_Controller/

Wind_Turbine_Model_R13a/Libraries/Nacelle/

Wind_Turbine_Model_R13a/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R13a/Libraries/Pitch_Controller/

Wind_Turbine_Model_R13a/Libraries/Tower/

Wind_Turbine_Model_R13a/Libraries/Yaw_Actuation/

Wind_Turbine_Model_R13a/Libraries/Yaw_Controller/

Wind_Turbine_Model_R13a/Local_Solver/Full_Turbine/

Wind_Turbine_Model_R13a/Local_Solver/Pitch_System/

Wind_Turbine_Model_R13a/PCT/

Wind_Turbine_Model_R13a/

Wind_Turbine_Model_R15b/Libraries/Blades/

Wind_Turbine_Model_R15b/Libraries/Blades/Flex_Blades/Libraries/

Wind_Turbine_Model_R15b/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R15b/Libraries/Brakes/

Wind_Turbine_Model_R15b/Libraries/Environment/

Wind_Turbine_Model_R15b/Libraries/Geartrain/

Wind_Turbine_Model_R15b/Libraries/Generator/

Wind_Turbine_Model_R15b/Libraries/Main_Controller/

Wind_Turbine_Model_R15b/Libraries/Main_Controller/SLDV/

Wind_Turbine_Model_R15b/Libraries/Nacelle/

Wind_Turbine_Model_R15b/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R15b/Libraries/Pitch_Controller/

Wind_Turbine_Model_R15b/Libraries/Tower/

Wind_Turbine_Model_R15b/Libraries/Yaw_Actuation/

Wind_Turbine_Model_R15b/Libraries/Yaw_Controller/

Wind_Turbine_Model_R15b/Local_Solver/Pitch_System/

Wind_Turbine_Model_R15b/PCT/

Wind_Turbine_Model_R15b/RSIM/

Wind_Turbine_Model_R15b/

Wind_Turbine_Model_R16a/Libraries/Blades/

Wind_Turbine_Model_R16a/Libraries/Blades/Flex_Blades/Libraries/

Wind_Turbine_Model_R16a/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R16a/Libraries/Brakes/

Wind_Turbine_Model_R16a/Libraries/Environment/

Wind_Turbine_Model_R16a/Libraries/Geartrain/

Wind_Turbine_Model_R16a/Libraries/Generator/

Wind_Turbine_Model_R16a/Libraries/Main_Controller/

Wind_Turbine_Model_R16a/Libraries/Main_Controller/SLDV/

Wind_Turbine_Model_R16a/Libraries/Nacelle/

Wind_Turbine_Model_R16a/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R16a/Libraries/Pitch_Controller/

Wind_Turbine_Model_R16a/Libraries/Tower/

Wind_Turbine_Model_R16a/Libraries/Yaw_Actuation/

Wind_Turbine_Model_R16a/Libraries/Yaw_Controller/

Wind_Turbine_Model_R16a/

Wind_Turbine_Model_R16b/Libraries/Blades/

Wind_Turbine_Model_R16b/Libraries/Blades/Flex_Blades/Libraries/

Wind_Turbine_Model_R16b/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R16b/Libraries/Brakes/

Wind_Turbine_Model_R16b/Libraries/Environment/

Wind_Turbine_Model_R16b/Libraries/Geartrain/

Wind_Turbine_Model_R16b/Libraries/Generator/

Wind_Turbine_Model_R16b/Libraries/Main_Controller/

Wind_Turbine_Model_R16b/Libraries/Main_Controller/SLDV/

Wind_Turbine_Model_R16b/Libraries/Nacelle/

Wind_Turbine_Model_R16b/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R16b/Libraries/Pitch_Controller/

Wind_Turbine_Model_R16b/Libraries/Tower/

Wind_Turbine_Model_R16b/Libraries/Yaw_Actuation/

Wind_Turbine_Model_R16b/Libraries/Yaw_Controller/

Wind_Turbine_Model_R16b/

Wind_Turbine_Model_R17a/Libraries/Blades/

Wind_Turbine_Model_R17a/Libraries/Blades/Flex_Blades/Libraries/

Wind_Turbine_Model_R17a/Libraries/Blades/Flex_Blades/

Wind_Turbine_Model_R17a/Libraries/Brakes/

Wind_Turbine_Model_R17a/Libraries/Environment/

Wind_Turbine_Model_R17a/Libraries/Geartrain/

Wind_Turbine_Model_R17a/Libraries/Generator/

Wind_Turbine_Model_R17a/Libraries/Main_Controller/

Wind_Turbine_Model_R17a/Libraries/Main_Controller/SLDV/

Wind_Turbine_Model_R17a/Libraries/Nacelle/

Wind_Turbine_Model_R17a/Libraries/Pitch_Actuation/

Wind_Turbine_Model_R17a/Libraries/Pitch_Controller/

Wind_Turbine_Model_R17a/Libraries/Tower/

Wind_Turbine_Model_R17a/Libraries/Yaw_Actuation/

Wind_Turbine_Model_R17a/Libraries/Yaw_Controller/

Wind_Turbine_Model_R17a/

Wind_Turbine_Model_R12b/Scripts/html/

Wind_Turbine_Model_R13a/Scripts/html/