Code covered by the BSD License  

Highlights from
Rotor Dynamics toolbox (RotFE)

image thumbnail

Rotor Dynamics toolbox (RotFE)

by

 

Toolbox models rotating, elastic shafts with disks

beit_sun.m
%      1  2   3    4     5    6        7
NODES=[0 0.01 0.02 0.01 0.02  0.025   0.05 ] ;    


%====================================================================================           
%   (2)                                                                                         
% define ELEMENTS                                                                               
% elements=[node1 node2 d_out d_in material_no ;  % element #1                                  
%   ...    % element #2                                                                         
%    ... ]     % etc.                                                                           
%                                                                                               
% node1, node2 : integer indices of entries in NODES                                            
% d_out, d_in  : [length][M] outer and inner diameters of a hollow shaft                        
% material _no : integer index. defines approp. row in the MATERIAL matrix (table)              
%====================================================================================           
                                                                                                
 ELEMENTS=[ 	1 2  5e-3 1e-3 2                                                                  
    2 3  15e-3 0e-3 1                                                                           
    4 5  25e-3 20e-3 1
    5 6  25e-3 20e-3 1
    3 6  15e-3 0e-3 1                                                                           
    6  7  15e-3 0e-3 1                                                                           
    3  6  25e-3 15e-3 2

  		 ];                                                                          
                                                                                                
                                                                                                
% or for example define uniform shaft                                                           
%  N_NODES=length(NODES);                                                                       
% for q=1:N_NODES-1, ELEMENTS(q,:)=[q q+1 15e-3 0 1]; end                                       
%====================================================================================           
%   (3)                                                                                         
% define material sets                                                                          
% MATERIALS=[E1 rho1 nu1; E2 rho2 nu2; ..... ]                                                          
% units=   E - [Pa] [psi] (young modulus)                                                       
%  rho [Kg/m^3] [lb/in^3] (density)  
%  nu [.] poison ration (0.3 for most metals)                                                           
%                                                                                               
%====================================================================================           
                                                                                                
 MATERIALS=[210e9 7800 0.3; 70e9 3200 0.3];     
 
 %====================================================================================           
%   (4)                                                                                         
% define discs (rigid)                                                                          
% DISCS=[node1 d_out d_in width material_no; % define disc #1                                   
%        node2 ... ]       % etc.                                                                   
% units=   node1- integer, nodes number                                                         
%   d_out, d_in - (length) [m] [in] (diameter)                                                  
%   width   - (length) [m] [in] (disc's width)                                                  
%   material_no - integer, dfines the material set                                              
%                                                                                               
%====================================================================================           
                                                                                                
 DISCS=[	1  0.2 	15e-3 10e-3 1                                                                     
 ]; 
 DISCS=[];
                                                                                                
%====================================================================================           
%   (5)                                                                                         
% define boundry conditions - springs                                                           
% SPRINGS=[node1 Kxx1 Kyy1 Kxy1 Kyx1 Ktt1 Kpp1 Ktp1 Kpt1   % bearing #1                         
%   node2 Kxx2 Kyy2 Kxy2 Kyx2 Ktt2 Kpp2 Ktp2 Kpt2   % bearing #2                                
%     ...       % etc.                                                                          
%  ]                                                                                            
%  where:                                                                                       
% linear (x,y) dofs have the following stiffness matrix                                         
%  Kxxyy=[Kxx Kxy; Kyx Kyy];                                                                    
% angular (p~=- dz/dy, t~=dz/dy)                                                                
%  Kpptt=[Kpp Kpt; Ktp Ktt]                                                                     
%                                                                                               
%  units: node - positive integer, index of node location z=NODES(node)                         
%  K- spring rate  Kg/m,  lb/in etc.                                                            
%                                                                                               
%====================================================================================           
                                                                                                
  SPRINGS=[	1 2e3 	1e3   % the missing entries, e.g. Kxy etc.                                     
    		6 2e3 	2e3];   % are assumed to be zero                                                     
 SPRINGS=[];

%====================================================================================           
%   (6)                                                                                         
% define boundry conditions dashpots                                                            
% DASHPOTS=[node1 Cxx1 Cyy1 Cxy1 Cyx1 Ctt1 Cpp1 Ctp1 Cpt1   % bearing #1                        
%   node2 Cxx2 Cyy2 Cxy2 Cyx2 Ctt2 Cpp2 Ctp2 Cpt2   % bearing #2                                
%  %====================================================================================           
%   (6)                                                                                         
% define boundry conditions dashpots                                                            
% DASHPOTS=[node1 Cxx1 Cyy1 Cxy1 Cyx1 Ctt1 Cpp1 Ctp1 Cpt1   % bearing #1                        
%   node2 Cxx2 Cyy2 Cxy2 Cyx2 Ctt2 Cpp2 Ctp2 Cpt2   % bearing #2                                
%     ...       % etc.                                                                          
%  ]                                                                                            
%  where:                                                                                       
% linear (x,y) dofs have the following stiffness matrix                                         
%  Cxxyy=[Cxx Cxy; Cyx Cyy];                                                                    
% angular (p~=- dz/dy, t~=dz/dy)                                                                
%  Cpptt=[Cpp Cpt; Ctp Ctt]                                                                     
%                                                                                               
%  units: node - positive integer, index of node location z=NODES(node)                         
%  C- dashpot rate  kg/s,                                                                       
%                                                                                               
%====================================================================================           
                                                                                                
 DASHPOTS=[];                                                                                   

%====================================================================================           
                                                                                                
  PROP_DAMP=[];  %   1 percent

%====================================================================================           
%   (7)                                                                                         
% 
% FNodeDir=[node1.dir1 ; node2.dir2; ... nodeQ.dirQ]
%   node1=1,2, ..   dir=1,2,3,4
%    dir1=1->'xx' 3->'yy'  4->'mx' 2->'my'
%

FNodeDir=[	];

%====================================================================================           
%   (8)                                                                                         
% 
% RNodeDir=[node1.dir1 ; node2.dir2; ... nodeQ.dirQ]
%   node1=1,2, ..   dir=1,2,3,4
%    dir1=1->'xx' 3->'yy'  4->'mx' 2->'my'
 

RNodeDir=[	];

%====================================================================================           
%   (9)                                                                                         
% boundry conditions
%
% BCNodeDir=[node1.dir1 ; node2.dir2; ... nodeQ.dirQ]
%   node1=1,2, ..   dir=1,2,3,4
%    dir1=1->'xx' 3->'yy'  4->'mx' 2->'my'
%

BCNodeDir=[ ] ;


%====================================================================================           
%   (10)                                                                                         
% unbalance specification
%
% UNBALANCE=[node1 ux1 uy1 ; node2  ux2 uy2; ... nodeQ uxQ uyQ]   node1=1,2, ..
%
%  nodei specifies the node number in the finite element model
%  uxi  - m*e (mass x displacement) unbalance in the x-direction
%  uyi  - m*e (mass y displacement) unbalance in the y-direction
 

  UNBALANCE=[];
  
%====================================================================================           
%   (11)                                                                                         
% Point mass specification
%
% POINT_MASS=[node1 m Jp Jd]
%  node1=1,2, ..  m-mass [kg] , Jp,Jd - moment of inertia [Kg-m^2]
% nd1=POINT_MASS(:,1); 	% find node
% m=POINT_MASS(:,2); 	% masses
% Jp=POINT_MASS(:,3);  Jd=POINT_MASS(:,4); 

POINT_MASS=[];

Contact us