File Exchange

image thumbnail

Microstrip low-pass filter analysis using 3D FDTD code with UPML

version 1.1 (5.51 KB) by

Microstrip low-pass filter analysis is performed by the 3D FDTD + UPML routine.

12 Downloads

Updated

View License

FDTD 3D with UPML is used to calculate scattering coefficients S_{11} and S_{21} for planar microstrip low-pass filter following by the original paper by D. Sheen, S. Ali, M. Abouzahra, J. Kong "Application of the
Three-Dimensional Finite-Difference Time-Domain Method to the Analysis of
 planar Microstrip Circuits", IEEE Trans. on Microwave Theory and Techniques http://dx.doi.org/10.1109/22.55775).
Current code includes some improvements in comparison with the original calculations:
1) UPML instead of Mur ABCs;
2) using real metal (copper) as a patch conductor material instead of PEC;
3) applies matched load at the ends of filter's transmission microstrip lines to prevent physical reflections;
4) do not apply "magnetic wall" or "electric wall" conditions at the Ez source plane.

Comments and Ratings (5)

I can't understand how you can calculate matched load based on microstrip lines. Can you explain more?Thanks!

Ferhat

Ferhat (view profile)

Add pause(0.01) after drawnow if the animation output is very fast on your PC.

Aleksey

Ulrich

Ulrich (view profile)

Updates

1.1

Some labels fixed

MATLAB Release
MATLAB 7.14 (R2012a)

Download apps, toolboxes, and other File Exchange content using Add-On Explorer in MATLAB.

» Watch video