Code covered by the BSD License  

Highlights from
AM Radio Receiver

5.0

5.0 | 1 rating Rate this file 15 Downloads (last 30 days) File Size: 2.83 KB File ID: #32830

AM Radio Receiver

by

 

08 Sep 2011 (Updated )

Heavily commented simulation of the heterodyne section and demodulating section of an AM receiver

| Watch this File

File Information
Description

An array is created that represents the superposition of three separate RF carriers, each modulated at a different audio frequency. This is the kind of signal that could be expected at the output of the LNA, ie. the entire AM band passes through the RF front end. This signal is multiplied by a local oscillator, passed though an IF filter, and demodulated using a simple envelope detector (half-wave rectifier and single pole LPF). Some plots are created at the end to show the signal at various locations in the receiver.

This file could easily be edited to account for more, less, or different carrier frequencies, modulating signals, etc. The values used in the LO, IF filter, and demodulation sections could all be varied as well to see their effects.

Note: As the program is currently written, the 'Signal Processing Toolbox' and 'Control System Toolbox' are required because of the function calls to butter(), tf(), and c2d(). It is possible that this file could be modified to avoid using those three functions by determining the filter coefficients differently in MATLAB or calculating them using another program, lookup table, etc. and entering them manually.

Required Products Signal Processing Toolbox
Control System Toolbox
MATLAB release MATLAB 7.9 (R2009b)
Tags for This File   Please login to tag files.
Please login to add a comment or rating.
Comments and Ratings (1)
12 Sep 2011 Mr Smart  
Updates
08 Sep 2011

Just changed the summary to indicate that this submission is heavily commented.

09 Sep 2011

Added the Control System Toolbox to the list of required products.

15 Sep 2011

Changed the summary to indicate that the program could be modified to run without the toolboxes.

Contact us